Microstructural stability and age-hardening behavior of Re-added dual two-phase Ni3Al and Ni3V intermetallic alloys

The effect of Re addition on the microstructure and hardening behaviour of the dual two-phase Ni₃Al (L1₂) and Ni₃V (D0₂₂) intermetallic alloy was investigated by scanning electron microscopy, transmission electron microscopy and Vickers hardness test. The two-phase eutectoid microstructure accompanying the Re-rich precipitates were observed in the channel region of the alloys in which Re substituted for Ni but not in those in which Re substituted for Al and V. The concomitant addition of Nb (or Ta) with Re more stabilized the two-phase eutectoid microstructure and consequently more induced the fine precipitates in the channel region. The annealing at temperatures below the eutectoid temperature was necessary to induce the fine precipitates in the channel region and thereby result in the precipitation hardening. The fine precipitation in the channel region and related hardening was attributed to the alloying feature so that Re is soluble in the A1 (fcc) phase at high temperatures and becomes less soluble in the two intermetallic phases decomposed from the A1 phase at low temperatures.     

Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3 ⁵⁺, which is connected through a fourfold rotaxane, was prepared. Heterodimer 3 ⁵⁺ catalyzed ethane oxidation in the presence of H₂O₂ at a relatively low temperature. The site-selective complexation of 3 ⁵⁺ with an additional anionic porphyrin (TPPS⁴⁻) through π–π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3 ⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS⁴⁻ to 3 ⁵⁺ enhanced the catalytic activity.     

Minimal Ellipsoid Circumscribing a Polytope Defined by a System of Linear Inequalities

In this paper, we will propose algorithms for calculating a minimal ellipsoid circumscribing a polytope defined by a system of linear inequalities. If we know all vertices of the polytope and its cardinality is not very large, we can solve the problem in an efficient manner by a number of existent algorithms. However, when the polytope is defined by linear inequalities, these algorithms may not work since the cardinality of vertices may be huge. Based on a fact that vertices determining an ellipsoid are only a fraction of these vertices, we propose algorithms which iteratively calculate an ellipsoid which covers a subset of vertices. Numerical experiment shows that these algorithms perform well for polytopes of dimension up to seven.     

Generalized Longo–Rehren Subfactors and α-Induction

We study the recent construction of subfactors by Rehren which generalizes the Longo–Rehren subfactors. We prove that if we apply this construction to a non-degenerately braided subfactor N⊂M and α^±-induction, then the resulting subfactor is dual to the Longo–Rehren subfactor M⊗M ^opp⊂R arising from the entire system of irreducible endomorphisms of M resulting from α^plusmn;-induction. As a corollary, we solve a problem on existence of braiding raised by Rehren negatively. Furthermore, we generalize our previous study with Longo and Müger on multi-interval subfactors arising from a completely rational conformal net of factors on S ¹ to a net of subfactors and show that the (generalized) Longo–Rehren subfactors and α-induction naturally appear in this context. Received: 11 September 2001 / Accepted: 7 October 2001     

Preparation and properties of the biodegradable graded blend of poly(L‐lactic acid) and poly(ethylene oxide)

We prepared biodegradable poly(ethylene oxide) (PEO)/poly(L ‐lactic acid) (PLLA) graded blends by the dissolution–diffusion process, and discussed the biodegradability and tensile strength of the graded blends by comparing isotropic blend and PLLA only. All the graded blends were degraded more largely than the PLLA only and isotropic blend (PEO: 37.5 wt %), which had the same content as the total content of those graded blends. The graded blend having most excellent wide compositional gradient was degraded most largely with the enzyme. Thus, graded structure of the blends promoted their biodegradabilities large. It was considered that the dissolution of PEO with water increased the surface area attacked by the enzyme, while PEO caught PLLA oligomers to promote the biodegradation of PLLA. Then, the biodegradabilities of the graded blends were suppressed by the increasing crystallinity of PLLA. Furthermore, the strengths of all the graded blends were larger than those of the isotropic blend. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2972–2981, 2007     

Ion-interaction chromatography of several metallocyanide complexes stabilized by adding cyanide in a neutral mobile phase.

Standard solutions (at 10(-5) M levels) of Cu(I)- and Fe(II)-cyanide complexes were stabilized for at least 5 h using 0.5 mM cyanide solution (around pH 9) as a medium. Complexes of Cu(I)- and Fe(III)-cyanide also could be stabilized without any dissociation by adding 1 mM cyanide to an acetonitrile-water (18:82, v/v) mobile phase (pH 7.0) containing 10 mM tetra-n-propylammonium salt (TPA). Under the optimal conditions, the six complexes of Cu(I)-, Ag(I)-, Ni(II)-, Fe(II)-, Fe(III)- and Au(I)-cyanides were resolved from their mixtures within about 45 min, with well-shaped chromatographic peaks.     

Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003     

On global integrability of BMO functions on general domains

Extending results of Staples and Smith-Stegenga, we characterize measurable subsets of a given domainD ⊃R ⁿ on which BMO(D) functions areL ^p integrable or exponentially integrable. In particular, we characterize uniform domains by the integrability of BMO functions. We also remark on the boundedness of domains satisfying a certain integrability condition for the quasihyperbolic metric.     

Non-destructive determination of spontaneously fissioning nuclides by neutron coincidence counting using multichannel time spectroscopy

A non-destructive method for determining the amount of actinoids has been developed. The method is based on thermal neutron coincidence counting and employs a selective detection of neutrons resulting from the spontaneous fission of actinoids. The detection system is described in detail and the measurement results of²⁴⁴Cm as an example are presented. The results show that the measured fission rate of²⁴⁴Cm is consistent with the fission rate calculated from ENDF/B-V data and that the amount of²⁴⁴Cm can be determined within about 5% accuracy even in the presence of a large amount of actinoids, for example, up to 2.6·10⁶, 3.6·10⁴, or 1.6·10³ times in the mass ratio of²³⁹Pu,²⁴¹Am, or²⁴⁰Pu to²⁴⁴Cm, respectively.