The First Example of Dinuclear Co(III) Complexes Containing Crown Ether Moieties

The new dinuclear, octahedral cobalt(III) complexes have been synthesized and then their ability to interact with 4,4′-trimethylene dipyridine investigated. The ¹H and ¹³C-NMR, IR and elemental analysis data indicated that the cobalt(III) complexes are dinuclear.     

Optimization and Validation of RP-LC/UV–VIS Detection Method for Simultaneous Determination of Fat-Soluble Anti-Oxidant Vitamins, all-trans-Retinol and α-Tocopherol in Human Serum: Effect of Experimental Parameters

A versatile isocratic reversed-phase liquid chromatographic/ultraviolet–visible detection method for simultaneous determination of all-trans-retinol and α-tocopherol in human serum was developed and validated after optimization of various chromatographic conditions and other experimental parameters. Analytes were separated on a Kromasil 100 RP₁₈ (150 × 4.6 mm, 5 μm) analytical column protected by a Perkin Elmer RP₁₈ (30 × 4.6 mm, 10 μm) guard cartridge. The mobile phase, methanol–water (96:04 v/v) was pumped at a flow rate of 2.2 mL min^?1 and the column eluents were monitored at the wavelength of 292 nm using retinyl acetate (1.0 μg mL^?1) as the internal standard for both analytes. Sample preparation was based on protein precipitation and stabilization with 2,6-bis(1,1-dimethylethyl)-4-methylphenol/ethanol and a two step extraction process using n-hexane followed by dichloromethane as extraction solvents. Sample size was kept 20 μL and separation of analytes was achieved in less than 7 min. The present method demonstrated acceptable values for specificity/selectivity, linearity within the expected concentration range, recovery, precision, sensitivity, stability of solutions, robustness, and system suitability specifications and tests. The method was used for monitoring all-trans-retinol and α-tocopherol concentrations in human serum samples and could also be applied to other sample matrices such as brain slices and cosmetic products if attention is paid to the extraction procedure.     

Tandem nitrosation/cycloaddition of heterocyclic enamines using nitrolic acids

The reaction of alkylidenepyrrolidines with nitrolic acids gives rise to the formation of novel 3,7a-disubstituted (1,2,4-oxadiazol-5-yl)-5,6,7,7a-tetrahydropyrrolo[1,2-d][1,2,4]oxadiazoles. A plausible mechanism for this reaction is proposed, which features nitrosation of the enamine by the nitrous acid that is liberated from the nitrolic acid.     

XYZH systems as potential 1,3-dipoles. Part 62: 1,3-Dipolar cycloaddition reactions of metallo-azomethine ylides derived from α-iminophosphonates

Metallo-azomethine ylides, generated from iminophosphonates in combination with LiBr or AgOAc and bases Et₃N, DBU, t-butyl tetramethylguanidine(BTMG) undergo cycloaddition to give dialkyl pyrrolidine-2-phosphonates along with the corresponding Michael adduct in some cases. Cycloadditions with the chiral dipolarophile 5R-(1′R,2′S,5′R-menthyloxy)-2-(5H)-furanone (MOF) afforded enantiopure cycloadducts.     

In situ palladium/N-heterocyclic carbene complex catalyzed carbonylative cross-coupling reactions of arylboronic acids with 2-bromopyridine under CO pressure: efficient synthesis of unsymmetrical arylpyridine ketones and their antimicrobial activities

Transition Metal Chemistry - The carbonylative Suzuki cross-coupling of 2-bromopyridine with various boronic acids to prepare unsymmetrical arylpyridine ketones has been carried out using...     

Platinum species in the pores of NaX, NaY and NaA zeolites studied using EPR, XAS and FTIR spectroscopies

The results of X-band EPR, X-ray absorption and Fourier transform infrared spectroscopy on Pt(NH(3))(4)(2+) exchanged NaX, NaY and NaA zeolites reveal after oxygen calcination at 573 K that diamagnetic Pt(2+) is not the only product. Calcination provides Pt(3+) cations, but depending on the heating rate, the decomposition of amino groups during calcination also produces hydrogen that reduces Pt(3+) to Pt(2+) and Pt(+). NaX (Si/Al = 1.23) has a more negative framework charge than NaY (Si/Al = 2.31), so Pt(3+) can be stabilized only in NaX, whereas lower oxidation states of Pt such as Pt(+) can be stabilized in both, NaX and NaY, and neither of the paramagnetic Pt cations are stabilized in NaUSY (Si/Al = 3). The autoreduction process allows controlling the number of Pt(3+) and Pt(+) in the NaX zeolite by changing the calcination heating rate: a heating rate of 1.25 K min(-1) gives only Pt(+), but 0.5 K min(-1) gives a Pt(3+)/Pt(+) ratio close to 1. The structure of the support is also important for the synthesis of Pt species. While isolated paramagnetic Pt ions were stabilized in faujasite zeolites (NaX and NaY), a paramagnetic Pt dimer was obtained in a Linde type A zeolite (LTA, Si/Al = 1) by applying the same preparation methods. The fraction of paramagnetic Pt species which were characterized by X-band EPR spectroscopy amounts to 2-18% of the total Pt in the zeolites, the remaining Pt must be diamagnetic.     

Prediction of retention times and peak widths in temperature-programmed gas chromatography using the finite element method

Optimization of separations in gas chromatography is often a time-consuming task. However, computer simulations of chromatographic experiments may greatly reduce the time required. In this study, the finite element method was used to predict the retention times and peak widths of three analytes eluting from each of four columns during chromatographic separations with two temperature programs. The data acquired were displayed in predicted chromatograms that were then compared to experimentally acquired chromatograms. The differences between the predicted and measured retention times were typically less than 0.1%, although the experimental peak widths were typically 10% larger than expected from the idealized calculations. Input data for the retention and peak dispersion calculations were obtained from isothermal experiments, and converted to thermodynamic parameters.     

Synthesis and characterization of the free ligand 5,6:13,14-dibenzo-9,10-benzo(15-crown-5)-2,3-bis(hydroxyimino)-7,12-dioxo-1,4,8,11-tetraazacyclotetradecane and its mono and tri nuclear complexes

The novel (E,E)-dioxime 5,6:13,14-dibenzo-9,10-benzo(15-crown-5)-2,3-bis(hydroxyimino)-7,12-dioxo-1,4,8,11-tetraazacyclotetradecane (H₂L) has been synthesized by the reaction of 4′,5′-diaminobenzo(15-crown-5) with N,N′-bis(2-carbomethoxyphenyl)diaminoglyoxime (1). Only mononuclear Co^III and Ru^II complexes with a metal/ligand ratio of 1:2 have been isolated. The cobalt(III) complex bridged with BF₂⁺ is achieved with H-bonded cobalt(III) complex and borontrifluoride ethyl ether complex. The reaction of BF₂ bridged cobalt(III) complex with bis(benzonitril)palladium(II) chloride gives a trinuclear complex. The structures of dioxime and its complexes are proposed according to elemental analyses, ¹H and ¹³C-NMR, IR and mass spectral data.     

Synthesis and characterization of 2,3-bis(hydroxyimino)-1,2,3,4-tetrahydro-pyrido[2,3-b]pyrazine and its nickel(II), cobalt(II), copper(II), palladium(II), cadmium(II) and cobalt(III) complexes

Summary 2,3-Bis(hydroxyimino)-1,2,3,4-tetrahydro-pyrido[2,3-b]pyrazine (H₂L), prepared from 2,3-diaminopyridine and cyanogen-di-N-oxide has been converted into nickel(II), palladium(II), copper(II), cobalt(II), and cobalt(III) complexes (H₂L) with a 12 metal:ligand ratio. The ligands coordinate through the two N atoms, as do most vicinal dioximes. [(LH)Cl(H₂O)Cd], contains a six-membered chelate ring. [Co(HL)₂(L)Cl] has also been prepared using triphenylphosphine, triphenylarsine, thiophene and chloride as axial ligands. The structure of thevic-dioxime and its complexes are proposed on the basis of elemental analysis, i.r.,¹H-n.m.r. and uv-visible measurements.