电站锅炉中粉煤灰与SiC耐火材料结渣性研究

本文主要研究含Cr2O3的硅酸锆结合SiC耐火材料的抗粉煤灰侵蚀规律,将两种不同的粉煤灰平铺在SiC耐火材料上,作用温度为1250～1450 ℃,保温时间为40小时,然后用视频光学显微镜和XRD衍射图谱来确定其显微结构和物相组成,初步实验结果表明SiC质耐火材料具有较好的抗煤灰侵蚀性能.     

固体酸催化合成4-羟基苯基-1''''-O-D-吡喃葡萄糖苷

报道了一种简便易行的绿色合成4-羟基苯基-1'-O-D-吡喃葡萄糖苷(即熊果苷及其端基异构体)新方法,采用固体酸蒙脱石K-10或4A分子筛为催化剂,将四苄基保护的葡萄糖(2)或α-三氯乙酰亚胺酯糖给体(3)与氢醌直接进行糖基化反应,最高以86%的产率获得4-羟基苯基12',3',4',6'-四-O-苄基-1'-O-D-吡喃葡萄糖苷(4),进而脱除苄基保护,定量获得熊果苷及其端基异构体(1).中间体(4)的结构经IR、MS、1H NMR及元素分析等测试技术进行了确认,化合物(1)的理化数据与文献值相同.     

Extraction and characterization of adenovirus

A new methodology for the extraction and characterization of proteins from Coomassie-stained sodium dodecylsulfate polyacrylamide gel electrophoresis using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been described. The utility of this methodology was demonstrated in the characterization of adenovirus proteins. The key steps in the extraction and destaining process involve washing the excised band with a combination of solvents that include 10% acetic acid, acetonitrile, methanol, and formic acid:water:isopropanol mixture. By using this procedure, we determined adenovirus proteins with molecular weights ranging from 10,000 to 110,000 Da by MALDI-MS, obtaining a detection limit of approximately 6 pmol. Parallel experiments were successfully carried out to analyze adenovirus proteins from Cu-stained gels. It was observed that increase in laser intensity resulted in significant improvements in the quality of MALDI mass spectra for the analysis of inefficiently destained proteins from Cu-stained gels.     

碳化硼纳米线的制备和结构

以碳纳米管为模板，通过加热碳纳米管与硼粉的混合物，获得了笔直的硼碳纳米线.对纳米线的结构和成分进行研究，结果表明纳米线主要为B4C纳米线.在部分B4C纳米线的端部存在Ni颗粒，这些端部具有Ni颗粒的纳米线构成了纳米磁针.讨论了B4C纳米线的生长机制，B4C纳米线的生长主要为硼原子在碳纳米管中扩散并发生化学反应，使得碳纳米管晶格结构发生重组，形成B4C纳米线.反应后，硼原子部分取代了碳纳米管中碳原子，修补了碳纳米管中的晶格缺陷，获得了形态笔直的B4C纳米线.     

碳化硅和碳化硼在电催化中的应用

燃料电池是具有广泛应用前景的新能源技术。碳载铂基催化剂（Pt/C）是最常用的燃料电池电极催化剂,不过Pt/C稳定性较差、且成本高昂,严重限制了燃料电池的规模化应用。共价型碳化物碳化硅和碳化硼,由于具有极强的共价键,其物化稳定性优异,成为制备高稳定性、低成本的燃料电池催化剂的重要基础材料。本文总结了相关研究成果,介绍了碳化硅和碳化硼的独特优势,讨论了相关研究的发展方向。     

菜籽油热氧化过程中荧光光谱特征的变化研究

为探讨菜籽油热氧化过程中荧光光谱特征的变化规律,采用平行因子分析方法结合二维相关技术解析菜籽油的三维同步荧光光谱,并与油脂氧化化学指标进行相关分析。结果表明:菜籽油具有叶绿素a的荧光特征(Δλ=10 nm,λex=674 nm)和叶绿素b的荧光特征(Δλ=60 nm,λex=620 nm);热氧化过程中,产生了(Δλ=60 nm,λex=448 nm)的特征同步荧光峰。双因子的平行因子分析表明:Δλ为10和60 nm的同步荧光光谱分别为第一、第二主要成分,分别对应叶绿素a和油脂氧化产物的荧光特征;随着热氧化时间的延长,叶绿素a的同步荧光强度降低,而油脂氧化产物的同步荧光强度逐渐升高。二维相关分析表明,叶绿素a热氧化速度、叶绿素b热氧化速度、油脂氧化产物生成速度依次降低。代表叶绿素氧化程度的SFI674和代表油脂氧化产物产量的SFI448与油脂氧化化学指标具有良好的相关性。因此,同步荧光光谱可作为衡量食用油热氧化劣变的指标。     

Insight into the Excellent Tribological Performance of Highly Oriented Poly(phenylene sulfide)

Achieving low friction and wear of poly(phenylene sulfide)(PPS) without using fillers or blending is a challenging task, but one of considerable practical importance. Here we describe how neat PPS with high tribological performance is achieved by manipulating processing parameters(pressure, flow and temperature). The key to achieving high tribological performance is comparatively high molecular chain orientation, realized in neat PPS, at high shear rates and low pressure. The friction coefficient and wear rate are as low as ~0.3 and~10^-6 mm³·N^-1·m^-1, respectively, which break the record for neat PPS. These values are even better than those for PPS-based blends and comparable to PPS composites. Further studies show, for the first time, that wear rate decreases exponentially with increasing molecular chain orientation, prompting us to revise the classical Archard's law by including the effect of molecular chain orientation. These findings open the possibility of using neat PPS in highly demanding tribological applications.     

ZnO掺杂的SnO_2纳米纤维的制备、表征及气敏机理(英文)

以二水氯化亚锡(SnCl2·2H2O)为盐原料,采用静电纺丝的方法制备了SnO2纳米纤维.为了研究ZnO掺杂对SnO2形貌、结构及化学成分的影响,分别制备了不同含量ZnO掺杂的SnO2/ZnO复合材料.利用热重-差热分析(TG-DTA)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱仪、扫描电镜(SEM)及能量色散X射线(EDX)光谱对材料的结晶学特性及微结构进行了表征.制备的SnO2/ZnO复合材料是由纳米量级的小颗粒构成的分级结构材料.ZnO含量不同,对应的SnO2/ZnO复合材料结构不同.表征结果表明ZnO的掺杂量对SnO2材料的形貌及结构均起着重要作用.将制备的不同ZnO含量的SnO2/ZnO复合材料进行气敏测试,测试结果表明,Sn:Zn摩尔比为1:1制作的气敏元件对甲醇的灵敏度优于其它摩尔比的气敏元件.讨论了SnO2/ZnO复合材料气敏元件的敏感机理.同时针对Sn:Zn摩尔比为1:1时表现出最好的气敏响应,分析了其原因,包括Zn的替位式掺杂行为、ZnO的催化作用、过量ZnO对SnO2生长的抑制作用以及SnO2与ZnO晶粒界面处的异质结.     

First-Principles Prediction of High-Pressure Phase of CaC6

The lattice dynamics of rhombohedral GaG6 is studied as a function orpressure to probe Its high pressure phase with low superconducting transition temperature using the density functional liner-response theory. The pressureinduced phase transition in CaC6 is attributable to the softening transverse acoustic （TA） phonon mode at the zone boundary X （0.5, 0.0, 0.5） point. The high pressure phase is then explored by performing fully structural optimization in the supercell which accommodates the atomic displacements corresponding to the eigenvectors of the unstable mode of TA（X）. The high-pressure phase is predicted to be a monoclinic unit cell with space group P21/m.     

超亲水-超疏水组合壁面冷凝性能研究

本文通过水热法,结合气相沉积法和掩膜紫外光刻法,在玻璃基底上成功地制备了一种具有多尺度结构的超亲水-超疏水组合壁面,并对制备的具有不同润湿差异的组合壁面的冷凝效率进行了测试。结果表明壁面的冷凝效率取决于亲疏水区域的宽度和润湿性差异,其中当亲水区域宽度为0.80 mm,接触角约为0°,疏水区域宽度为0.95 mm,接触角为158°时,其冷凝效率相比光滑铜片的冷凝效率可以提高39%。进一步分析表明,液滴在极端润湿模式的组合表面的润湿分界线处具有较高的体积传输速率,且在超亲水区形成的连续微流通道加快了冷凝液滴快速排放,提高了整体表面的自更新能力。本文的研究,将为复杂润湿界面滴状冷凝的优化提供方向。