Anomalous thermal hysteresis in the SmC* phase of 10FHBBBM7*, revealed by dielectric measurements

The SmC* phase of (R)-4-(1-methylheptyloxycarbonyl)phenyl 4'-(4-decyloxy-3-fluorobenzoyloxy)-benzoate, 10FHBBBM7*, shows an anomalous thermal hysteresis that is reflected in the values of the measured dielectric constant. When the cooling-heating cycle is repeated, a memory effect occurs. In this work, we present a detailed study and a tentative interpretation of this unusual effect.     

Influence of heat treatment temperature of carbon fiber felt substrate on polyaniline electrosynthesis and its properties

Journal of Solid State Electrochemistry - Polyaniline was electrosynthesized using three voltammetric cycles on carbon fiber felts annealed at 1400, 1600, 2000, and 2300 K. Felts and...     

Calibration of gamma-ray spectrometers coupled to Compton suppression and fast pneumatic systems for the k<Subscript>0</Subscript>-standardized NAA method

A new Compton suppression system (CSS) for the gamma-ray spectrometer portion of the neutron activation analysis (NAA) was set up at the RPI/ITN. The pneumatic transfer system, SIPRA, for short-lived nuclides and cyclic irradiations was improved. A full calibration procedure of the CSS and SIPRA systems was performed. Two certified reference materials, NIST-SRM-1572 (Citrus Leaves) and NIST-SRM-1633a (Coal Fly Ash) were analyzed using the calibration factors. The CSS was instrumental in lowering the detection limits of Cr, Fe, Hg, Rb, Sr, Th and Zn by reducing background and/or spectral interference considerably. The analytical results were evaluated by comparison to the NIST certified values with deviations ranging from 2% to 8% for the above mentioned elements, except Zn ranging from 10% to 15% for biological and environmental samples, respectively.     

Structural characterization and in vivo evaluation of retinyl palmitate in non-ionic lamellar liquid crystalline system

Carrier systems for lipophilic drugs, such as the liquid crystalline systems (LCS) have been extensively studied to improve effect and selectivity. Retinyl palmitate (RP) is widely used in pharmaceutical and cosmetics products to improve the skin elasticity. The aim of this study was the development, characterization and the in vivo effectiveness of RP in non-ionic LCS structures. LCS containing polyether functional siloxane as oil phase, silicon glycol copolymer as surfactant and water in the ratio 30:10:60, with and without RP were studied. The results of the polarized light microscopy, small-angle X-ray scattering and rheology analysis indicated the presence of typical LCS structures with lamellar arrangement. Regardless of the presence of RP, the rheological studies showed the pseudo plastic behavior of the systems. However, highest hysteresis area was verified when comparing the system in the presence and in the absence of RP. Stability study SAXS monitored, carried out up to 30 days in various storage temperature conditions (25±2 °C, 37±2 °C and 5±2 °C) demonstrated the great structural stability of the LCS systems. The in vivo effectiveness analysis suggests that the RP-loaded LCS provided a significant reduction of the orbicular wrinkles in human volunteers (P=0.048).     

Ferromagnetic phase breakdown of a quenched bond-mixed Ising model

Within the framework of an effective field theory beyond Mean Field Approximation, we discuss the ferromagnetic phase stability limit in the temperature-concentration space of a quenched bond-mixed spin-$\text{1}\text{2}$ Ising model in square lattice for both competing and noncompeting interactions J₁ and J₂. Quite reasonable results are obtained in both situations. In particular for the case of competing interactions, numerical estimates of the vanishing temperature critical bond concentrations are predicted for particular values of the ratio $\text{J}{}_1\text{J}{}_2$.     

Rectal administration of nanosystems: from drug delivery to diagnostics

The rectal administration of drugs has been an enduring medical practice for either the management of local or systemic conditions. Although mostly regarded as an alternative to other delivery routes, the colorectal mucosa offers an effective pathway for enhanced systemic bioavailability of many active molecules. The fairly stable physicochemical and enzymatic environment of the mucosa and the possibility of partially avoiding the hepatic first-pass effect are some of the potential advantages of rectal drug delivery. At the same time, higher drug levels of drugs can be achieved at colorectal fluids and tissues, which can aid management of local conditions. However, problems with patient acceptability as well as poor and erratic drug absorption may impair efficient use of the rectal drug delivery route. The valuable features of nanotechnology-based systems for mucosal use are well recognized, and their potential as carriers for drug delivery has already been proven for different medical applications/delivery routes. Although still limited, the development of rectal nanomedicines with therapeutic, diagnostic, and prophylactic purposes is steadily emerging and may circumvent some of the problems associated with the more standard delivery approaches. This review discusses the rationale behind the use of nanotechnology-based strategies for rectal drug delivery and provides a critical overview on the various types of nanosystems proposed so far.     

On the influence of fatty acid chain unsaturation on supramolecular gelation of aminocarbohydrate-based supra-amphiphiles

Supramolecular gels are soft materials formed mainly by low molecular weight units held together by intermolecular interactions. Stabilizing these kinds of materials is quite a challenge due to the influence of multiple factors interfering with the integrity of the supramolecular structure. In our previous studies, we have shown that the aminocarbohydrate meglumine (MEG) interacts with organic acids by ion-pairing leading to the formation of MEG–carboxylate adducts. These adducts undergo supramolecular polymerization by heat treatment, but the macromolecular assembly was stable for a short period due to hydrogen bond (H-bond) breakup. Herein, we attempt to study the influence of hydrophobic building blocks on the formation of these compounds aiming to stabilize H-bonds to produce polymerizable supra-amphiphiles in water. Oleic acid and stearic acid are two analogous fatty acids differing only in the presence of unsaturation that were used in our studies. Results demonstrated that the presence of unsaturation hinders gelation in water by interfering with the self-assembly behavior of supra-amphiphiles. Thus, unsaturated supra-amphiphiles behave like traditional surfactants and gelify water at high concentrations (above 30% w/w). On the other hand, supramolecular gels with a polymer-like behavior could be produced with a saturated supra-amphiphile in water (above 4% w/w). The material was characterized by a lamellar arrangement that facilitates the alignment of H-bonds necessary to stabilize the self-assembled structure. These results have pivotal importance on the design of polymerizable supra-amphiphiles and demonstrate that the double bond of hydrophobic building blocks is an important design factor to be considered by scientists studying similar materials.     

Oil-in-water lecithin-based microemulsions as a potential delivery system for amphotericin B

In this work the structural features of microemulsions (MEs) containing the pharmaceutical biocompatible Soya phosphatidylcholine/Tween 20 (1:1) as surfactant (S), Captextrade mark 200 as oil phase (O), and phosphate buffer 10mM, pH 7.2 as aqueous phase (W) were studied. Systems obtained with different proportions of the components were described by pseudo-ternary phase diagrams in order to characterize the microemulsions studied here. MEs were prepared with and without the polyene antifungal drug amphotericin B (AmB). The maximum AmB incorporation into the ME system was dependent on both the oil phase and surfactant proportions with 6.80 and 5.7mg/mL in high contents, respectively. The incorporation of AmB into the ME systems significantly increased the profile of the droplet size of the ME for all ranges of surfactant proportions used in the formulations. The microstructures of the system were characterized by dynamic light scattering (DLS) and rheological behavior. The DLS results showed that the size of the oil droplets increases 4.6-fold when AmB is incorporated into the ME system. In all cases the increase in the proportion of the oil phase of the ME leads to a slight increase in the diameter of the oil droplets of the system. Furthermore, for both the AmB-loaded and AmB-unloaded MEs, the size of the oil droplets decrease significantly with the increase of the S proportion in the formulations, demonstrating the efficiency of the surfactant in stabilizing the ME. Depending on the ME composition, an anti-thixotropic behavior was found. The maximum increases of the consistency index caused by the increase of the oil phase of the ME were of 17- and 25-times for the drug-loaded and drug-unloaded MEs, respectively. However, the observed effect for the drug-loaded ME was about 4.6 times higher than that for the drug-unloaded one, demonstrating the strong effect of the drug on the rheological characteristics of the ME system. Therefore, it is possible to conclude that the investigated ME can be used as a very promising vehicle for AmB.     

Electronic Transport in Single-Stranded DNA Molecule Related to Huntington’s Disease

We report a numerical analysis of the electronic transport in single chain DNA molecule consisting of 182 nucleotides. The DNA chains studied were extracted from a segment of the human chromosome 4p16.3, which were modified by expansion of CAG (cytosine-adenine-guanine) triplet repeats to mimics Huntington’s disease. The mutated DNA chains were connected between two platinum electrodes to analyze the relationship between charge propagation in the molecule and Huntington’s disease. The computations were performed within a tight-binding model, together with a transfer matrix technique, to investigate the current-voltage (I–V) of 23 types of DNA sequence and compare them with the distributions of the related CAG repeat numbers with the disease. All DNA sequences studied have a characteristic behavior of a semiconductor. In addition, the results showed a direct correlation between the current-voltage curves and the distributions of the CAG repeat numbers, suggesting possible applications in the development of DNA-based biosensors for molecular diagnostics.     

Evolution of rheological properties and local structure during gelation of siloxane-polymethylmethacrylate hybrid materials

Hybrid siloxane-polymethylmethacrylate (PMMA) nanocomposites with covalent bonds between the inorganic (siloxane) and organic (polymer) phases were prepared by the sol gel process through hydrolysis and polycondensation of 3-(trimethoxysilyl)propylmethacrylate (TMSM) and polymerization of methylmethacrylate (MMA) using benzoyl peroxide (BPO) as initiator. The effect of MMA, BPO and water contents on the viscoelastic behaviour of these materials was analysed during gelation by dynamic rheological measurements. The changes in storage (G′) and loss moduli (G′′), complex viscosity (η^*) and phase angle (δ) were measured as a function of the reaction time showing the viscous character of the sol in the initial step of gelation and its progressive transformation to an elastic gel. This study was complemented by ²⁹Si and ¹³C solid-state nuclear magnetic resonance (NMR/MAS) measurements of dried gel. The analysis of the experimental results shows that linear chains are formed in the initial step of the gelation followed by a growth of branched structures and formation of a three-dimensional network. Near the gel point this hybrid material demonstrates the typical scaling behaviour expected from percolation theory.