元回归模型中最大值点的BRPA估计的收敛速度

BRPA估计是Changchien (1990)提出的一种具有良好性质的回归函数最大值点的估计, Chen, Huang and Huang (1996), Bai and Huang (1999), 吴and王(2000)和Bai, Chen and Wu (2003)分别讨论了BRPA的极限性质\bd 本篇文章中, 我们在很一般的条件下研究了$x$为多维向量时BRPA估计的收敛速度, 推广了Bai, Chen and Wu (2003)的结果     

红外光谱中溶剂效应机理初探——配位机制的提出

本文就红外光谱中溶剂效应机理提出了溶质和溶剂分子间的瞬时配位作用机制，认为同－溶质在不同溶剂中的振动波数不同，是由于这种瞬时配位作用改变了溶质价电子运动状态所致。据此提出了溶剂效砂的定量关系式，测定了七种溶剂配位效应常数。用这一套经验参数处理了几种取代苯甲酸的羰基伸缩振动的溶剂效应，得较好的线性关系。还发现羰基的振动波数与取代基的Ｈａｍｍｅｔｔ常数σ之间，羰基伸缩振动对溶剂效应的敏感度与σ之间，Ｈ     

Convergence rate of the best-r-point-average estimator for the maximizer of a nonparametric regression function

The best-r-point-average (BRPA) estimator of the maximizer of a regression function, proposed in Changchien (in: M.T. Chao, P.E. Cheng (Eds.), Proceedings of the 1990 Taipei Symposium in Statistics, June 28–30, 1990, pp. 63–78) has certain merits over the estimators derived through the estimation of the regression function. Some of the properties of the BRPA estimator have been studied in Chen et al. (J. Multivariate Anal. 57 (1996) 191) and Bai and Huang (Sankhya: Indian J. Statist. Ser. A. 61 (Pt. 2) (1999) 208–217). In this article, we further study the properties of the BRPA estimator and give its convergence rate under some quite general conditions. Simulation results are presented for the illustration of the convergence rate. Some comparisons with existing estimators such as the Müller estimator are provided.     

低温和低压下水热合成Na4Zr2(SiO4)3

以ZrOCl_2·8H_2O,Na_2SiO_3·9H_2O和NaOH为原料,在250℃约100bar的条件下,水热晶化合成出Na_4Zr_2(SiO_4)_3,并生长相应的单晶。讨论了水热反应及其条件.产物借助于XRD,Raman,~(29)Si MAS NMR以及阻抗谱技术进行了研究.结果表明产物具有与其他方法制备的Na_4Zr_2(SiO_4)_3相同的性质.     

大庆渣油族组分非等温热反应的研究

采用动态热重分析法在升温速率为６．２Ｋ·ｍｉｎ￣（－１）及惰性气流量１００ｃｍ￣３·ｍｉｎ￣（－１）的条件下，对大庆渣油族组分的热转化行为进行了考察，获得了族组分的热转化速率峰值、速率峰值处的反应温度、转化率和剧裂分解温度区间等动力学基本数据以及各族组分的生焦性能。数据分析表明，族组分的热反应活性顺序为：饱和分＞胶质＞芳香分＞沥青质。在大庆渣油族组分热转化的两个温区内，采用分段一级动力学模型较好地拟合了实验数据，确定了各族组分在两个温区内的热反应动力学参数。     

A multi-color and white-light emissive cucurbituril/ terpyridine/ lanthanide supramolecular nanofiber

The enhanced lanthanide white-emission in solid by cucurbituril-based supramolecular assembly may provide a new strategy for smart light-emitting materials.     

Facile strategy for synthesis of silica/polymer hybrid hollow nanoparticles with channels

The silica/polymer hybrid hollow nanoparticles with channels and gatekeepers were successfully fabricated with a facile strategy by using thermoresponsive complex micelles of poly(ethylene glycol)-b-poly(N-isopropylacrylamide) (PEG-b-PNIPAM) and poly(N-isopropylacrylamide)-b-poly(4-vinylpyridine) (PNIPAM-b-P4VP) as the template. In aqueous solution, the complex micelles (PEG-b-PNIPAM/PNIPAM-b-P4VP) formed with the PNIPAM block as the core and the PEG/P4VP blocks as the mixed shell at 45 °C and pH 4.0. After shell cross-linking by 1,2-bis(2-iodoethoxyl)ethane (BIEE), tetraethylorthosilicate (TEOS) selectively well-deposited on the P4VP block and processed the sol-gel reaction. When the temperature was decreased to 4 °C, the PNIPAM block became swollen and further soluble, and the PEG-b-PNIPAM block copolymer escaped from the hybrid nanoparticles as a result of swelled PNIPAM and weak interaction between PEG and silica at pH 4.0. Therefore, the hybrid hollow silica nanoparticles with inner thermoresponsive PNIPAM as gatekeepers and channels in the silica shell were successfully obtained, which could be used for switchable controlled drug release. In the system, the complex micelles, as a template, could avoid the formation of larger aggregates during the preparation of the hybrid hollow silica nanoparticles. The thermoresponsive core (PNIPAM) could conveniently control the hollow space through the stimuli-responsive phase transition instead of calcination or chemical etching. In the meantime, the channel in the hybrid silica shell could be achieved because of the escape of PEG chains from the hybrid nanoparticles.     

Lixiscope及几种材料的X射线吸收特性研究

介绍Lixiscope及模拟系统,测量了钛片(Ti)、玻璃板、镍片(Ni)和铝片(Al)对峰值能量为40keV的X射线的吸收持性,指出平板式X射线像增强器输入窗口材料选择的原则。     

紫外光对MCP增益特性测量的影响

介绍用ＵＶ光电法测量ＭＣＰ电子增益时，ＵＶ透过金薄膜的附加输出给测量带来的影响，给出了实验结果并进行初步分析，最后指出确保增益测量结果可靠性的途径。