乙烯系单体自由基聚合的阻聚效应——Ⅸ.受阻胺-醌类电荷转移络合物对甲基丙烯酸甲酯自由基聚合的阻聚及历程

用膨胀计法研究了西氯苯醌(CA)、苯醌(BQ)与受阻胺二异丙胺(DIPA)、2,2,6,6-四甲基-4-羟基哌啶(TMP)形成的电荷转移络合物(CTC)对偶氮二异丁腈(AIBN)引发的甲基丙烯酸甲酯(MMA)自由基聚合阻聚效应。结果表明,CA-DIPA、CA-TMP、BQ-DIPA和BQ-TMP对MMA的自由基聚合均产生较单独的醌或胺更显著的阻聚能力。其中以CA-DIPA阻聚效果更佳。比较了MMA在苯或乙腈中的溶液聚合,得类似结果。初步讨论了受阻胺-醌电荷转移络合物对MMA自由基聚合的阻聚反应机理。     

乙烯系单体自由基聚合的阻聚效应──XIX．取代哌啶羟胺和二叔丁基羟胺及其稳定自由基对苯乙烯－丙烯腈共聚合的影响

研究了二叔丁基羟胺（ＤＴＢＨＡ），二叔丁基氮氧自由基（ＤＴＢＮＯ·），２，２，６，６－四甲基－４－羟基哌啶羟胺（ＴＭＨＰＨＡ）和２，２，６，６－四甲基－４－羟基哌啶－１－氧自由基（ＴＭＨＰＯ·）对过氧化苯甲酰（ＢＰＯ）６０℃引发的苯乙烯（Ｍ１）－丙烯腈（Ｍ２）共聚合的阻聚行为．结果表明，这些阻聚剂对Ｓｔ－ＡＮ共聚均表现良好的阻聚行为，其中氮氧自由基优于相应羟胺．同时观察到Ｓｔ—ＡＮ竞聚率的改变，羟胺使ｒ１有所降低，ｒ２略有增大．但相应的氮氧自由基是相反结果．阻聚剂为２００ｐｐｍ时，共聚物中的恒比共聚点由对照实验的０．６１９变化为０．５３３，０．６４５，０．５８９和０．６９８相对于ＤＴＢＨＡ，ＤＴＢＮＯ·，ＴＭＨＰＨＡ和ＴＭＨＰＯ·．     

氯化血红素/热解石墨电极对单加氧酶的模拟——Ⅱ.苯在氯化血红素/热解石墨电极上的电催化羟基化作用

实验结果支持了血红素(Ha.)的单体(monomer)吸附态对分子氧起电催化还原作用的观点;并表明,H_2O_2的电催化还原主要是在Ha.的二聚体(dimer)吸附态上进行。Ha./电极对苯一步羟基化生成苯酚有电催化作用。     

固态氧化物电解池中碳-分子电化学转化为可再生燃料

近年来,随着社会环保意识的迅速提高以及对可再生能源利用能力的大幅增强,以燃料电池和电解池为代表的电化学技术已经逐渐在能源的存储、转化和利用方面发挥着不可或缺的独特作用.其中,固态氧化物电解池经过多年的发展,在装置成本和工作效率上取得了长足的进步,在储能转化方面具有重要的潜力.与此同时,伴随着《巴黎协定》签订以来各国的“碳中和”路线图逐渐出台,利用相对廉价易得的可再生电能,将二氧化碳(CO₂)和甲烷(CH₄)等碳-(C1)分子电解转化为高附加值的可再生燃料(如水煤气、乙烯等),对于碳中和目标的实现具有重要的意义.因此,C1分子电化学转化的研究成为了当下重点关注的研究领域,许多重要的研究成果和技术进步在过去几年中不断涌现.固态氧化物电解池作为一种代表性的C1分子电解和转化平台,也日渐引起相关领域研究人员的关注和兴趣.与传统的C1分子催化转化方法相比,基于固态氧化物电解池的电解转化技术具有两个重要优点:高能量转换效率与体系抗中毒能力.这两个特性作为体系稳健性的基石,保障了C1分子转化为可再生燃料的反应过程的长期可持续性.本文首先简要回顾了固态氧化物电解池的前沿技术与发展,并从电解池系统分类、反应体系的特征和反应体系发展的前景与挑战这三个方面,简要介绍了近年来基于固态氧化物电解池体系的C1分子电化学转化的代表性工作.CO₂与CH₄作为廉价易得的C1分子的代表,其转化因其反应分子惰性及反应过程不可控性而广受研究者关注,本文重点关注了在固态氧化物电解池中CO₂,CO₂/H₂O和CH₄三个体系的电化学反应过程和近期研究进展,希望可为相关研究人员未来设计更合适的催化剂和构建更优的电解池结构提供有益的参考.本文还针对目前固态氧化物电解池体系在C1分子转化领域所面临的挑战,提出了未来的一些可能的研究方向,以期助力研究者在不远的将来实现C1分子电解生产可再生燃料的实用化.     

石墨烯玻璃透明薄膜加热特性

Graphene has become a research focus in recent years owing to its excellent characteristics, and glass is a commonly used material with high transparency and low cost. Graphene glass combines the excellent properties of both graphene and glass; graphene glass has not only high thermal conductivity, high electrical conductivity, and good surface hydrophobicity but also exhibits superior electrothermal conversion and wide-spectrum high-light-transmittance characteristics. Therefore, the study of graphene glass films is of theoretical value and practical significance. In this study, a high-purity glass-based (JGS1 quartz glass) multilayer graphene film was developed based on an atmospheric-pressure chemical vapor deposition (APCVD) method, and its electrical characteristics, light transmittance, and electrical heating characteristics were experimentally investigated in detail. The results show that graphene glass with different surface resistance values obtained through direct growth on a high-purity quartz glass substrate using the APCVD method, not only has excellent uniformity and quality, but also has considerably flat and high transmittance across the entire visible light region and exhibits excellent heating performance and fast response time. For graphene glass with a surface resistance of 1500 Ω·sq^-1, the light transmittance can reach 74%, and the saturation temperature can rise to 185 ℃ by applying a bias voltage of 40 V. In addition, when the resistance value of the graphene glass is 420 Ω·sq^-1, the graphene glass reaches a high saturation temperature of 325 ℃ in 40 s, and the corresponding heating rate can exceed 18 ℃·s^-1, achieving a significantly higher heating rate than other heating films at the same voltage. Compared with the polyethylene-terephthalate- (PET-) based and silicon-based graphene films obtained by the transfer, graphene glass has a higher saturation temperature, shorter thermal response time, and faster heating rate. Furthermore, graphene glass exhibits better heating cycle stability and longer-term heating stability at a constant voltage. In addition, an experiment using the graphene glass to thermally tune the wavelength of a vertical-cavity surface-emitting laser was conducted and gave good results. The position of the laser peak controlled by the graphene glass was red-shifted by 1.78 nm by applying a voltage of 20 V, and the wavelength tuning efficiency reached 0.059 nm·℃^-1. Compared with PET-based and silicon-based graphene films, the actual electrical heating capacity of graphene glass increased by 195%. These experimental findings demonstrate that graphene glass transparent films with excellent electric heating characteristics can be used in various transparent electric heating fields and have relatively wide application prospects.     

Expedient synthesis of the tetracyclic core of ent-nakadomarin A

An efficient eight-step assembly of the tetracyclic core (ABCD rings) of ent-(+)-nakadomarin A, a bioactive hexacyclic marine alkaloid, has been realized with Sonogashira coupling, platinum(II)-promoted cascade cyclizations, and saturation of a challenging carbon-carbon double bond through a hydroboration/oxidation/xanthate formation/Barton-McCombie deoxygenation sequence as key transformations.     

HIAF随机冷却系统slot-ring型pickup/kicker及相应合路器/功分器的设计与仿真

为降低束流发射度,提高束流强度,得到高品质的束流,强流重离子加速器装置(HIAF)高精度环形谱仪(SRing)将建造随机冷却系统。随机冷却系统的关键硬件pickup/kicker在一定程度上决定了其冷却效率。本工作讨论了随机冷却系统pickup/kicker的具体作用及设计指标,介绍了分路阻抗概念。SRing随机冷却系统采用周期性单元结构slot-ring模型,利用高频结构仿真(HFSS)软件对其进行建模并仿真优化。通过对不同结构参数进行扫参,确认了slot-ring结构各参数对pickup/kicker分路阻抗值的影响。仿真结果表明,slot-ring结构有较高的分路阻抗,适用于SRing随机冷却系统。同时,考虑到pickup/kicker工作带宽内分路阻抗的平坦度,提出了采用不同尺寸slot-ring结构进行组合的方式来优化其平坦度。最后设计并加工实测了该slot-ring结构相匹配的十六路功率分配器/功率合成器,实测结果表明:该功分器/合路器具有各端口输出幅度平坦度较好、隔离度大、插入损耗低、电压驻波比小等特点,满足SRing随机冷却系统的要求。     

真空中聚苯乙烯交联材料的沿面闪络特性

搭建了真空沿面闪络实验平台,在实验平台上对聚苯乙烯交联材料进行了真空沿面闪络性能测试,探讨了材料的真空沿面闪络电压强度与材料结构、材料内部微量杂质的关系。实验结果表明:随着聚苯乙烯材料交联程度的增加,其真空沿面闪络电压强度先增加后减少;聚苯乙烯交联材料分子链结构对其真空沿面闪络电压强度有重要影响;材料的真空沿面闪络电压强度还与交联材料内部异质分子数量有关系,微量异质结构的分子将导致沿面闪络电压强度的下降。     

相转移反应合成聚[α,γ-二氰基对苯三亚甲基]及其热解产物的研究

研究了对苯二乙腈与二氯甲烷在苄基三乙基氯化铵(BTEAC)存在下的相转移反应.合成了一种新的聚合物聚[α,γ-二氰基对苯三亚甲基](PCPTM)[Ⅰ].(PCPTM)经水解和不同温度下热处理,分别得相应水解和热解产物[Ⅱ]和[Ⅲ].对得到的聚合物进行元素分析、红外光谱和TGA分析,其中聚合物[Ⅲ]具有顺磁共振信号、较好的热稳定性和优良的半导体性质.