Stability of atomic oxygen chemisorption on Pt‐alloy surfaces

A density functional theory calculation is used to investigate the atomic oxygen (O) stability over platinum (Pt) and Pt‐based alloy surfaces. Here, the stability is connected with the preferential adsorption sites for O chemisorptions and the adsorption energy. Thus, the interaction mechanism between atomic O and metal surfaces is studied by using charge transfer analysis. In this present paper, atomic structure and binding energy of oxygen adsorption on the Pt(111) are in a very good agreement with experiment and previous density functional theory calculations. Furthermore, we obtained that the addition of ruthenium (Ru) and molybdenum (Mo) on the pure Pt surface enhances the adsorption energy. Our charge transfer analysis shows that the largest charge transfer contributing to the metal‐O bonding formation is observed in the case of O/PtRuMo surface followed by O/PtRu surface. This is in consistency with metal d‐orbital characteristic, where Mo has much more empty d‐orbital than Ru in correspondence to accept electrons from atomic oxygen. Copyright © 2016 John Wiley & Sons, Ltd.     

Cisplatin-modified isonicotinic acid as a potential linker in bio-MOFs: synthesis and characterization

Research on Chemical Intermediates - The platinum derivative cisplatin is widely used against many types of cancers effectively. However, cisplatin has limitations such as toxicity, resistances,...     

Signal Penetration into Thick Clouds Studied by Multi-Layer Data Observed with a Micro-Pulse Lidar

Lidar return signals are studied for a micro-pulse lidar under sky conditions with multi-layer clouds. From theoretical considerations on the lidar signal-to-noise ratio, it is estimated that the maximum cloud optical thickness detectable is about 3.7. This result reasonably agrees with the actual multi-layer cloud data obtained from observations in Sukhothai, Thailand. Deviations from theoretical prediction, however, are found for a geometrically thin but dense cloud, and for a moderately concentrated but geometrically thick cloud. The effect of multiple scattering is also discussed.     

Film analysis employing subtarget effect using 355 nm Nd-YAG laser-induced plasma at low pressure

The applicability of spectrochemical analysis for liquid and powder samples of minute amount in the form of thin film was investigated using ultraviolet Nd-YAG laser (355 nm) and low-pressure ambient air. A variety of organic samples such as commercial black ink usually used for stamp pad, ginseng extract, human blood, liquid milk and ginseng powder was prepared as film deposited on the surface of an appropriate hard substrate such as copper plate or glass slide. It was demonstrated that in all cases studied, good quality spectra were obtained with very low background and free from undesirable contamination by the substrate elements, featuring ppm or even sub-ppm sensitivity and worthy of application for quantitative analysis of organic samples. The proper preparation of the films was found to be crucial in achieving the high quality spectra. It was further shown that much inferior results were obtained when the atmospheric-pressure (101 kPa) operating condition of laser-induced breakdown spectroscopy or the fundamental wavelength of the Nd-YAG laser was employed due to the excessive or improper laser ablation process.     

Effect of Multiple Scattering in the Lidar Measurement of Tropospheric Aerosol Extinction Profiles

This paper describes the lidar inversion of the tropospheric aerosol extinction profiles under the influence of multiple-scattering effects for various elevation angles of lidar detection. A single-scattering lidar equation is employed to analyze lidar signals with multiple-scattering contributions that are calculated by the Monte Carlo method for given atmospheric conditions. We calculate errors in the optical thickness from the results with and without multiple-scattering effects. It is found that the errors vary in a range of 2#x2013;18#x0025; according to the optical thickness variation of 0.19#x2013;3.8. The dependence of the error on the field-of-view angle of the lidar observation is also discussed.     

Preparation and characterization of activated carbon from bagasse fly ash

Activated carbons from bagasse fly ash (BFA) were prepared by one step chemical activation using ZnCl₂ as activating agent, or combination method of chemical with CO₂ physical activation (physicochemical activation). The development of porosity was studied in correlation with the method of activation, activation temperature, and also the chemical weight ratio. A typical sample by the combination method at 600 °C and weight ratio of ZnCl₂:BFA = 2 exhibited micropore volume of 0.528 cc/g, mesopore volume of 0.106 cc/g and surface area of 1200 m²/g. For determining the adsorption capacity of the carbon samples in solutions, phenol and methylene blue equilibrium adsorption experiments were conducted. The properties and adsorption capacity of the synthesized activated carbons has been compared to commercial activated carbon (Norit^® SX Plus).     

GC-MS,LC-MS/MS,Docking and Molecular Dynamics Approaches to Identify Potential SARS-CoV-2 3-Chymotrypsin-Like Protease Inhibitors from Zingiber officinale Roscoe

This study aims to identify and isolate the secondary metabolites of Zingiber officinale using GC-MS, preparative TLC, and LC-MS/MS methods, to evaluate the inhibitory potency on SARS-CoV-2 3 chymotrypsin-like protease enzyme, as well as to study the molecular interaction and stability by using docking and molecular dynamics simulations. GC-MS analysis suggested for the isolation of terpenoids compounds as major compounds on methanol extract of pseudostems and rhizomes. Isolation and LC-MS/MS analysis identified 5-hydro-7, 8, 2′-trimethoxyflavanone (9), (E)-hexadecyl-ferulate (1), isocyperol (2), N-isobutyl-(2E,4E)-octadecadienamide (3), and nootkatone (4) from the rhizome extract, as well as from the leaves extract with the absence of 9. Three known steroid compounds, i.e., spinasterone (7), spinasterol (8), and 24-methylcholesta-7-en-3β-on (6), were further identified from the pseudostem extract. Molecular docking showed that steroids compounds 7, 8, and 6 have lower predictive binding energies (MMGBSA) than other metabolites with binding energy of −87.91, −78.11, and −68.80 kcal/mole, respectively. Further characterization on the single isolated compound by NMR showed that 6 was identified and possessed 75% inhibitory activity on SARS-CoV-2 3CL protease enzyme that was slightly different with the positive control GC376 (77%). MD simulations showed the complex stability with compound 6 during 100 ns simulation time.     

Microreactor for the Catalytic Partial Oxidation of Methane

Fixed-bed reactors for the partial oxidation of methane to produce synthetic gas still pose hot-spot problems. An alternative reactor, which is known as the shell-and-tube-typed microreactor, has been developed to resolve these problems. The microreactor consists of a 1 cm outside-diameter, 0.8 cm inside-diameter and 11 cm length tube, and a 1.8 cm inside-diameter shell. The tube is made of dense alumina and the shell is made of quartz. Two different methods dip and spray coating were performed to line the tube side with the LaNixOy catalyst. Combustion and reforming reactions take place simultaneously in this reactor. Methane is oxidized in the tube side to produce flue gases (CO2 and H2O) which flow counter-currently and react with the remaining methane in the shell side to yield synthesis gas. The methane conversion using the higher-loading catalyst spray-coated tube reaches 97% at 700℃, whereas that using the lower-loading catalyst dip-coated tube reaches only 7.78% because of poor adhesion between the catalyst film and the alumina support. The turnover frequencies (TOFs) using the catalyst spray-and dip-coated tubes are 5.75×10-5 and 2.24×10-5 mol/gcat·s, respectively. The catalyst spray-coated at 900℃provides better performance than that at 1250℃because sintering reduces the surface-area. The hydrogen to carbon monoxide ratio produced by the spray-coated catalyst is greater than the stoichiometric ratio, which is caused by carbon deposition through methane cracking or the Boudouard reaction.     

Review of Acetic Acid Synthesis from Various Feedstocks Through Different Catalytic Processes

Acetic acid (AA) has been largely used with a wide range of applications such as a raw material for a synthesis of vinyl acetate monomer, cellulose acetate or acetate anhydrate, acetate ester and a solvent for a synthesis of terephthalic acid and so on. The present paper briefly summarizes the commercialized chemical processes with their Rh or Ir-based catalytic systems in a liquid-phase carbonylation reaction such as Monsanto, Cativa and Acetica processes. In addition, some alternative catalytic systems such as heterogeneous catalysts to produce AA by direct oxidation or indirect carbonylation of dimethyl ether through BP-SaaBre process in a gas-phase reaction to solve some problems such as a difficult separation of homogeneous catalysts in a corrosive reaction medium. Some home-made heterogeneous catalysts such as a rhodium incorporated graphitic carbon nitride (Rh-g-C₃N₄) and some heterogenized homogeneous catalysts using the supports of tungsten carbide, iron oxide or graphitic carbon nitride containing rhodium complexes were also introduced for the synthesis of AA through a liquid-phase methanol carbonylation reaction to effectively solve the leaching problem of active rhodium metal as well as to mitigate the separation problem of homogeneous catalysts.     

Identification of a new naphthalene and its derivatives from the bulb of eleutherine americana with inhibitory activity on lipopolysaccharide-induced nitric oxide production

A new naphthoquinone, (-)-3-[2-(acetyloxy)propyl]-2-hydroxy-8-methoxy-1,4-naphthoquinone (1) was isolated from the bulb of Eleutherine americana MERR. et HEYNE (Iridaceae) together with two known compounds, eleutherinol (6) and 1,5-dihydroxy-3-methylanthraquinone (7) which were found in this species for the first time. The other known compounds, (-)-isoeleutherin (2), (+)-eleutherin (3), (-)-hongconin (4), and (+)-dihydroeleutherinol (5) which were reported previously from this species, were also isolated in the present study. Compounds 2-6 exhibited potent inhibitory activity on nitric oxide production in RAW 264.7 lipopolysaccharide-activated mouse macrophage cells with IC(50) values of 7.7, 11.4, 19.8, 21.7, and 34.4 microM, respectively, whereas the other two compounds, 1 and 7, were inactive. The structure of compound 1 was elucidated by spectroscopic data analysis including 1D and 2D NMR experiments.