Superheating in linear polymers studied by ultrafast nanocalorimetry

To study phase transition kinetics on submillisecond time scale a sensitive ultrafast nanocalorimeter was constructed. Controlled ultrafast cooling, as well as heating, up to 10⁶K/s was attained. The method was applied for the measurements of the superheating phenomenon in a set of linear polymers: iPS, PBT, PET, and iPP. A power law relation between the superheating and the heating rate holds in the heating rate range 10^-2-10⁴K/s. A limiting superheating of about 10% of the melting temperature was observed at rates above 10⁴-10⁵K/s. This limit depends on annealing conditions before sample melting. The observed superheating limit, as well as the power law, can be accounted for the internal stresses near the crystalline amorphous interface in semicrystalline polymers induced by heating, which are related to the thermal expansion gradients inherent in a semicrystalline material.     

Polar Red‐Emitting Rhodamine Dyes with Reactive Groups: Synthesis,Photophysical Properties,and Two‐Color STED Nanoscopy Applications

The synthesis, reactivity, and photophysical properties of new rhodamines with intense red fluorescence, two polar residues (hydroxyls, primary phosphates, or sulfonic acid groups), and improved hydrolytic stability of the amino‐reactive sites (NHS esters or mixed N‐succinimidyl carbonates) are reported. All fluorophores contain an N‐alkyl‐1,2‐dihydro‐2,2,4‐trimethylquinoline fragment, and most of them bear a fully substituted tetrafluoro phenyl ring with a secondary carboxamide group. The absorption and emission maxima in water are in the range of 635–639 and 655–659 nm, respectively. A vastly simplified approach to red‐emitting rhodamines with two phosphate groups that are compatible with diverse functional linkers was developed. As an example, a phosphorylated dye with an azide residue was prepared and was used in a click reaction with a strained alkyne bearing an N‐hydroxysuccinimid (NHS) ester group. This method bypasses the undesired activation of phosphate groups, and gives an amphiphilic amino‐reactive dye, the solubility and distribution of which between aqueous and organic phases can be controlled by varying the pH. The presence of two hydroxyl groups and a phenyl ring with two carboxyl residues in the dyes with another substitution pattern is sufficient for providing the hydrophilic properties. Selective formation of a mono‐N‐hydroxysuccinimidyl ester from 5‐carboxy isomer of this rhodamine is reported. The fluorescence quantum yields varied from 58 to 92 % for free fluorophores, and amounted to 18–64 % for antibody conjugates in aqueous buffers. The brightness and photostability of these fluorophores facilitated two‐color stimulated emission depletion (STED) fluorescence nanoscopy of biological samples with high contrast and minimal background. Selecting a pair of fluorophores with absorption/emission bands at 579/609 and 635/655 nm enabled two‐color channels with low cross‐talk and negligible background at approximately 40 nm resolution.     

One‐Step Ring Opening Metathesis Block‐Like Copolymers and their Compositional Analysis by a Novel Retardation Technique

Using a one‐step synthetic route for block copolymers avoids the repeated addition of monomers to the polymerization mixture, which can easily lead to contamination and, therefore, to the unwanted termination of chain growth. For this purpose, monomers ( M1 – M5 ) with different steric hindrances and different propagation rates are explored. Copolymerization of M1 (propagating rapidly) with M2 (propagating slowly), M1 with M3 (propagating extremely slowly) and M4 (propagating rapidly) with M5 (propagating slowly) yielded diblock‐like copolymers using Grubbs’ first ( G1 ) or third generation catalyst ( G3 ). The monomer consumption was followed by ¹H NMR spectroscopy, which revealed vastly different reactivity ratios for M1 and M2 . In the case of M1 and M3 , we observed the highest difference in reactivity ratios (r₁=324 and r₂=0.003) ever reported for a copolymerization method. A triblock‐like copolymer was also synthesized using G3 by first allowing the consumption of the mixture of M1 and M2 and then adding M1 again. In addition, in order to measure the fast reaction rates of the G3 catalyst with M1 , we report a novel retardation technique based on an unusual reversible G3 Fischer‐carbene to G3 benzylidene/alkylidene transformation.     

X-ray determination of the mean amplitudes of vibration and debye temperatures of some rare earth monochalcogenides

The x-ray diffraction intensities of Bragg reflections have been measured at room temperature for thulium selenide, samarium sulphide, samarium selenide and samarium telluride. On the basis of a common amplitude approximation, the Debye-Waller factor, the mean amplitude of vibration and the Debye temperature have been evaluated. The values of the Debye temperatures and mean amplitudes of vibration are 176±16°K, 0·185 ± 0·017 Å (TmSe), 155 ± 7°K, 0·244 ± 0·012 Å (SmS), 153 ± 14°K, 0·221 ± 0·020 Å (SmSe) and 151 ± 20°K, 0·204 ± 0·027 Å (SmTe).     

Universal pion freeze-out in heavy-ion collisions

Based on an evaluation of data on pion interferometry and on particle yields at midrapidity, we propose a universal condition for thermal freeze-out of pions in heavy-ion collisions. We show that freeze-out occurs when the mean free path of pions lambda(f) reaches a value of about 1 fm, which is much smaller than the spatial extent of the system at freeze-out. This critical mean free path is independent of the centrality of the collision and beam energy from the Alternating Gradient Synchrotron to the Relativistic Heavy Ion Collider.     

Search for direct photons from S-Au collisions at 200 GeV/nucleon

The CERES experiment has measured inclusive photon production in S-Au collisions of 200 GeV/nucleon at the CERN SPS. No evidence for direct emission of photons was found. For the kinematic region 2.1<y<2.65 and 0.4 GeV/c<p??<2.0 GeV/c the yield andp??-dependence of the observed photons are well reproduced by hadron decays. Furthermore, their production rate is found to be proportional to the charged particle density. The systematic errors comparing the measured and expected photon yield result in an upper limit of 14% for the emission of direct photons in central S-Au collisions. For a photon source with a yield depending quadratically on the charged particle density the limit can be reduced to 7%.     

Cadmium

Ohne Zusammenfassung     

Acid‐Labile Amphiphilic PEO‐b‐PPO‐b‐PEO Copolymers: Degradable Poloxamer Analogs

Poly ((ethylene oxide)‐b‐(propylene oxide)‐b‐(ethylene oxide)) triblock copolymers commonly known as poloxamers or Pluronics constitute an important class of nonionic, biocompatible surfactants. Here, a method is reported to incorporate two acid‐labile acetal moieties in the backbone of poloxamers to generate acid‐cleavable nonionic surfactants. Poly(propylene oxide) is functionalized by means of an acetate‐protected vinyl ether to introduce acetal units. Three cleavable PEO‐PPO‐PEO triblock copolymers (M_n,total = 6600, 8000, 9150 g·mol⁻¹; M_n,PEO = 2200, 3600, 4750 g·mol⁻¹) have been synthesized using anionic ring‐opening polymerization. The amphiphilic copolymers exhibit narrow molecular weight distributions (Ð = 1.06–1.08). Surface tension measurements reveal surface‐active behavior in aqueous solution comparable to established noncleavable poloxamers. Complete hydrolysis of the labile junctions after acidic treatment is verified by size exclusion chromatography. The block copolymers have been employed as surfactants in a miniemulsion polymerization to generate polystyrene (PS) nanoparticles with mean diameters of ≈200 nm and narrow size distribution, as determined by dynamic light scattering and scanning electron microscopy. Acid‐triggered precipitation facilitates removal of surfactant fragments from the nanoparticles, which simplifies purification and enables nanoparticle precipitation “on demand.”

     

Water‐Soluble Metallocene‐Containing Polymers

Metallocenes are organometallic compounds with reversible redox profiles and tunable oxidation and reduction potentials, depending on the metal and substituents at the cyclopentadienyl rings. Metallocenes have been introduced in macromolecules to combine the redox‐activity with polymer properties. There are many examples of such hydrophobic polymer materials, but much fewer water‐soluble examples are found scattered across the polymer literature. However, in terms of drug delivery and other biological applications, water solubility is essential. For this very reason, all the synthetic routes to water‐soluble metallocene containing polymers are collected and discussed here. The focus is on neutral ferrocene‐ and ruthenocene‐containing and charged cobaltocenium‐containing macromolecules (i.e., symmetrical sandwich complexes). The synthetic protocols, self‐assembly behavior, and other benefits of the obtained materials are discussed.