Adhesive-free bonding of Zerodur glass to silicon

This work demonstrates anodic bonding of Zerodur glass having very low co-efficient of thermal expansion (CTE) to Si, Zerodur glass to thermally grown silicon dioxide on silicon and Pyrex glass to Ge. Bonding results, using point cathode contact and plate cathode contact configurations, are discussed. Bonding parameters, i.e. applied dc voltage, temperature and bonding time were determined. Heating and cooling rates for crack-free bonding of Zerodur glass were also determined.     

Adaptation of the human skin by chronic solar-simulating UV irradiation prevents ultraviolet-B irradiation-induced rise in serum C-reactive protein levels

Exposure of the skin to UV radiation induces local inflammation. We hypothesized that inflammation induced by erythemal UV-B irradiation could elevate levels of serum C-reactive protein (CRP) and that suberythemal repeating doses of solar-simulating UV radiation (SSR) would produce photoadaptation to such inflammation. Separation-free high-sensitivity assays of CRP show an increase by 42% (P = 0.046) in CRP concentrations in healthy human subjects 24 h after a 3 minimal erythemal dose (MED) dose of UV-B delivered onto a 100 cm2 skin area. Preceding daily suberythemal doses of whole-body SSR for 10 or 30 consecutive days completely prevented the CRP increase. UV-B-induced skin erythema was partially attenuated by 30 preceding days of SSR only (P = 0.00066). After 10 daily SSR doses, the mean baseline CRP concentrations (0.24 +/- 0.21 mg/L) declined by 35% (P = 0.018). Using high-sensitivity analysis of serum CRP as the endpoint marker for cutaneous inflammation, we show that acute exposure of even a relatively small skin area to erythemal UV-B induces skin inflammation detectable also at the systemic level and that photoadaptation by preceding repeating suberythemal doses of SSR reduces signs of inflammation. Our data complement the view given by previous studies in that local photoadaptation also has systemic manifestations.     

EPR Studies of Tl0.5Pb0.5Sr1.6Ba0.4CaCu2?xRuxO7?δ Superconductor

Bulk superconducting samples of type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ, (Tl, Pb)/Sr-1212, with 0.0 ≤ x ≤ 0.525 were prepared by the conventional one-step solid-state reaction technique. The prepared samples were investigated using X-ray powder diffraction, electrical resistivity and electron paramagnetic resonance (EPR) measurements. Enhancement of the phase formation, superconducting transition temperature T _c and hole carriers concentration P was observed up to x = 0.075. For x > 0.075, a reverse trend was observed. EPR spectra were measured at different temperatures (120–290 K) for all prepared samples. The number of spins N participating in the resonance and the paramagnetic susceptibility χ were calculated as a function of both Ru-content and temperature. N and χ increased as the Ru-content increased. A linear relationship between logN and 1/T was established, from which the activation energy E _a was calculated as a function of the Ru-content. The temperature dependence of χ was fitted according to Curie–Weiss type of magnetic behavior. Curie constant C, Curie temperature θ, the effective magnetic moment μ and the electronic specific heat γ were estimated as a function of the Ru-content.     

Effect of IR laser radiation on the structure and optical properties of PC-PBT/Pd polymer nanocomposite films

ABSTRACT

Bayfol (PC-PBT blend ?lm) is a class of polymeric solid-state nuclear track detector which has a lot of applications in several radiation detection ?elds. It is a bisphenol-A polycarbonate PC blended with polybutylene terephthalate PBT. Bayfol/Palladium (PC-PBT/Pd) nanocomposite films have been deposited using the molding technique. It is worth mentioning that this report is almost the first one dealing with the topic of the changes of physical properties of Bayfol/Pd nanocomposite due to laser exposure. Samples from PC-PBT/Pd (5?wt%) nanocomposite were exposed to IR-pulsed laser of 5-W power, capable of producing 2000 pulses per second with pulse duration of 200?ns at 904?nm. The laser fluences were in the range 2–25?J/cm². The resultant modi?cations in the exposed nanocomposite samples have been studied as a function of fluence using different characterization techniques such as X-ray diffraction (XRD), UV spectroscopy and color difference studies. The results indicate the proper dispersion of Pd nanoparticles in the PC-PBT matrix that causes a strong intermolecular interaction between Pd and PC-PBT, resulted in an increase in refractive index and the amorphous phase. Also, it is found that the laser exposure reduces the optical energy gap that could be attributed to the increase in structural disorder of the exposed PC-PBT/Pd nanocomposites due to crosslinking. Further, the color intensity ΔE, which is the color difference between the exposed samples and the non-exposed one, was increased with increasing the laser fluence, convoyed by a significant increase in the green and yellow color components.     

昆虫信息素研究III: 拟蚜虫警戒素的研究

合成了一系列碳数为十五和十四的倍半萜类蚜虫警戒素,并进行了生物活性测定,从中筛选有效化合物.     

羧甲基纤维素钠水凝胶的制备及其生物降解性研究

用羧甲基纤维素钠(CMC—Na)制得了含水量高达98％的水凝胶，考察了防腐剂、交联剂、无机态氮素、有机态氮素、碳水化合物的加入量以及环境中pH值等因素对生物降解性的影响。结果表明：制备条件不同，水凝胶的生物降解性不同；环境中一定量铵根离子的存在有利于水凝胶的生物降解；在pH=5．2的环境中纤维素酶活性最高，降解程度最大。     

Mass spectral studies on steroidal compounds—V: Rings B and A seco 5-keto compounds in the cholestane series

The mass spectra of several structurally related ring B seco 5-keto compounds (I to VII) have been examined. The mass spectra of I, II, III and IV are conspicuous by an intense peak at m/e112(C₇H₁₂O) and those of V (highest mass peak at [M ? CH₃COOH]), VI and VII by a prominent peak at m/e 100 (C₇H₁₀O), which apparently results from McLafferty rearrangement involving 5-keto function and an appropriate γ-hydrogen at C-8 and C-11. This rearrangement, leading to the aforementioned ions, is of diagnostic value in the characterisation of such compounds. The mass spectrum of VIII exhibits a prominent ion peak at m/e 332 (C₂₃H₄₀O) resulting from McLafferty rearrangement involving the 5-keto function and C2? H. This offers an excellent means of differentiating between the isomeric acids (III and VIII). The fragmentation pathways suggested are supported by accurate mass measurement of the salient fragment ions and in some cases by appropriate metastable peaks.     

Pyridine-thiourea based high performance polymers: Synthesis and characterization

A novel diamine monomer, pyridine-2, 6-bis((4-aminophenyl)thioureido)carbonyl(PATC) was synthesized efficiently and polymerized with various aromatic dianhydrides. Consequently, poly(pyridine thiourea-imide)s(PPTIs) with good thermal properties and flame retardancy were fabricated. The structures of PATC and PPTIs were characterized by FTIR, 1H-NMR, 13C-NMR spectroscopy along with elemental analysis, crystallinity, organosolubility, inherent viscosity and gel permeation chromatographic measurements. PPTIs containing C=S, CONH and meta substituted pyridine moieties in the polymer backbone showed amorphous nature and were readily soluble in highly polar organic solvents and even in less polar solvents such as tetrahydrofuran(THF). Polymers had inherent viscosities in the range of 0.91-1.16 d L/g and molecular weight was found between 68000-77000 g/mol. The electrical properties of the PPTIs were estimated in terms of dielectric constant over a range of frequencies. Their thermal stability was determined by 10% weight loss temperature found in the range of 519-563 °C under inert atmosphere. The glass transition temperature of the polyimides varied between 247 °C and 267 °C. The flame retardant properties of PPTIs were investigated in terms of limiting oxygen index(LOI) which was found in the range of 38.26-39.95. Introduction of thiourea in the polymer backbone is an effective way to improve the thermal stability and flame retardancy. Thus PATC can be considered as an excellent candidate for the synthesis of high performance polymers.