Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N₂ adsorption/desorption (BET), temperature-programmed reduction and desorption (H₂-TPR and O₂-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH₄ oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl₂O₄ catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl₂O₄ has acceptable stability during 600 min time of reaction.

Graphical abstract

     

Development of the ANN–KIM composed model to predict the nanofluid energetic thermal conductivity via various types of nano-powders dispersed in oil

Journal of Thermal Analysis and Calorimetry - Artificial neural network/kriging interpolation method optimization method which is evaluated concerned the hybrid nanofluid composed of iron oxide...     

Duality and the cosmological constant

A dynamical theory is studied in which a scalar field ϕ in Einstein-Minkowski space is coupled to the four-velocityN _μ of a preferred inertial observer in that space. As a consistent requirement on this coupling we study a principle of duality invariance of the dynamical mass term of ϕ at some universal length in the small-distance regime. In the large-distance regime duality breaking can be introduced by giving a background value to ϕ and a background direction toN _μ. It is shown that, in an appropriate approximation, duality breaking can be related to the emergence of a characteristic phase in which the condensation of the ground state allows massive excitations with a characteristic scale of squared mass which agrees with the present observational bound for the cosmological constant.     

A new approach based on the surrogating method in the project time compression problems

This paper develops a mathematical model for project time compression problems in CPM/PERT type networks. It is noted this formulation of the problem will be an adequate approximation for solving the time compression problem with any continuous and non-increasing time-cost curve. The kind of this model is Mixed Integer Linear Program (MILP) with zero-one variables, and the Benders' decomposition procedure for analyzing this model has been developed. Then this paper proposes a new approach based on the surrogating method for solving these problems. In addition, the required computer programs have been prepared by the author to execute the algorithm. An illustrative example solved by the new algorithm, and two methods are compared by several numerical examples. Computational experience with these data shows the superiority of the new approach.     

Kinetic study of the oxidation of ethanol by 3,4-lutidine chromium(VI) peroxide in dichloromethane solution

The oxidation kinetics of ethanol with 3,4-lutindine chromium(VI) peroxide (LCP) were investigated by monitoring the absorbance change at 565 nm in dichloromethane solution. The reaction had a first-order dependence on oxidant and a fractional (one half) dependence on reactant. The stoichiometric ratio between LCP and ethanol was 1 : 2. The activation parameters were determined from temperature dependence of the reaction rate. It was found that the cleavage of the peroxide groups of LCP is primarily responsible for the oxidant of ethanol to acetaldehyde. Based on the kinetic results obtained (including deuterium isotope effect) a plausible mechanism is proposed. © 1994 John Wiley & Sons, Inc.     

Microwave Assisted Conversion of Oximes and Semicarbazones to Carbonyl Compounds Using Benzyltriphenylphosphonium Peroxymonosulfate

Summary.  Benzyltriphenylphosphonium peroxymonosulfate in the presence of catalytic amounts of bismuth chloride was found to be an efficient and mild reagent for the oxidative cleavage of oximes and semicarbazones to the corresponding carbonyl compounds under microwave irradiation. Corresponding author. E-mail: haji@cc.iut.ac.ir Received March 4, 2002; accepted (revised) April 8, 2002     

Thermodynamic properties of transition metals in aqueous solution. 2. The enthalpies of mixing of aqueous solutions of CoCl2, CuCl2, and MnCl2 with NaCl at varying ionic strength at 25°C

Enthalpies of mixing (_m H) aqueous solutions of CoCl₂, CuCl₂, and MnCl₂ with NaCl solutions were measured at constant ionic strengths of 0.5, 1.0, and 3.0 molal at 25°C. The excess enthalpy equations of Pitzer were then fit to the resulting _m H data. The resulting parameters are the temperature derivatives of the activity coefficient mixing parameters in the Pitzer system. The heat of mixing data for CoCl₂ and CuCl₂ were in agreement with earlier isomolal results by other workers.