Sensitive o-toluidine reagent for glucose assay at moderately elevated temperatures

A reagent is developed for increasing the sensitivity of the direct o-toluidine procedure for glucose so that the reaction may be carried out at temperatures as low as 37 °C.The sensitivity is achieved by eliminating all water from the system, except for a minute percentage introduced with the samples and by using a high boric acid concentration. Under these conditions protein does not precipitate and lipids remain dissolved. At 55 °C, interference from bilirubin at a concentration of 20 mg/100 ml is 3.5%.Blood may be collected with sodium fluoride since it does not interfere in the procedure. The rate of color development is slower for aqueous standards than it is for serum at the lower temperatures. This may be corrected by preparing the standards in a 6% albumin solution.Results obtained by applying the reagent with the continuous flow system of analysis (Technicon), and with the discrete sample analyzers, Beckman DSA, Lars Jungberg Autolab (Sweden), Robot Chemist, and RaBA (Japan) are reported.The reagent is useful as a spray reagent for sugar identification on thin-layer chromatography plates. Heating at different temperatures permits the differentiation between certain sugars with similar R_f values.     

The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

Sol-Gel Processing of Transparent PLZT((Pb,La)(Zr,Ti)O3) Fibers

PLZT((Pb,La)(Zr,Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n-propoxide and titanium isopropoxide containing 2-methoxyethanol as the solvent. The as-drawn gel fibers were pretreated in an autoclave and preheated in flowing H₂O vapor prior to the heat-treatment for crystallization. The effects of autoclaving and preheating in flowing H₂O vapor on the structure and composition of the resultant fibers were investigated. Optically transparent single phase perovskite PLZT fibers of 5–15 m in thickness and 5 cm in length were successfully prepared when the autoclave-treatment and the preheating in flowing H₂O vapor were conducted prior to crystallization. These treatments are thought to promote hydrolysis of the organic groups and polycondensation reaction in the gel fibers, leading to the successful formation of dense, crack-free transparent PLZT fibers.     

Low temperature properties of acetonitrile confined in MCM-41

The effect of confinement on the phase changes and dynamics of acetonitrile in mesoporous MCM-41 was studied by use of adsorption, FT-IR, DSC, and quasi-elastic neutron scattering (QENS) measurements. Acetonitrile molecules in a monolayer interact strongly with surface hydroxyls to be registered and perturb the triple bond in the C[triple bond]N group. Adsorbed molecules above the monolayer through to the central part of the cylindrical pores are capillary condensed molecules (cc-acetonitrile), but they do not show the hysteresis loop in adsorption-desorption isotherms, i.e., second order capillary condensation. FT-IR measurements indicated that the condensed phase is very similar to the bulk liquid. The cc-acetonitrile freezes at temperatures that depend on the pore size of the MCM-41 down to 29.1 A (C14), below which it is not frozen. In addition, phase changes between alpha-type and beta-type acetonitriles were observed below the melting points. Application of the Gibbs-Thomson equation, assuming the unfrozen layer thickness to be 0.7 nm, gave the interface free energy differences between the interfaces, i.e., Deltagamma(l/alpha) = 22.4 mJ m(-2) for the liquid/pore surface (ps) and alpha-type/ps, and Deltagamma(alpha/beta) = 3.17 mJ m(-2) for alpha-type/ps and beta-type/ps, respectively. QENS experiments substantiate the differing behaviors of monolayer acetonitrile and cc-acetonitrile. The monolayer acetonitrile molecules are anchored so as not to translate. The two Lorentzian analysis of QENS spectra for cc-acetonitriles showed translational motion but markedly slowed. However, the activation energy for cc-acetonitrile in MCM-41 (C18) is 7.0 kJ mol(-1) compared to the bulk value of 12.7 kJ mol(-1). The relaxation times for tumbling rotational diffusion of cc-acetonitrile are similar to bulk values.     

Synthesis and structure of 1-zirconacyclopent-3-yne complexes without substituents adjacent to the triple bond

Five-membered metallacyclic alkynes that have no substituents adjacent to the triple bond have been synthesized, isolated, and structurally characterized. Zirconocene dichlorides, Cp'2ZrCl2 (Cp' = C5H5, C5H4-t-Bu), reacted with 1,4-dichlorobut-2-yne in the presence of magnesium to give 1-zirconacyclopent-3-yne compounds (5 (a) Cp' = C5H5, (b) Cp' = C5H4-t-Bu) that have a -CH2CCCH2- moiety in good yields. They are stable enough to be isolated in a pure form, despite the absence of substituents. 5a reacted with an equimolar amount of Cp2Zr(but-1-ene)(PMe3) to produce a bimetallic complex in which the zirconacyclopentyne coordinates to the other zirconocene moiety as an alkyne.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Morphological Investigation of Midblock‐Sulfonated Block Ionomers Prepared from Solvents Differing in Polarity

Recent developments regarding charged multiblock copolymers that can form physical networks and exhibit robust mechanical properties herald new and exciting opportunities for contemporary technologies requiring amphiphilic attributes. Due to the presence of strong interactions, however, control over the phase behavior of such materials remains challenging, especially since their morphologies can be solvent‐templated. In this study, transmission electron microscopy and microtomography are employed to examine the morphological characteristics of midblock‐sulfonated pentablock ionomers prepared from solvents differing in polarity. Resultant images confirm that discrete, spherical ion‐rich microdomains form in films cast from a relatively nonpolar solvent, whereas an apparently mixed morphology with a continuous ion‐rich pathway is generated when the casting solvent is more highly polar. Detailed 3D analysis of the morphological characteristics confirms the coexistence of hexagonally‐packed nonpolar cylinders and lamellae, which facilitates the diffusion of ions and/or other polar species through the nanostructured medium.

     

Aggregation states and surface wettability in films of poly(styrene-block-2-perfluorooctyl ethyl acrylate) diblock copolymers synthesized by atom transfer radical polymerization

Well-defined poly(styrene-block-2-perfluorooctyl ethyl acrylate) [P(St-b-PFA)] copolymers with various chemical compositions were synthesized by atom transfer radical polymerization. Films of P(St-b-PFA) were structurally characterized, from bulk to surface, on the basis of transmittance electron microscopic observation and small-angle X-ray scattering, X-ray photoelectron spectroscopic, and contact angle measurements. For a comparison, poly(styrene-random-2-perfluorooctyl ethyl acrylate) [P(St-ran-PFA)] copolymers were also synthesized by conventional free radical polymerization. While P(St-b-PFA) with the 2-perfluorooctyl ethyl acrylate (PFA) content higher than 18.7 mol % formed a typical phase-separated cylinder structure, P(St-b-PFA) with a lower PFA content and P(St-ran-PFA) were in a miscible state. Since the perfluoroalkyl groups possess extremely low surface energy, they were preferentially segregated at the film surface, resulting in the formation of the PFA surface layer. This was the case for all P(St-b-PFA) films examined, although the aggregation state at the surface was strongly dependent on the PFA content. In the case of the P(St-b-PFA) with the PFA content higher than 18.7 mol %, both advancing and receding contact angles for water were 120 degrees and even larger with almost no hysteresis. In addition, extremely excellent oil-repellent surface properties such as advancing and receding contact angles for dodecane of 76 degrees and 75 degrees were also observed. However, these intriguing liquid-repellent properties were not observed for the films of miscible P(St-b-PFA) and P(St-ran-PFA). Therefore, it can be concluded that the internal structure beneath the surface as well as the surface itself should be deeply considered to design excellent and stable liquid-repellent materials.     

The role of spin-orbit potential in nuclear prolate-shape dominance

It is confirmed, in terms of the Woods-Saxon-Strutinsky method, that the spin-orbit potential plays a decisive role in the predominance of prolate deformation, which has been a long standing problem in nuclear physics. It is originated from the combined effects of the spin-orbit coupling and the diffused surface of the potential, in agreement with the previous work based on a more schematic Nilsson-Strutinsky method. The degree of prolate-shape dominance exhibits an oscillatory behavior with respect to the strength of spin-orbit potential and, the prolate-shape dominance is realized at the proper strength of the spin-orbit potential together with the standard surface diffuseness; this oscillatory behavior disappears in case of small diffuseness corresponding to ellipsoidal cavity. The calculated energy differences between oblate and prolate minima in this Letter are consistent with those of our extensive self-consistent calculations of the Hartree-Fock + BCS method with the Skyrme interaction.