静止轨道星载差分吸收光谱仪CCD成像系统设计

静止轨道卫星差分吸收光谱仪采用摆扫成像方式对大气进行探测,针对其工作时CCD成像系统信噪比大于1 000、高速探测模式下探测周期小于10min、高分辨率模式下探测周期小于1h的要求,进行CCD成像系统设计.选取CCD47-20作为探测器,设计成像电路实现光谱图像信号的采集和上传.分析了帧叠加和像元合并对时间、空间分辨率的影响.结合帧转移CCD的特点设计了每个位置最后一帧读出时摆镜转动的成像方式,并合理设置了帧叠加数和像元合并数,达到优化成像周期的目的.1s曝光时间条件下,该CCD成像系统的高速、高分辨率模式探测周期分别为515s和3 315s,图像信噪比均大于1 000,污染物观测实验中未出现失帧或重复的现象.该CCD成像系统方案满足静止轨道星载差分吸收光谱仪的探测需求,为静止轨道环境监测仪器设计提供参考.     

第一类永动机幻梦的破灭

介绍了13~18世纪物理学史和科技史上曾名噪一时的第一类永动机的设计方案的破灭.第一类永动机幻梦破灭的历史引起了人们的反思与启示,有力地促进了19世纪中叶能量转化和守恒定律的确立.     

Hydrodynamic Properties of Fe3O4 Kerosene-Based Ferrofluids with Narrow Particle Size Distribution

We investigate the hydrodynamic properties of Fe3O4 kerosene-based ferrofluids with narrow particle size distribution. The ferrofluids are synthesized by improving chemical coprecipitation technique. A narrow distribution of 8.6-10.8nm particle sizes is obtained from the magnetization curve with the free-form model based on the Bayesian inference theory. The fitting result is consistent with average particle size obtained from x-ray diffraction. With the increase of applied magnetic field and magnetic particle concentration, apparent viscosity of ferrofluids increases. At concentration 4.04%, the type of flow for the ferrofluid transforms from Newtonian to Bingham plastic fluid as the applied magnetic field increases.     

探讨Abel积分零点的一个定理

本文研究了具有中心环域的可积多项式系统,探讨此系统在用多项式进行微扰的情况下,其所对应的Abel积分的零点个数的计算方法,给出了一个较为实用的定理,并举出了若干个应用的例子．     

低场脉冲核磁共振测定二醋酸纤维素丝束中油剂

研究了采用低场脉冲核磁共振(NMR)测定二醋酸纤维素丝束油剂的新方法，给出NMR法测定二醋酸纤维素丝束油荆含量的标准曲线。同时对NMR法测量二醋酸纤维素丝束油荆不确定度进行了评估。结果表明，NMR法具有分析速度快、无污染、无损伤和准确度高的优点，适合于二醋酸纤维素丝束油荆的分析。     

石英晶体微天平技术研究纳米TiO_2表面Cu(Ⅱ)吸附与光化学还原过程

环境中排放的重金属离子Cu!对水生和陆生生物有强的毒害性。饮用水中Cu!的浓度高于1.0mg·L-1时,将会导致人畜得血色沉着病和胃肠粘膜病[1]。Cu!无法进行生物降解,除去废水中Cu!的常见方法有离子交换、置换、化学沉淀等[2],然而这些方法需要消耗大量的化学试剂,成本高。近来,研     

A hydrogen-bonding receptor that binds cationic monosaccharides with high affinity in methanol

A dicarboxylate host (1) binds cationic monosaccharides such as D-glucosamine HCl (2), D-galactosamine-HCl (3), and D-mannosamine-HCl (4) with high affinity (K1 = 8.0 x 10(4)-2.0 x 10(5) M(-1)) in methanol. In circular dichroism (CD) spectroscopy a positive exciton-coupling band was observed near 290 nm; this indicates that the saccharides are recognized by multiple point interactions. Since the corresponding neutral monosaccharides are not significantly bound, one may conclude that complex formation is primarily due to the electrostatic interaction between NH3+ in the guest and one carboxylate in the host and secondarily due to hydrogen-bonding interactions of OH groups with the other carboxylate and/or nitrogen bases. Molar ratio plots and Job plots indicate that host 1 and cationic monosaccharide guests form CD-active, pseudo-cyclic 1:1 complexes at low guest concentration followed by the formation of CD-silent, acyclic 1:2 1-saccharide complexes at high guest concentration. The possible binding modes are discussed in detail on the basis of molecular mechanics calculations and chemical shift changes in 1H NMR spectra. The results of competition experiments with several cationic reference compounds bearing fewer OH groups than 2-4 are consistent with the proposed binding model. Thus, the present study is a rare example of saccharide recognition in a protic solvent, where in general, hydrogen-bonding interactions are rarely useful because of strong solvation energy. These are apparently the strongest saccharide complexes involving noncovalent interactions between host and guest. We believe that the findings are significant as a milestone toward development of new saccharide recognition systems ultimately useful in aqueous solution.     

The mechanism of photocatalytic hydrogen production from gaseous methanol and water: IR spectroscopic approach

IR spectroscopic and volumetric study under reaction conditions of the mechanism of photocatalytic hydrogen production from gaseous methanol and water revealed that CO₂ and H₂ were produced by reaction between adsorbed CH₃O(ad) and H₂O. Another reaction path for H₂ production, CH₃ OH(ad) → H₂ + HCHO, was suggested which is dominant in the absence of water.     

尿素酶固载于纳米二氧化钛多孔膜上的尿素生物传感器

在钛丝基体上沉积一层纳米二氧化钛(TiO2)多孔膜,然后直接将尿素酶吸附在TiO2膜上。基于TiO2膜的pH响应,发展了一种廉价的、易于微型化的pH敏尿素酶传感器。采用石英微天平、红外光谱和紫外可见光谱等手段研究尿素酶在TiO2膜上的物理固载行为。由于纳米TiO2在紫外光下光自洁特性可获得高度洁净的表面,石英微天平研究表明在光自洁后的TiO2膜上尿素酶的吸附具有很好的重复性和稳定性,吸附量为0.22mmol/g,吸附平衡常数k为3.15×105L/mol。采用电位法测定了尿素酶/TiO2复合膜电极的性能及其影响因素,在1.0 mmol/L pH 7~8 PBS,35℃,尿素的响应范围为8.5×10-5~1.5×10-1mol/L,相关系数r为0.993 7,检出限为6×10-5mol/L。     

烯丙位氧化的几种方法

综述了近年来烯丙位氧化的研究进展，详细讨论了过渡金属及其络合物、硒化 合物在烯丙位氧化中的应用，并简述了丁基锂方法、固相催化方法、生物氧化方法 和次氯酸钠氧化方法在烯丙位氧化中的应用．