TBOR-shaped electro-optic modulator with dual output based on double-layer graphene

We proposed an electro-optic modulator with two-bus one-ring (TBOR) structure to improve the extinction ratio and reduce insert loss. It has a dual output compared with one-bus one-ring structure. In addition, double-layer graphene makes it possible for the modulation in the visible to mid-infrared wavelength range. It shows that this new electro-optic modulator can present two switching states well with low insertion loss, high absorption and high extinction ratio. At $\lambda =1550\text{ nm}$, when the switching states are based on the chemical potential, ${\mu }_{\mathrm{c}}=0.38\text{ eV}$ and ${\mu }_{\mathrm{c}}=0.4\text{ eV}$, the insertion losses of both output ports are less than 2 dB, the absorption of the output port coupled via a micro-ring reaches 45 dB and the extinction ratio reaches 14 dB. When the refractive index of the dielectric material is 4.2, the applied voltage will be less than 1.2 V, thus can be used in low-voltage CMOS technology.     

High photosensitivity in cis-polyphenylacetylene films irradiated with 60Co γ-ray

This paper reports that ⁶⁰Co γ-ray irradiation can convert cis-polyphenylacetylene (cis-PPA) films prepared with rare-earth coordination catalysts to highly photosensitive materials. The dependence of the photosensitivity on irradiation dose, preparation methods, and microstructure of the PPA films has been investigated by means of a potential discharge technique. The photosensitivity was enhanced with increasing irradiation dose. The critical dose to produce a light response was 5 × 10³ Gy. The maximum surface potential discharge rate was 618 V/s, and the dark decay was approximately 2 V/s for cis-PPA films irradiated with ⁶⁰Co γ-ray (dose: 2 × 10⁵ Gy). The cis-transoidal-PPA and an electrophotographic photoreceptor device incorporating cis-PPA showed a higher irradiation effect. The structure and properties of ⁶⁰Co γ-ray irradiated rare-earth PPA films are similar to the unirradiated films.     

改性壳聚精膜用于醇水混合液分离的研究──Ⅲ．超细粉末填充壳聚精膜

首次制备了用Ｓｉ３Ｎ４，ＳｉＯ２，ＴｉＨ４超细粉末填充的改性壳聚精膜，并将其用于乙醇／水混合液的分离中。实验表明壳聚糖膜经超细粉末填充后强度增大，溶胀度减小。用于乙醇／水混合液渗透蒸发分离时，分离因子和渗透通量都有提高，并在填充量为１６．７％附近出现极大值。随着料液中乙醇含量的增大，渗透通量减小，分离因子增大；随着料液温度的升高渗透通量显著增大，分离因子则稍有下降。并简单讨论了超细粉末在乙醇／水混合液分离中的作用。     

Synthesis and magnetic properties of novel polymeric complexes containing bithiazole rings

A novel linear polymer (PFABT) containing bithiazole rings was synthesized by polycondensation of 2,2′‐diamino‐4,4′‐bithiazole (DABT) and formaldehyde. The complexes of PFABT with two transition metal ions (Fe²⁺, Cu²⁺) were prepared for the first time. The polymer was determined through FT‐IR, ¹H‐NMR and elemental analysis (EA), and the complexes were characterized by FT‐IR. The magnetic behaviors of these complexes were measured as a function of magnetic field strength (0–50 kOe) at 4 K and as a function of temperature (4–300 K) under an applied magnetic field of 30 kOe. The results show that PFABT‐Cu²⁺ is a ferromagnet while PFABT‐Fe²⁺ is an anti‐ferromagnet. Copyright © 2007 John Wiley & Sons, Ltd.     

THE POLYMERIZATION OF EPICHLOROHYDRIN WITH Nd(i-oPr)_3-Al(i-Bu)_3 SYSTEM

Epichlorohydrin (ECH) was polymerized with a rare earth catalytic system: Nd (i-OPr)_3-Al (i-Bu)_3. The effects of Al/Nd molar ratio, solvents, the polymerization time and temperature,the aging time and temperature of the catalyst preparation were studied. The results showed thatat a low Al/Nd molar ratio (4) of the Nd(i-OPr)_3-Al(i-Bu)_3 system ECH polymerized at a lowtemperature (248K) with a high conversion. The average molecular weight ofpolyepichlorohydrin (PECH) ranged from 1×10~5 to 3×10~5.     

New coordination catalysts based on rare earth compounds for polymerization of 1-octene

The study of rare earth coordination catalysts for polymerization of 1-octene has been successfully carried out for the first time. Some features and kinetic behavior of polymerization of 1-octene by Nd(naph)₃–AIEt₃ catalyst system in tetrachloro-methane are described. The overall polymerization activation energy E_a measured was 74.5 kJ/mol and the rate equation could be expressed as R_p = k_p [Nd] [M] (k_p = 3.21 × 10^?3 L/mol s, at 50°C). The catalytic activity of various rare earth elements in Ln (naph)₃ and ligands in NdL₃ for the polymerization was compared. A 1-octene oligomer with double bonds was obtained. It is either a white or pale yellow waxy semi-solid. Its number-average molecular weight is about 10³ and the molecular weight distribution is less than 2.     

离子液体支载稀土催化剂催化 2,2-二甲基-三亚甲基碳酸酯均聚及其与ε-己内酯的共聚

首次合成了离子液体支载稀土催化剂,并探讨了其催化2,2-二甲基-三亚甲基碳酸酯(DTC)均聚及其与ε-己内酯(ε-CL)的共聚,结果表明该新型催化剂能有效地催化DTC的均聚及其与ε-CL的共聚.研究了不同稀土以及加料顺序等反应条件对聚合的影响,发现轻稀土的催化活性比重稀土高,其中离子液体支载La催化剂的催化活性最高,而通过控制不同的加料顺序可以制备DTC和ε-CL的无规及嵌段共聚物.对共聚物结构进行了表征.     

取代茚基稀土配合物/添加剂体系催化丙烯腈聚合

研究了取代茚基稀土配合物 /添加剂体系对丙烯腈的聚合 ,发现季胺盐及芳氧钠是取代茚基二价稀土配合物催化丙烯腈聚合的有效添加剂 ,其中Me3NC1 6 H33Br效果最好 ,5种二价稀土配合物 (C5H9C9H6 ) 2 Yb (THF) 2 ,(C5H9C9H6 ) 2 Sm (THF) 2 ,KSm (C5H9C9H6 ) 3(THF) 3,(PhCH2 C9H6 ) 2 Sm(THF) 2 和 (CH3CH2 C9H6 ) 2 Sm (THF) 2 与Me3NC1 6 H33Br构成的催化体系对于丙烯腈聚合都显示出好的催化活性。对(C5H9C9H6 ) 2 Yb(THF) 2 /Me3NC1 6 H33Br体系而言 ,在丙烯腈中当催化剂用量为 2× 10 - 5mol·g - 1时 ,丙烯腈聚合的最大转化率为 61%。     

稀土配位催化马来酸酐-苯乙烯-N-苯基马来酰亚胺三元共聚合

采用稀土配位催化剂研究了马来酸酐、苯乙烯和N 苯基马来酰亚胺的三元共聚合反应 .考察了Al La物质的量的比、不同稀土元素、催化剂浓度、聚合反应时间、单体配比等因素对共聚合反应的影响 .利用核磁、红外、热分析等方法对共聚物进行了初步的表征     

超高分子量聚苯乙烯的合成和聚合反应动力学

杯芳烃钕与Mg(n Bu) 2 、HMPA所组成的三元络合催化剂用于苯乙烯配位聚合能以高收率制得超高分子量聚苯乙烯 .以甲苯为溶剂 ,在一定条件下制成三元配位催化剂 ,当 [Nd]=8× 10 - 4mol L ,[St]=4 .0mol L ,Mg Nd =2 0 .0 (摩尔比 ) ,HMPA Mg =1.0 (摩尔比 ) ,5 0℃聚合 4 5min ,聚合转化率可达到 80 %左右 .所得聚苯乙烯的重均分子量高达 2 10× 10 4 ,分子量分布指数为 1.6 1.间规聚苯乙烯含量为 81% .动力学研究表明 ,聚合反应速率与单体和主催化剂 杯 [6 ]芳烃钕的浓度分别呈 1次方关系 ,聚合反应的表观活化能为 4 1.7kJ mol