A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Synthesis and characterization of poly(higher‐α‐olefin)s with a nickel(α‐diimine)/methylaluminoxane catalyst system: Effect of chain running on the polymer properties

Homopolymerization of octadecene‐1 at different reaction conditions has been studied. Significant chain running can be seen at higher polymerization temperatures. Interestingly, insertion of octadecene‐1 into a sterically hindered nickel‐cation/carbon (secondary) bond is observed. The microstructure of the polymer was established using NMR spectroscopy. The effects of chain running on polymer melting, crystallization behavior, and dynamic mechanical thermal properties were studied using DSC and DMTA. The extent of chain running (i.e., 2,ω‐, 1,ω‐enchainments) decreases with an increase in the carbon number of α‐olefins. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 191–210, 2007     

A statistical thermodynamic supermolecule-continuum study of ion hydration: Cell and shell methods

A theoretical study of ion hydration using the statistical thermodynamic supermolecule-continuum method is described. The cell and shell methods are used for configurational averaging. Enthalpies, free energies and entropies are calculated for Li⁺, Na⁺, K⁺, F^– and Cl^– each four coordinated with water. The results are in reasonable accord with experiment. A comparison of the site method, cell method and shell method results is presented. The supermolecule-continuum approach to solvent effects seems to be capable of accommodating essential features for the calculation of solvation energy and solvent effects on structure and properties.     

Heuristic intermolecular potential function for the methane–water interaction based on ab initio quantum-mechanical calculations

An analytical potential function for the pairwise interaction of methane and water is reported. The function is representative of 225 ab initio quantum-mechanical calculations of the intermolecular interaction using 6–31G self-consistent-field molecular-orbital theory. The statistical parameters of the curve fitting are given and isoenergy contour maps of the interaction energy are presented and discussed.     

A transannular reaction during the base catalysed rearrangement of bicyclo(4.3.0)-2β-hydroxy-2α-vinyl-1β-Methyl-8-oxo-Δ6,7-nonene

Synthesis and rearrangement of bicyclo(4.3.0) - 2β - hydroxy - 2α - vinyl - 1β - methyl - 8 - oxo - Δ⁶ - nonene was observed to yield a transannular reaction product tricycio - (6.3.0.0^1,8) - 2 - methyl - 8α - hydroxy - 4 - oxo - Δ² - undecene 16. Spectral evidence supports the assigned structure.     

Novel photoreactors for heterogeneous photocatalytic wastewater treatment

Heterogeneous photocatalysis is an effective treatment method for removal of toxic pollutants from industrial wastewaters. A novel, thin film slurry photoreactor was evaluated in this work for its effectiveness in removing phenol. The efficiency of parameters, initial phenol and catalyst concentrations and the light intensity on phenol removal was studied. The reactor performed well giving near complete removal of phenol even at a higher concentration of 500 mg/l.     

Pressure and volume dependence of thelo-to phonons in InAs

The pressure dependence of thelo-to phonons in InAs has been investigated by Raman scattering using the diamond anvil cell. Indium arsenide transforms, presumably to the rock-salt structure at 70±1 kbar. The mode Grüneisen parameters for thelo-to phonons are γ _lo =0.99±0.03, γ _to =1.2±0.03 respectively. The effective charge,e* _T , for InAs decreases slightly with pressure and this trend is in accordance with the behaviour of other III–V zinc blende structured semiconductors: The structural phase transition is discussed in the light of theoretical calculations for phase stability of III–V compounds, as well as recent high pressure x-ray diffraction studies.     

Solvatochromism and prototropism of diaminodiphenyl sulphones and 2-aminodiphenyl sulphone: a comparative study by electronic spectra

A comparative study of absorption and fluorescence maxima of 4,4′-diaminodiphenyl sulphone (4DADPS), 3,3′-diaminodiphenyl sulphone (3DADPS) and 2-aminodiphenyl sulphone (2ADPS) in different solvents reveals that (i) solvatochromic shifts are found to be mainly due to interaction of solvents with amino group, (ii) in any one solvent the net solvatochromic shifts of two amino groups are less than that of one amino group, (iii) fluorescence shift from cyclohexane to water is a maximum for 4DADPS and a minimum for 2ADPS and (iv) 4DADPS and 3DADPS possess more twisted intramolecular charge transfer character than 2ADPS. The excited-state acidity constants, determined by fluorimetric titration and Förster cycle methods, have been reported and discussed.     

Effects of soluble surfactants on the deformation and breakup of stretching liquid bridges

Surfactants are routinely used to control the breakup of drops and jets in many applications such as inkjet printing, crop spraying, and DNA or protein microarraying. The breakup of surfactant-free drops and jets has been extensively studied. By contrast, little is known about the closely related problem of interface rupture when surfactants are present. Solutions of a nonionic surfactant, pentaethylene glycol monododecyl ether, or C12E5, in water and in 90 wt % glycerol/water are used to show the effects of surfactant and viscosity on the deformation and breakup dynamics of stretching liquid bridges. Equilibrium surface tensions for both solutions can be fitted with the Langmuir-Szyskowski equation. All experiments have been done at 24 degrees C. The critical micelle concentrations for C12E5 are 0.04 and 0.4 mM in water and the glycerol/water solution, respectively. With high-speed imaging, the dynamic shapes of bridges held captive between two rods of 3.15 mm diameter are captured and analyzed with a time resolution of 0.1-1 ms. The bridge lengths are 3.15 mm initially and about 5-7 mm at pinch-off. Breakup occurs after stretching for about 0.2-0.3 s, depending on the solution viscosity and the surfactant concentration. When the liquid bridges break up, the volume of the sessile drop left on the bottom rod is about 3 times larger than that of the pendant drop left on the top rod. This asymmetry is due to gravity and is influenced by the equilibrium surface tensions. Surfactant-containing low-viscosity water bridges are shown to break up faster than surfactant-free ones because of the effect of gravity. With or without surfactant, water bridges form satellite drops. Surfactant-containing high-viscosity glycerol/water bridges break up more slowly than surfactant-free ones because of strong viscous effects. Moreover, the shapes of the sessile drops close to breakup exhibit a "pear-like" tip; whether a satellite forms depends on the surface age of the bridge before stretching commences. These unexpected effects arising from the addition of surfactants are due to the capillary pressure reduction and Marangoni flows linked to dynamic surface tension.