Fabricating blazing grating on NGD by photochemical etching

This paper tries to introduce the reader to the method of using photochemical re-action to copy holographic optical elements(HOEs)in relief.The holographic blazing gratingso copied is groove depth adjustable phase modulability enlarged through copying and 3.3times the diffraction efficiency(DE)of the original grating.It is expected that the newmethod will lead to the mass production of the light-weight HOEs at low cost.     

Polymer-Nanoparticle Composites Composed of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Coated Silver Nanoparticles

The effects of addition of synthesized organic-suspension silver nanoparticles on the crystallization and thermal stability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were studied by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (XRD), UV-Vis absorption spectroscopy, polarized optical microscopy (POM), and thermal gravimetric analysis (TGA). The TEM images showed the average primary size of the as-synthesized silver nanoparticles, coated with a monolayer of the surfactants consisting of oleic acid and an alkylamine, was about 5 nm with narrow distribution, and that they were uniformly dispersed in n-heptane. PHBV/silver nanocomposites were prepared by melt mixing in an internal mixer and then injection molded into rectangle-shaped specimens by a labscale injection molding device. The coated silver nanoparticles showed a homogenuous dispersion in the PHBV matrix when the content of coated silver nanoparticles was about 1%. Both the DSC and POM data showed the efficient heterogeneous nucleation by the coated silver nanoparticles for facilitating PHBV crystallization. The thermal stability of the PHBV/silver nanocomposites improved with the increase in the content of the coated silver nanoparticles.     

关于广义三项指数和的四次幂均值

The main purpose of this paper is using estimates for trigonometric sums and properties of congruence to study the computation of one kind of fourth power mean of a generalized three-term exponential sum, and give an interesting identity for it.     

DNA aggregation and cleavage in CGE induced by high electric field in aqueous solution accompanying electrokinetic sample injection

The phenomenon of peak area decrease due to high injection voltage (V_inj, e.g. 10–30 kV, 200–600 V/cm in the 50 cm capillary) was found in the analysis of very dilute DNA fragments (<0.2 mg/L) by using high‐sensitive electrokinetic supercharging‐CGE. The possibility of DNA cleavage in aqueous solution was suggested, in addition to the aggregation phenomenon that is already known. The analysis of intentionally voltage‐affected fragments (at 200 V/cm) also showed decreased peak areas depending on the time of the voltage being applied. Computer simulation suggested that a high electric field (a few kV/cm or more) could be generated partly between the electrode and the capillary end during electrokinetic injection (EKI) process. After thorough experimental verification, it was found that the factors affecting the damage during EKI were the magnitude of electric field, the distance between tips of electrode and capillary (D_e/c), sample concentration and traveling time during EKI in sample vials. Furthermore, these factors are correlating with each other. A low conductivity of diluted sample would cause a high electric field (over a few hundred volts per centimeter), while the longer D_e/c results in a longer traveling time during EKI, which may cause a larger degree of damage (aggregation and cleavage) on the DNA fragments. As an important practical implication of this study, when the dilute DNA fragments (sub mg/L) are to be analyzed by CGE using EKI, injection voltage should be kept as low as possible.     

Cooling crystallization of aluminum sulfate in pure water modulated by sodium dodecylbenzenesulfonate

This study investigated the cooling crystallization of aluminum sulfate to explore the basic data for the recovery of aluminum resources from coal spoil. Cooling crystallization process of aluminum sulfate with sodium dodecylbenzenesulfonate (SDBS) was investigated experimentally. The effects of operating conditions, namely rotate speed and cooling rate on the crystal size (Median diameter, D_0.5) were studied. Based on single factor experimental results, the response surface method (RSM) with a Box–Behnken design (BBD) was used to determine the key operating conditions, from which a predictive equation was established to quantitatively describe the relationships of D_0.5 and there relative parameters. The optimum operating conditions for cooling crystallization of aluminum sulfate were as follows: rotate speed of 200–300 rpm, cooling rate of 4–5 °C /min and n (SDBS)/n (Al₂(SO₄)₃) of around 5E‐4. Molecular dynamics (MD) results reveal that SDBS decreases the diffusion coefficient (D) of Al³⁺ molecules, which inhibits nucleation and promotes crystal growth.     

Eigenstates and eigenenergies of four-wave-mixing models

We present explicit analytical expressions of all the eigenenergies and eigenstates for two different kinds of four-wave-mixing model in terms of a parameter lambda without the so-called Bethe ansatz assumption. The parameter lambda is shown to be determined by the roots of a simple polynomial. We also obtain the exact explicit analytical expressions of infinite eigenstates and energies without any unknown parameter.     

56,54Fe(n, α)53,51Cr, 56,54Fe(n,p)56,54Mn反应截面计算及普适性模型参数优化研究

基于中子与Fe发生反应产生“氢泡”,及“氦泡”对新型核能利用系统壁材料的影响,开展了中子诱发56,54Fe(n, α)53,51Cr, 56,54Fe(n, p)56,54Mn反应截面计算研究工作。本工作根据现有的56,54Fe(n, α)53,51Cr, 56,54Fe(n, p)56,54Mn反应实验数据、评价数据,对TALYS程序调用的物理模型(包括能级密度、对修正、核温度、光学势参数等)进行参数调校,得到了一组普适性强的模型参数。基于调校的参数,本工作采用核反应程序TALYS理论计算56,54Fe(n, α)53,51Cr, 56,54Fe(n, p)56,54Mn反应的截面、能量微分截面以及双微分截面,全部数据都能与实验数据、评价数据符合较好,且适用于较宽的中子能量区间0~175 MeV。本工作提出了56,54Fe(n, α)53,51Cr, 56,54Fe(n, p)56,54Mn反应的普适性模型参数,促进了核反应理论的发展,为核数据的评价奠定了基础。     

Optical transmission gratings by one driven three-level atom and a microtoroidal resonator

Based on the strong coherent interaction between a three-level ladder-type atom and a fiber-taper-coupled microtoroidal resonator, we present a scheme for optical transmission gratings. Using experimentally accessible parameters, it is shown that alternating regions of high transmission and absorption can be created in the fiber-taper channel by spatially modulating an external coupling field. The model shows an obvious effect which has a direct analogy with the phenomenon of electromagnetically induced grating (EIG) in quantum systems.