Desorption electrospray ionization tissue imaging using heated nebulizing gas and high‐resolution accurate mass spectra

A new method for tissue imaging using desorption electrospray ionization (DESI) mass spectrometry is described. The technique utilizes a DESI source with a heated nebulizing gas and high‐resolution accurate mass data acquired with an LTQ‐Orbitrap mass spectrometer. The two‐dimensional (2D) automated DESI ion source creates images using the ions that are collected under high‐resolution conditions. The use of high‐resolution mass detection significantly improves the image quality due to exclusion of interfering ions. The use of a heated nebulizing gas increases the signal intensity observed at lower gas pressure. The technique developed is highly compatible with soft tissue imaging due to the minimal surface destruction. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of poly(l-lactic acid) with improved thermal stability by sulfonic acid-catalyzed melt/solid polycondensation

Melt/solid polycondensation (MP/SSP) is deemed as an alternative synthetic route besides ring-opening polymerization (ROP) in synthesizing poly(l-lactic acid) (PLLA). However, it is found that PLLA synthesized by MP/SSP has much poorer thermal stability than that by ROP due to more residual Sn(II) metallic catalyst in the former, but sulfonic acids does not show any detrimental effect on the thermal stability of PLLA. To synthesizing PLLA with good thermal stability by MP/SSP, a variety of commercially available sulfonic acids were screened as catalysts in MP/SSP of PLLA. Among these nonmetallic catalysts, it was found that 1,3-propanedisulfonic acid (PSA) and 1,5-naphthalene disulfonic acid (NSA) exhibited satisfactory catalytic reactivity and PLLAs with excellent thermal stability, high molecular weight, little coloration and good optical purity were successfully synthesized by MP/SSP. The decomposition temperature was increased by 80–100 °C in comparison to SnCl₂-catalyzed PLLA, and the thermal stability is comparable to commercial PLLA produced by ROP.     

基于Li-N2电池体系的“连续式”氮气还原合成氨

电化学合成氨近年来受到较多关注, 直接的电化学固氮法(NRR)存在产氨来源不明的问题, 而间接的锂式合成氨(LiNR)被认为是一种可行的固氮方案. LiNR的研究多为电沉积锂, 本工作以Li-N₂电池体系为基础, 利用电池的放电反应固定N₂, 质子源H₂O同时参与反应, 理论上提高了Li-N₂电池的放电电压. 结合充电反应锂盐分解, 构成了清晰的锂循环方案. 研究发现, 当N₂和H₂O共同通入电池, 可以实现连续式的NH₃生产, 且放电电位与理论值接近. 充放电循环显示, 每个循环均可以产生NH₃, 产氨量随循环次数而增加. 该方案可循环利用锂, 对于开发新型的固氮方式有较大的研究与利用价值.     

金属氧化物催化剂上合成气转化中羧酸盐物种促进芳烃的生成

芳烃是重要的化工原料,目前主要通过石油催化裂化和催化重整制得.随着石油资源的消耗以及芳烃的需求日益增长,开发非石油路线制备芳烃势在必行.因此,从煤、天然气和生物质出发,经合成气一步制芳烃(STA)广受关注.将合成气制甲醇的金属催化剂和甲醇制芳烃的分子筛催化剂复合,可以制备双功能催化剂,用于合成气反应可高选择性得到芳烃.然而,关于此过程中芳烃的生成机理仍有争论.目前人们认为,生成芳烃的中间体主要分甲醇和其他含氧物种(乙烯酮,醛类)两种.本文以ZnCrAlOx和H-ZSM-5为模型催化剂,进行合成气制芳烃、甲醇制芳烃和丙烯制芳烃反应,确定了传统的甲醇制芳烃路径不是合成气制芳烃中的主要途径,并通过原位傅里叶变换红外光谱和气相色质谱解释了STA反应中两种活性组分距离越近,芳烃选择性越高的原因,从而提出了在合成气制芳烃过程中芳烃的生成机理.通过比较双功能催化剂上合成气、甲醇以及丙烯的反应性能发现,在甲醇和丙烯转化时,其芳烃选择性远小于合成气转化时的,由此可认为,在合成气制芳烃的路径主要不经由传统的甲醇制芳烃,而是通过烯烃聚合脱氢生成芳烃.红外表征和共进料实验表明,合成气可以在金属催化剂表面生成甲酸盐物种,它可与烯烃反应生成羧酸盐物种,再迁移到分子筛上反应生成芳烃,且羧酸盐物种在分子筛上的芳构化能力要高于丙烯;即使在氢气氛围下,当丙烯的芳构化能力受到氢气极大抑制时,羧酸盐物种仍能高选择性生成芳烃.本文制备了一系列金属催化剂和分子筛物理接近距离不同的双功能催化剂,研究了合成气在双功能催化剂上制芳烃时,金属催化剂和分子筛二者组分的距离对芳烃选择性的影响.随着二者接近距离的增加,芳烃选择性急剧增加;通过GC-MS分析合成气转化时的停留物种,发现随着二者接近距离的增加,羧酸盐物种和甲基环戊烯酮的量明显增加,因此,羧酸盐物种和甲基环戊烯酮物种在生成芳烃中起到了重要的作用.综上所述,我们提出了STA中一条新的芳烃生成路径,并证明了羧酸盐物种是其中重要的中间物种.它经由金属表面的甲酸盐物种和烯烃反应生成,随后迁移到分子筛上生成甲基环戊烯酮物种,再脱水生成芳烃.     

Rapid and label-free classification of pathogens based on light scattering,reduced power spectral features and support vector machine

The rapid identification of pathogens is crucial in controlling the food quality and safety. The proposed system for the rapid and label-free identification of pathogens is based on the principle of laser scattering from the bacterial microbes. The clinical prototype consists of three parts: the laser beam, photodetectors, and the data acquisition system. The bacterial testing sample was mixed with 10 mL distilled water and placed inside the machine chamber. When the bacterial microbes pass by the laser beam, the scattering of light occurs due to variation in size, shape, and morphology. Due to this reason, different types of pathogens show their unique light scattering patterns. The photo-detectors were arranged at the surroundings of the sample at different angles to collect the scattered light. The photodetectors convert the scattered light intensity into a voltage waveform. The waveform features were acquired by using the power spectral characteristics, and the dimensionality of extracted features was reduced by applying minimal-redundancy-maximal-relevance criterion (mRMR). A support vector machine (SVM) classifier was developed by training the selected power spectral features for the classification of three different bacterial microbes. The resulting average identification accuracies of E. faecalis,E. coli and S. aureus were 99%, 87%, and 94%, respectively. The overall experimental results yield a higher accuracy of 93.6%, indicating that the proposed device has the potential for label-free identification of pathogens with simplicity, rapidity, and cost-effectiveness.     

电视摄象机测量误差探讨

本文简述了用电视摄象机进行工业尺寸测量的微分法与拟合法的基本原理,同时详细的讨论了各自所能达到的精度极限。本文用实验验证了理论计算的结果,最后对二维工件测量时,如何根据工件的不同形状与位置以及光学系统的特点,提出了在测量时工件的放置应该注意的问题以及对工件拐角处如何进行处理的方法。     

Accurate optical wavefront reconstruction based on reciprocity of an optical path using low resolution spatial light modulators

A method for high precision optical wavefront reconstruction using low resolution spatial light modulators (SLMs) was proposed. It utilizes an adiabatic waveguide taper consisting of a plurality of single-mode waveguides to decompose an incident light field into simple fundamental modes of the single-mode waveguides. By digital generation of the conjugate fields of those simple fundamental modes a field proportional to the original incident light field might be reconstructed accurately based on reciprocity. Devices based on the method using transparent and reflective SLMs possess no aberration like that of a conventional optic lens and are able to achieve diffraction limited resolution. Specifically on the surface of the narrow end of a taper a resolution much higher than half of the wavelength is attainable. The device may work in linear mode and possesses unlimited theoretical 3D space-bandwidth product (SBP). The SBP of a real device is limited by the accuracy of SLMs. A pair of 8-bit SLMs with 1000 × 1000 = 10⁶ pixels could provide a SBP of about 5 × 10⁴. The SBP may expand by 16 times if 10-bit SLMs with the same number of pixels are employed or 16 successive frames are used to display one scene. The device might be used as high precision optical tweezers, or employed for continuous or discrete real-time 3D display, 3D measurement, machine vision, etc.     

Mo对脱合金制备的Ni-Mo电极骨架结构与析氢性能的影响

采用快速凝固结合脱合金化方法制备了不同Mo含量的纳米多孔Ni-Mo合金,通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）和N₂吸附-脱附分析等对多孔合金的物相、形貌结构及孔径分布进行了表征,并通过线性扫描伏安、Tafel斜率、交流阻抗和循环伏安等方法测试了多孔合金电极的电催化析氢性能.结果显示,多孔合金电极材料在50 mA/cm²电流密度下析氢过电位随着Mo含量的增加先降低后升高,Ni_2.5Mo_2.5合金析氢活性最强,过电位为218 mV,析氢过程由Volmer-Heyrovsky步骤控制,交换电流密度为0.29 mA/cm²,经1000周循环后的极化曲线基本保持原状,50 mA/cm²电流密度下过电位增加3.67%,表现出优良的析氢稳定性.     

An Unusual Skeletal Rearrangement in the Biosynthesis of the Sesquiterpene Trichobrasilenol from Trichoderma

The skeletons of some classes of terpenoids are unusual in that they contain a larger number of Me groups (or their biosynthetic equivalents such as olefinic methylene groups, hydroxymethyl groups, aldehydes, or carboxylic acids and their derivatives) than provided by their oligoprenyl diphosphate precursor. This is sometimes the result of an oxidative ring‐opening reaction at a terpene‐cyclase‐derived molecule containing the regular number of Me group equivalents, as observed for picrotoxan sesquiterpenes. In this study a sesquiterpene cyclase from Trichoderma spp. is described that can convert farnesyl diphosphate (FPP) directly via a remarkable skeletal rearrangement into trichobrasilenol, a new brasilane sesquiterpene with one additional Me group equivalent compared to FPP. A mechanistic hypothesis for the formation of the brasilane skeleton is supported by extensive isotopic labelling studies.     

Hydration-Facilitated Fine-Tuning of the AIE Amphiphile Color and Application as Erasable Materials with Hot/Cold Dual Writing Modes

Hydration water greatly impacts the color of inorganic crystals, but it is still unknown whether hydration water can be utilized to systematically manipulate the emission color of organic luminescent groups. Now, metal ions with different hydration ability allow fine-tuning the emission color of a fluorescent group displaying aggregation induced emission (AIE). Because the hydration water can be removed easily by gentle heating or mechanical grinding and re-gained by solvent fuming, rewritable materials can be fabricated both in the hot-writing and cold-writing modes. This hydration-facilitated strategy will open up a new vista in fine-tuning the emission color of AIE molecules based on one synthesis and in the design of smart luminescent devices.