Reactivity studies,structural characterization,and thermolysis of cubic titanosiloxanes: precursors to titanosilicate materials which catalyze olefin epoxidation

The cubic titanosiloxane [RSiO(3)Ti(OPr(i))](4) (R = 2,6-Pr(2)(i)C(6)H(3)NSiMe(3)) (1) is found to be relatively inert in its attempted reactions with alcohols and other acidic hydrogen containing compounds. The reaction of 1 with silanol (Bu(t)O)(3)SiOH however proceeds over a period of approximately 3 months to result in the hydrolysis of (Bu(t)O)(3)SiOH and yield the transesterification product [RSiO(3)Ti(OBu(t))](4) (2) rather than the expected [RSiO(3)Ti(OSi(OBu(t))(3))](4). Products 1 and 2 have been characterized by elemental analysis, thermal analysis, and spectroscopic techniques (IR, EI-MS, and NMR). The solid-state structures of both 1 and 2 have been determined by single-crystal X-ray diffraction studies. Compounds 1 and 2 are isomorphous and crystallize in a cubic space group with a central cubic Ti(4)Si(4)O(12) core. Solid state thermolysis of 1 was carried at 450, 600, 800, 900, 1000, and 1200 degrees C in air, and the resulting titanosilicate materials 1a-f were characterized by spectroscopic (IR and DR UV), powder XRD, and electron microscopic methods. While, the presence of Ti-O-Si linkages appears to be dominant in the samples prepared at lower temperatures (450-800 degrees C), phase separation of anatase and rutile forms of TiO(2) occurs at temperatures above 900 degrees C as revealed by IR spectral and PXRD studies. The presence of octahedral titanium centers was observed by DR UV spectroscopy for the samples heated at higher temperatures. The use of new titanosilicate materials as catalysts for olefin epoxidation has been investigated. The titanosilicate materials produced at temperatures below 800 degrees C with a large number of Ti-O-Si linkages (or tetrahedral titanium centers) were found to be more active catalysts compared to the materials produced above 900 degrees C. The observed conversion in the epoxidation reactions was found to be somewhat low although the selectivity of the epoxide formation over the other possible oxidized products was found to be very good.     

Experimental and computational investigation of coupled resonator–cavity systems

Launch vehicle noise is broadband in nature and the noise transmitted into the payload fairing is reduced by treating its interior with an acoustic absorption layer. The latest generation payload fairings are made from composite material which offer poor noise attenuation at low frequencies. One possible solution for reducing the low frequency noise is to use Helmholtz resonators tuned to a few of the dominant low frequency components, such as shell ring frequency or the first few cavity modes of the fairing. The paper presents a simplified modelling approach for numerical simulation of a coupled cavity–resonator system which is validated by experiments. The influence of damping and resonator volume fraction on the coupled system performance, to suppress the first axial mode in a cylindrical cavity, is shown and the resonator volume fraction required for significantly (more than 5 dB) suppressing the cavity axial mode is established.     

Selective, reversible, reagentless maltose biosensing with core-shell semiconducting nanoparticles

Reagentless and reversible maltose biosensors are demonstrated using ZnS coated CdSe (CdSe@ZnS) nanoparticle emission intensities. This method is based on electron transfer quenching of unimolecular protein-CdSe@ZnS nanoparticle assemblies, which is provided by a protein-attached Ru(II) complex. This Ru(II) complex is presumed to reduce a valence band hole of the CdSe@ZnS excited state by tunneling through the ZnS overcoating. The Ru(II) complex mediated quenching of CdSe@ZnS nanoparticle emission was only decreased 1.2-fold relative to the CdSe nanoparticle systems. While four different Ru(II) complex attachment sites provided different amounts of nanoparticle emission quenching (1.20 to 1.75-fold decrease), all of these attachment sites yielded maltose-dependent intensity changes (1.1 to 1.4-fold increase upon maltose addition). Maltose dissociation constants for these four biosensing systems range from 250 nM to 1.0 microM, which are similar to the maltose-maltose binding protein dissociation constant that these sensors are based on. The increased fluorescence intensity was found to only occur in the presence of maltose. Furthermore, the ability of these reagentless protein-nanoparticle assemblies to perform maltose biosensing reversibly is demonstrated with the addition of alpha-glucosidase. Three 50 microM maltose additions after alpha-glucosidase addition showed increases of 2.2 microM, 600 nM, and 150 nM maltose. This result demonstrates a fluorometric method for examining alpha-glucosidase activity. Using maltose binding protein to control Ru(II) complex interactions with CdSe@ZnS nanoparticle surfaces provide a novel class of highly fluorescent, photostable biosensors that are selective for maltose.     

Isolation,characterization, and plasmid pUPI126-mediated indole-3-acetic acid production in Acinetobacter strains from rhizosphere of wheat

Thirty-seven strains of Acinetobacter isolated and characterized from rhizosphere of wheat were screened for indole-3-acetic acid (IAA) production. Only eight Acinetobacter strains showed IAA production. The genus Acinetobacter was confirmed by chromosomal DNA transformation assay. Biotyping of eight strains was carried out and they were found to be genospecies of A. junii, A. baumannii, A. genospecies 3, and A. haemolyticus. Five of eight strains produced IAA at the early stationary phase: A. haemolyticus (A19), A. baumannii (A18, A16, A13), and Acinetobacter genospecies 3 (A15). A. junii A6 showed maximum IAA production at log phase and A. genospecies 3 and A. baumannii (A28, A30) at late stationary phase. IAA was extracted by ethyl acetate and purified by preparative thin-layer chromatography. Purified IAA was confirmed by ¹H-nuclear magnetic resonance and infrared spectrum analysis. Pot experiments showed a significant increase in plant growth inoculated with eight Acinetobacter genospecies as compared to control plants. IAA production was found to be encoded by plasmid pUPI126. All eight strains of Acinetobacter contain a plasmid pUPI126 with a molecular weight of 40 kb. Plasmid pUPI126 was transformed into Escherichia coli HB101 at a frequency of 5 × 10⁻⁵, and E. coli HB101 (pUPI126) transformants also showed IAA activity. PUPI126 also encoded resistance to selenium, tellurium, and lead. This is the first report of plasmid-encoded IAA production in the genus Acinetobacter.     

2D Zeolite Coatings: Langmuir–Schaefer Deposition of 3 nm Thick MFI Zeolite Nanosheets

Stable suspensions of zeolite nanosheets (3 nm thick MFI layers) were prepared in ethanol following acid treatment, which partially removed the associated organic structure‐directing agent. Nanosheets from these suspensions could then be dispersed at the air–water interface and transferred to silicon wafers using Langmuir–Schaefer deposition. Using layer‐by‐layer deposition, control on coating thickness was demonstrated. In‐plane X‐ray diffraction (XRD) revealed that the deposited nanosheets contract upon calcination similar to bulk MFI crystals. Different methods for secondary growth resulted in preferentially oriented thin films of MFI, which had sub‐12‐nm thickness in certain cases. Upon calcination, there was no contraction detectable by in‐plane XRD, indicating well‐intergrown MFI films that are strongly attached to the substrate.     

Kinetic and Catalytic Study on a Hydrazine Sulphate Induced Fine Particle Sulphated Titanium(IV) Oxide with High Catalytic Activity towards Esterification Reaction

Kinetics and Catalysis - Sulphated TiO2 was synthesized by the reaction of titanium isopropoxide with hydrazine sulphate as a sulphating agent followed by calcination of the resulting mixture at...     

Specific heat measurements in small samples at low temperature

We describe a calorimeter which has been used to measure the heat capacity of small samples weighing 50 to 200 mg in the temperature range of 1.5 K to 20 K. We have used the thermal relaxation method as well the heat pulse method for our measurements with the same experimental set-up. An accuracy of better than 5% is obtained with this system.     

Metal Containing New Inorganic Ring Systems Based on Siloxane and Phosphazane Frameworks

High-field ³¹P NMR spectroscopy and single crystal X-ray diffraction studies have been used to study the ring opening and nucleophilic substitution reactions of the λ³-cyclotriphosphazane [EtNPCl]₃. The synthesis of the ring opened silicophosphonate [RSi(OH){OP(O)(H)(OH)}]₂O (R = (2,6-iPr₂C₆H₃)NSiMe₃) (1) represents the first ever molecular silicophosphonate to be isolated bearing free reactive hydroxyl groups. The structure and conformation of the bulky aryloxide substituted λ³-cyclotriphosphazane derivative [EtNP(OAr)]₃ (Ar = 2,6-iPr₂C₆H₃) (2) has also been investigated. Interaction of 2 with transition metal precursor complexes leads to the isolation of phosphazane metal complexes with different mode of co-ordination of 2. Further, the reaction of Cp Ti(OAr)Cl₂ (Ar = 2,6-(CH₃)₂C₆H₃OH) with O{SiPh₂(OH)}₂ gave the eight-membered trititanosiloxane [Cp Ti(Cl) (O(SiPh₂O)₂SiPh₂O) (3). Siloxane chain expansion effects, presumed to be a consequence of ring strain, have been observed in the product. The presence of reactive Ti-Cl bond in 3 offers opportunities for its reaction chemistry to be explored.     

Synthetic application of lithiation reactions—xiv : Novel synthesis of 7,8-dimethoxy phenanthridine

The difficultly accessible 7,8-dimethoxy phenanthridine has been synthesised by organolithiation reaction in simple steps and in good yield.     

Liquid anion-exchange separation of vanadium(V) and niobium(V) from succinate solution

Tri-n-octylamine is used for the extraction and mutual separation of V(V), Nb(V) and Ta(V) from succinate solution. Niobium and vanadium are determined spectrophotometrically in the organic phase with thiocyanate and PAR, respectively. Tantalum is determined with PAR in an aqueous phase.