A two dimensional, experimental study on the evolution of the detachment and its time-behavior in filled rubber

Summary The detachment of a rubber matrix from a rigid inclusion under monotonic loading and at subsequent relaxation is investigated within two dimensional analysis. Examined are stress–strain experimental data acquired with the help of a test bed equipped with a digital image-acquisition device. The influence of the interfacial bonding strength and the particle size on the detachment process is analyzed. The influence of the interfacial bonding strength is visible in the stress–strain diagram of loading and in the recorded images. The relaxation test reveals no influence of the bonding strength on the stress-relaxation. However, the image analysis indicates a secondary transient creep of the contour of detachment, which depends on the interfacial bonding.     

Molecularly Imprinted Polypyrrole for DNA Determination

In this study graphite electrodes modified by a thin DNA‐imprinted polypyrrole layer, which was able to bind specific target‐DNA, are reported. For this aim, electrochemical synthesis of polypyrrole was performed on a pencil graphite electrode by cyclic voltammetry (CV) or by potential pulse sequences (PPS). The modified electrode surface was used for electrochemical determination of target‐DNA by differential pulse voltammetry. According to our best knowledge this is a first report on the application of DNA‐imprinted polymer for the determination of target‐DNA. The results showed that the molecularly imprinted polypyrrole (MIPPy) layer that formed on the carbon electrode surface was sensitive for target‐DNA, while the nonimprinted polypyrrole layer was not sensitive to the same target‐DNA. Comparison of electrodes modified using PPS and CV techniques is presented.     

Corrosion inhibition of zinc in aqueous acidic media using a novel synthesized Schiff base – an experimental and theoretical study

Abstract

The kinetics of H₂ production during Zn corrosion in 0.5?M HCl without and with various additives of N,N'-bis-(1-hydroxyphenylimine)-2,5-thiophenedicarboxaldehyde (HPTD) was studied using gasometry and electrochemical techniques. The surface of the corroded Zn samples was investigated using SEM and Optical Profilometry. The rate of H₂ production (RHP) increased with the immersion time and temperature. Presence of HPTD mitigated RHP due to an adsorption process. The electrochemical impedance spectroscopy showed that HPTD had a good inhibitive effect. Polarization data proved that HPTD acted as a surface-active mixed-type inhibitor. Some thermodynamic parameters were deduced and discussed. Theoretical calculations were also conducted to corroborate the capability of HPTD to protect Zn surface from corrosion process.     

A new reagent for the synthesis of [26]hexaphyrin: N-sulfonyl aldimine

The selective synthesis of [26]hexaphyrin(1.1.1.1.1.1) has been achieved by the reaction of meso-substituted tripyrrane and N-sulfonyl aldimine. The protocol is simple and requires only a catalytic amount of copper(II) triflate under mild reaction conditions.     

Asymmetric aldol addition of α-azido ketones to ethyl pyruvate mediated by a cinchona-based bifunctional urea catalyst

The first asymmetric synthesis of ethyl 4-aryl-3-azido-2-hydroxy-2-methyl-4-oxobutanoates via a cinchona organocatalyst induced aldol addition of α-azido ketones to ethyl pyruvate has been developed. The coupling reaction under optimized conditions was carried out to furnish tetrafunctionalized synthons with enantioselectivities of up to 91:9 and enriched diastereoselectivities of up to 95:5 (syn:anti).     

Multi-walled Carbon Nanotubes and Gold Nanorod Decorated Biosensor for Detection of microRNA-126

In this article, we introduced a novel electrochemical biosensor for the detection of microRNA-126. The biosensor utilizes a hybridization assay combined with multi-walled carbon nanotubes and gold nanorod-decorated screen-printed carbon electrodes. For electrode preparation, gold nanorods were first immobilized onto the surface of bare and multi-walled carbon nanotube-modified screen-printed carbon electrodes, and the thiol tagged-capture probe was immobilized on the electrode surface through gold and thiol group interaction. After the immobilization, thiol tagged-capture probe hybridized with the target sequence. Under optimum conditions, we determined limit of detection (LOD) and limit of quantification (LOQ) as high as 11 nM and 36 nM, respectively.     

Study of magnetic properties of Pd<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)<Subscript>0.95</Subscript>Mn<Subscript>0.05</Subscript> alloy using polarized muons and neutrons

The Pd_1?x Fe _x )_0.95Mn_0.05 alloy with random competing interaction was studied by measuring the muon spin relaxation in an external transverse magnetic field and in a zero magnetic field. Using the measured temperature dependence of the dynamic relaxation rate λ and the characteristics of the distribution of local static fields, the phase states of the sample under study are refined. In particular, it is shown that the ferromagnetic and spin-glass states coexist simultaneously in the sample below 25 K. Combined studies of the sample using the μSR and neutron depolarization methods made it possible to determine the size of magnetic inhomogeneities to be 2–6 μm in the temperature range 5–40 K.     

Ultrasound-assisted ozone bleaching of cotton

In this study, the effects of ultrasound on ozone treatment processes for bleaching cotton fabrics were investigated and compared with the conventional hydrogen peroxide bleaching process (60 °C over 90 min). Two ultrasonic + ozone treatments of cotton fabric samples were carried out: (1) ozone in an ultrasonic homogenizer (UH) and (2) ozone in an ultrasonic bath. Ozone dosages, temperature and time variations were determined with both ozone-ultrasonic bleaching processes. Whiteness, yellowness, weight, tensile strength properties, FTIR (ATR) spectra and visual appearance, via scanning electron microscopy of treated cotton fabrics as well as chemical oxygen demand (COD) of bleaching effluents, were investigated. It was concluded that the ozone + UH process, conducted for 30 min at 30 °C, produced closely equivalent values of cotton fabric whiteness and yellowness to the classic peroxide bleaching process, with slightly less weight loss, dramatically less COD in the process effluent (29 mg/l for ozone-UH vs. 4,316 mg/l for classical peroxide treatment), and without causing any adverse and/or detrimental effects on loss of fabric strength or elongation of the cotton fabrics. The ozone-UH process also leads to time and energy savings with much less environmental impact. Consequently, the combination of ozonation plus UH carried out at 30 °C over 30 min can be used successfully for cotton bleaching instead of the classic hydrogen peroxide bleaching process.