D3h‐Symmetric Porphyrin‐Based Rigid Macrocyclic Ligands for Multicofacial Multinuclear Complexes in a One‐Nanometer‐Sized Cavity

The one‐step synthesis of D_3h‐symmetric cyclic porphyrin trimers 1 composed of three 2,2′‐[4,4′‐bis(methoxycarbonyl)]bipyridyl moieties and three porphyrinatozinc moieties was achieved from a nickel‐mediated reductive coupling of meso‐5,15‐bis(6‐chloro‐4‐methoxycarbonylpyrid‐2‐yl)porphyrinatozinc. Although cyclic trimers 1 were obtained as a mixture that included other cyclic and acyclic porphyrin oligomers, an extremely specific separation was observed only for cyclic trimers 1 when using columns of silica gel modified with pyrenylethyl, cyanopropyl, and other groups. Structural analysis of cyclic trimers 1 was carried out by means of NMR spectroscopy and X‐ray crystallography. Treatment of an η³‐allylpalladium complex with a cyclic trimer gave a tris(palladium) complex containing three η³‐allylpalladium groups inside the space, which indicated that the bipyridyl moieties inside the ring could work as bidentate metalloligands.     

Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3 ⁵⁺, which is connected through a fourfold rotaxane, was prepared. Heterodimer 3 ⁵⁺ catalyzed ethane oxidation in the presence of H₂O₂ at a relatively low temperature. The site-selective complexation of 3 ⁵⁺ with an additional anionic porphyrin (TPPS⁴⁻) through π–π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3 ⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS⁴⁻ to 3 ⁵⁺ enhanced the catalytic activity.     

Mode of complement activation by acidic heteroglycans from the leaves of Artemisia princeps PAMP.

The mode of action of the anti-complementary acidic heteroglycans, AAF-IIb-2 and IIb-3 which consisted of rhamnogalacturonan core and arabinogalactan moieties, purified from the leaves of Artemisia princeps PAMP (Japanese name = Gaiyo) were investigated. The anti-complementary activities of AAF-IIb-2 and IIb-3 were reduced partially in the absence of Ca2+ ions. A marked consumption of C4 was observed to have occurred when serum was incubated with both polysaccharides in the presence of Ca2+ ions. AAF-IIb-2 showed more potent C4 consumption than IIb-3. After the incubation of the serum with AAF-IIb-2 in the absence of Ca2+ ions, a cleavage of C3 in the serum was detected by immunoelectrophoresis. AAF-IIb-2 showed more significant consumption of the complement than IIb-3 when rabbit erythrocytes were used in the assay system in the absence of Ca2+ ions. These results indicate that AAF-IIb-2 activates the complement via both the alternative and classical pathways, whereas IIb-3 mainly activates the complement via the classical pathway. The absorption of serum with Protein A-Sepharose results in a decrease of the activity of AAF-IIb-2 and IIb-3. However, the decrease of the activity was restored by the replacement of the immunoglobulin G (IgG) fraction after its recovery from the Protein A-Sepharose. These results suggest that IgG dependent mechanisms are both involved in the anti-complementary activity of AAF-IIb-2 and IIb-3.     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.     

Studies on glycolipids. III. Glyceroglycolipids from an axenically cultured cyanobacterium, Phormidium tenue.

Seven new monogalactosyl diacylglycerols (1-7) and six new digalactosyl diacylglycerols (11-16) were isolated from an axenically cultured cyanobacterium, P. tenue. Their structures were elucidated on the basis of physicochemical evidence and the results of enzymatic hydrolysis using a lipase (from Rhizopus arrhizus). Comparison of antialgal activity for P. tenue between monogalactosyl diacylglycerols (1-8) and digalactosyl diacylglycerols (11-19) revealed that the former showed more potent activity than the latter.     

Analysis method of the angiotensin-I converting enzyme inhibitory activity based on micellar electrokinetic chromatography.

A micellar electrokinetic chromatography (MEKC) method was developed for estimating the angiotensin-I converting enzyme (ACE) inhibitory activity by separating the hippuric acid liberated in the ACE reaction mixture in the presence of an inhibitor, captopril. The hippuric acid was successfully separated and detected by MEKC with a 25 mM sodium dodecyl sulfate solution in a 25 mM phosphate-50 mM borate buffer at pH 7.0; the total analysis took about 5 min. A good linear relationship was observed between the inhibitor and the peak area of hippuric acid release. No significant difference in the ACE inhibitory activity (IC50) of captopril (an antihypertensive medicine) or autolyzed-mushrooms (functional foods) was observed between the conventional method and the MEKC method. The MEKC method was found to be a useful technique for a rapid assay of the ACE inhibitory activity.     

Preparation of macromonomers by copolymerization of methyl acrylate dimer involving β fragmentation

The unsaturated dimer of methyl acrylate [CH₂C(CO₂CH₃)CH₂CH₂CO₂CH₃, or MAD] was copolymerized with various monomers to prepare copolymers bearing the ω-unsaturated end group [CH₂C(CO₂CH₃)CH₂ ] arising from β fragmentation of the MAD propagating radical. Copolymerizations of MAD with cyclohexyl and n-butyl acrylate resulted in copolymers with ω-unsaturated end groups, and increasing the temperature up to 180 °C resulted in an increase in the rate of β fragmentation of MAD radicals relative to propagation. Only a small amount of unsaturated end groups was introduced by copolymerization with ethyl methacrylate (EMA), and the EMA content in the copolymer increased with temperature. These findings could be explained by the reversible addition of the poly(EMA) radical to MAD. The copolymerization with ethyl α-ethyl acrylate (EEA) did yield a copolymer containing unsaturated end groups with MAD units as part of the main chain, although the steric hindrance of the ethyl group suppressed homopropagation and crosspropagation of EEA, resulting in low polymerization rates. Therefore, the copolymerization of MAD with acrylic esters at high temperatures was noted as a convenient route for obtaining acrylate–MAD copolymers bearing unsaturated end groups at the ω end (macromonomer). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 597–607, 2004     

Characterization of metal binding properties of rhamnogalacturonan II from plant cell walls by size-exclusion HPLC/ICP-MS.

The binding properties of metal ions to a pectic polysaccharide, rhamnogalacturonan II (RG-II), from plant cell walls were analyzed by size-exclusion HPLC/ICP-MS. The dimeric RG-II borate complex (dRG-II-B) from sugar beet and red wine contained 0.8 - 1.1 mol/mol of B, 0.8 - 1.1 mol/mol of Ca, 0.1 - 0.3 mol/mol of Sr, and 0.03 - 0.07 mol/mol of Ba. The treatment of dRG-II-B with Sr2+, Ba2+, Pb2+ or La3+ exchanged the originally present Ca, Sr and Ba. In contrast, monomeric RG-II (mRG-II), which contained approximately 0.1 mol/mol of Ca, formed complexes with La3+, Eu3+, and Lu3+ added to the solution, but did not do so with Ca2+, Sr2+, Ba2+ and Pb2+. The HPLC/ICP-MS and HPLC/RI (refractive index detector) analysis of the partially hydrolyzed mRG-II that was treated with La3+ indicated that the side chains and backbone of mRG-II together form a lanthanoid binding site.