Structural changes of biocompatible neutral microemulsions stabilized by mixed surfactant containing soya phosphatidylcholine and their relationship with doxorubicin release

Depending on the composition, the mixture of surfactant, oil and water, may form supramolecular aggregates with different structures which can significantly influence the drug release. In this work several microemulsion (ME) systems containing soya phosphatidylcholine (SPC) and eumulgin HRE40™ (EU) as surfactant, cholesterol (O) as oil phase, and ultra-pure water as an aqueous phase were studied. MEs with and without the antitumoral drug doxorubicin (DOX) were prepared. The microstructures of the systems were characterized by photon correlation spectroscopy, rheological behavior, polarized light microscopy, small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD). The results reveal that the diameter of the oil droplets was dependent on the surfactant (S) amount added to formulations. The apparent viscosity was dependent on the O/S ratio. High O/S ratio leads to the crystallization of cholesterol polymorphs phases which restricts the mobility of the DOX molecules into the ME structure. Droplets with short-range spatial correlation were formed from the ME with the low O/S ratio. The increase of the cholesterol fraction in the O/S mixture leads to the formation of ordered structures with lamellar arrangements. These different structural organizations directly influenced the drug release profiles. The in vitro release assay showed that the increase of the O/S ratio in the formulations inhibited the constant rate of DOX release. Since the DOX release ratio was directly dependent on the ratio of O/S following an exponential decay profile, this feature can be used to control the DOX release from the ME formulations.     

On the incorporation of the non-steroidal anti-inflammatory naproxen into cationic O/W microemulsions

Microemulsions (ME) containing hexadecyltrimethylammonium bromide (HTAB)/ethanol as surfactant, isopropylmyristate (IM) or butylstearate (BS) as oil phase and aqueous buffer were studied. Pseudo-ternary phase diagrams of the investigated systems were obtained at constant surfactant/cosurfactant molar ratio (1:5) by titration in order to characterize the proportions between the components to obtain clear systems. Oil in water microemulsions were prepared in a wide range of phase volume (phi). UV-vis absorption spectra of naproxen at pH 5.5 showed that the solubility of Np increases significantly in the presence of O/W ME in high phase volumes. For both, IM and BS microemulsions, the dynamic light scattering experiments showed that the size of the oil droplets remains constant in low values of phi, increasing abruptly in high phi values. Phase solubility study revealed that for both IM and BS microemulsions, the drug incorporation followed a straight-line profile in all range of phi. The data could be analyzed through the phase-separation model and the association constants (K) calculated varied from 27 to 90 M(-1), depending on the pH and on the microemulsion oil phase.     

Doxorubicin biocompatible O/W microemulsion stabilized by mixed surfactant containing soya phosphatidylcholine

Microemulsions (ME) containing soya phosphatidylcholine (SPC)/polyoxyethylenglycerol trihydroxystearate 40 (EU)/sodium oleate (SO) as surfactant cholesterol (CHO) as oil phase and aqueous buffer were studied. Pseudo-ternary phase diagrams of the investigated systems were obtained at constant SPC/EU/SO weight ratio 3.5:3.5:3.0 by titration, in order to characterize the proportions between the components to form clear systems. The dynamic light scattering results showed that the size of the oil droplets decreases significantly with the ratio of surfactant/oil phase added to system. Depending on the composition ME system could exhibit a thixotropic behavior. The apparent viscosity increased 25- and 13-folds with cholesterol concentration for drug-free and drug-load ME, respectively. It was also verified that the octanol/aqueous buffer partition coefficient (KO/B) of doxorubicin (DOX) was pH dependent increasing abruptly above pH 6.0. It was possible to incorporate 2.24 mg/ml of DOX into ME. The incorporation of DOX in the ME systems increased the droplets size for all surfactant concentrations used in the system. The results suggest that DOX interacts with the microstructure of the ME at the studied pH increasing significantly the drug solubility. It was possible to conclude that the investigated ME can be a very promising vehicle as drug-carrier for administration of doxorubicin.     

Probing the microstructure of nonionic microemulsions with ethyl oleate by viscosity, ROESY, DLS, SANS, and cyclic voltammetry

Microemulsions are important formulations in cosmetics and pharmaceutics and one peculiarity lies in the so-called "phase inversion" that takes place at a given water-to-oil concentration ratio and where the average curvature of the surfactant film is zero. In that context, we investigated the structural transitions occurring in Brij 96-based microemulsions with the cosmetic oil ethyl oleate and studied the influence of the short chain alcohol butanol on their structure and properties as a function of water addition. The characterization has been carried out by means of transport properties, spectroscopy, DLS, SANS, and electrochemical methods. The results confirm that the nonionic Brij 96 in combination with butanol as cosurfactant forms a U-type microemulsion that upon addition of water undergoes a continuous transition from swollen reverse micelles to oil-in-water (O/W) microemulsion via a bicontinuous region. After determining the structural transition through viscosity and surface tension, the 2D-ROESY studies give an insight into the microstructure, i.e., the oil component ethyl oleate mainly is located at the hydrophobic tails of surfactant while butanol molecules reside preferentially in the interface. SANS experiments show a continuous increase of the size of the structural units with increasing water content. The DLS results are more complex and show the presence of two relaxation modes in these microemulsions for low water content and a single diffusive mode only for the O/W microemulsion droplets. The fast relaxation reflects the size of the structural units while the slower one is attributed to the formation of a network of percolated microemulsion aggregates. Electrochemical studies using ferrocene have been carried out and successfully elucidated the structural transformations with the help of diffusion coefficients. An unusual behavior of ferrocene has been observed in the present microheterogeneous medium, giving a deeper insight into ferrocene electrochemistry. NMR-ROESY experiments give information regarding the internal organization of the microemulsion droplets. In general, one finds a continuous structural transition from a W/O over a bicontinuous to an O/W microemulsion, however with a peculiar network formation over an extended concentration range, which is attributed to the somewhat amphiphilic oil ethyl oleate. The detailed knowledge of the structural behavior of this type of system might be important for their future applications.     

Recent developments in the methodology and application of MEEKC

MEEKC is an electrodriven separation technique that utilises the unique properties of a microemulsion (ME) as a background electrolyte to achieve separation of a diverse range of solutes. MEs are composed of nanometre-sized oil droplets suspended in aqueous buffer, which is commonly referred to as oil-in-water ME. The droplets are stabilised by the presence of both a surfactant and co-surfactant. The use of water-in-oil MEs in MEEKC has also been investigated. This review details the advances in MEEKC-based separations from the period June 2008 - June 2010. Areas covered include online sample concentration, suppressed electroosmosis MEEKC, chiral separations, MEEKC-MS, MEEKC-ICP-MS and ME structure characterisation. The review also includes a fundamental introduction to MEEKC, along with a review of recent applications.     

Formation and characterization of self-assembling fish oil microemulsions

The novel fish oil O/W microemulsion system is formed with food-acceptable components, Tween 80, ethyl oleate, fish oil and water. We studied the influence of fish oil proportion in the oil phase on the microemulsion regions. We investigated this system using the dynamic light scattering and transmission electron microscopy; the rheological characteristics and release effect were also explored. The obtained results indicated that the particle sizes of spherical droplets in microemulsions depend significantly on the total oil phase content, varying from 5 to 198 nm. The rheological measurements showed that all studied microemulsions followed shear thinning behavior. Well-controlled release profile of the fish oil microemulsions was found in different dialyzate solutions.     

Effect of alpha-lactalbumin on aerosol-OT phase structures in oil/water mixtures

The ability of water-soluble, globular proteins to tune surfactant/oil/water self-assemblies has potential for the formation of biocompatible microemulsions and also plays a role in protein function at biological interfaces. In this work, we examined the effect of the protein alpha-lactalbumin on Aerosol-OT (AOT) phase structures in equivolume mixtures of oil and 0.1 M brine. In this pseudo-ternary system, surfactants are free to move to either oil or water phase to adopt phase structures close to the spontaneous curvature of the surfactants. Using small-angle X-ray scattering, we observed that addition of this protein changed the spontaneous curvature of the surfactant monolayer substantially. In the absence of protein, AOT adopted a negative spontaneous curvature to form spherical w/o microemulsion droplets. When less than 1 wt % of alpha-lactalbumin was added into the system, the w/o droplets became nonspherical and larger in volume, corresponding to an increase in water uptake into the droplets. As the protein-to-surfactant ratio increased, protein, surfactant, and oil increasingly partitioned toward the aqueous phase. There the protein triggered the formation of o/w microemulsions with a positive spontaneous curvature. These protein-containing structures exhibited significant interparticle attraction. We also compared the influence of two oil types, isooctane and cyclohexane, on the protein/surfactant interactions. We propose that the more negative natural curvature of the AOT/cyclohexane monolayer in the absence of protein prevented protein incorporation within organic phase structures and consequently pushed the system self-assembly toward aqueous aggregate formation.     

Microstructure and structural transition in microemulsions stabilized by aldonamide-type surfactants

Significant efforts were undertaken to characterize the microstructure and structural properties of water-in-oil (w/o), oil-in-water (o/w), and bicontinuous (bc) microemulsions composed of N-alkyl-N-methylgluconamides (n-alkyl = n-C(12)H(25), n-C(14)H(29), n-C(16)H(33)) and n-alcohols (ethanol, n-propanol, n-butanol) or iso-alcohols (iso-propanol, iso-butanol) as cosurfactants, as well as iso-octane and water. The internal structure of so created four-component system was elucidated by means of an analysis of isotropic area magnitudes in phase diagrams and conductivity measurements. Dynamic light scattering (DLS) measurements provided the microemulsion size and polydispersity. Polarity and viscosity of microemulsion microenvironment were acquired by means of electron paramagnetic resonance (EPR), UV-vis absorption spectroscopy (in the case of w/o droplets), and steady-state fluorescence (SSF) (in the case of o/w droplets). The results show that both the surfactant and the cosurfactant types affect the shape and extent of microemulsions. The size of droplets depends strongly on the type of examined microemulsion and the type of cosurfactant (linear or brunched) but is almost independent of the length of the surfactant alkyl chain. The size of microemulsion droplets ranges from 8.1 to 22.6 nm and from 3.7 to 14.3 nm respectively, for o/w and o/w microemulsions, making them good candidates for both template-based reactions and household components solubilizing media.     

Phase behavior and microstructure of C12E5 nonionic microemulsions with chlorinated oils

New non-ionic microemulsions consisting of pentaethyleneglycol dodecyl ether, water, and 1-chloroalkanes were prepared, and their phase behavior was studied. A homologous series of five different 1-chloroalkanes from 1-chlorooctane to 1-chlorohexadecane was studied. The phase behavior of the microemulsions was determined by vertical sections through the Gibbs' phase prism ("fish" plots), from which valuable information such as the microemulsion balance temperature (T(0)), efficiency of the surfactant (phi*), temperature extension of the three-body phase (DeltaT), mean temperature (T(m)), and the monomeric solubility in oil (phi(mon,oil)) was obtained. The chlorinated alkanes in the microemulsions shift the balance temperature to about 14 degrees C lower compared with their n-alkane counterparts. This indicates the polar nature of the chlorinated oils and their ability to penetrate the surfactant film. The chlorinated alkanes thus behave as short n-alkane molecules and lower the spontaneous curvature of the microemulsion droplets. The efficiency of the surfactant and the monomeric solubility in oil systematically depend on the alkyl chain length of the oil, with the efficiency and solubility decreasing with increasing alkyl chain length of 1-chloroalkane. The size and shape of the microemulsion droplets in the microemulsion phase were studied by small-angle X-ray scattering (SAXS). For a surfactant-to-oil volume fraction ratio of 0.80, the droplets can be described by ellipsoidal shapes, and the size of the droplets increased with increasing alkyl chain length.     

Recent advances in microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) is an electrodriven separation technique. Separations are typically achieved using oil-in-water microemulsions, which are composed of nanometre-sized droplets of oil suspended in aqueous buffer. The oil droplets are coated in surfactant molecules and the system is stabilised by the addition of a short-chain alcohol cosurfactant. The novel use of water-in-oil microemulsions for MEEKC separations has also been investigated recently. This report summarises the different microemulsion types and compositions used to-date and their applications with a focus on recent papers (2002-2004). The effects of key operating variables (pH, surfactant, cosurfactant, oil phase, buffer, additives, temperature, organic modifier) and methodology techniques are described.     

Relationship between structural features and in vitro release of doxorubicin from biocompatible anionic microemulsion

In this work structural features of anionic microemulsions, containing the pharmaceutical biocompatible components soya phosphatidylcholine (SPC), eumulgin HRE 40 (EU) and sodium oleate (SO) as surfactant, cholesterol (CHO) as oil phase and aqueous buffer were studied. Microemulsions were formulated with and without the antitumor drug doxorubicin (DOX). The various microstructures characterized in the pseudo-ternary phase diagram were analyzed by polarized light microscopy, small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD) as well as by their ability to incorporate and release DOX. The experimental results demonstrated a correlation between the composition, the structural features and drug delivery. It was found that at higher cholesterol contents, the crystallization of CHO polymorph phases changed the mobility of DOX molecules. Droplets were formed with short-range spatial correlation from a microemulsion (ME) with a low surfactant:oil ratio. More ordered structures with lamellar arrangements formed by the increasing of the CHO proportions in the formulation may be due to CHO crystallization. The in vitro release of DOX showed that the presence of a high content of crystalline CHO prolongs the release of DOX from ME. The retention of DOX in the internal oil phase of the ME may modulate the drug release for a prolonged time. These results clearly demonstrate the potential of ME as a drug-delivery system.     

Viability and permeability across Caco-2 cells of CBZ solubilized in fully dilutable microemulsions

The purpose of this study was to evaluate the viability and permeability of carbamazepine (CBZ) solubilized in fully dilutable non-ionic microemulsions across Caco-2 cells used as a model for intestinal epithelium. Maximum solubilization capacity (SC) of CBZ was determined within water-in-oil (W/O), bicontinuous and oil-in-water (O/W) structures formed upon dilution. The effect of the nature of the oil phase, surfactant type, and the ratio between the oil phase and surfactant on the quantity of solubilized CBZ, droplets size, the viability of the cells and drug permeability was elucidated. We found that: (1) several fully dilutable microemulsions based on pharma-grade ingredients can be loaded with very significant amounts of CBZ, (2) W/O microemulsions (10wt% water) exhibit up to 3-fold higher solubilization capacity over the drug's solubility in oil (triacetin), (3) CBZ in the O/W microemulsions (80wt% water) exhibit up to 29-fold higher solubilization than in water, (4) the O/W droplets of the examined systems are 9-11nm in size, (5) the highest permeability was obtained in systems containing triacetin/alpha-tocopherol acetate/ethanol in 3/1/4wt% ratio as oil phase and Tween 60 as surfactant, (6) the replacement of alpha-tocopherol acetate by alpha-tocopherol inhibits CBZ release, (7) replacement of a saturated chain of Tween 60 by an unsaturated (Tween 80) or shorter chain (Tween 40) inhibited drug release, (8) the decrease in the oil phase to surfactant ratio leads to enhancement of drug release (dilution line 64>dilution line 73).     

Improved solubilization of Celecoxib in U-type nonionic microemulsions and their structural transitions with progressive aqueous dilution

Celecoxib (clxb) is an important drug for treatment of rheumatoid arthritis and osteoarthritis by specifically inhibiting the enzyme cyclooxygenase-2 (COX-2). Clxb is a type 2 drug characterized by low water solubility (<5 mug/ml) and fast transmembrane transport. The present formulations require high dosage since the transmembrane transport fluctuates and is very difficult to control. Dissolving the drug within an oil phase was not practical since its dissolution was very small and its dispersion in water was impossible. In our recent studies, we learned to construct U-type phase diagrams and to formulate reverse microemulsions (oil-based concentrates) that are progressively and fully dilutable with aqueous phase. In the present study, we solubilized clxb in nanostructures of reverse micelles of U-type nonionic microemulsions that consisted of R(+)-limonene, alcohol, propylene glycol (PG), and hydrophilic surfactant (Tween 60). The solubilization capacity of the drug in these systems is many times higher than in either the oil or the aqueous phase. The clxb solubilized microemulsions are fully diluted with aqueous phase without phase separation. The solubilization capacity decreases as the water content increases. Electrical conductivity, viscosity, and self-diffusion (SD) coefficients of the microemulsion components were measured along a suitable water dilution line. The three major microemulsion regions were detected and the transitions between the W/O to bicontinuous phase and from this phase to the O/W droplets were identified (at 30 and 70 wt% aqueous phase, respectively). From the SD coefficients, it was found that the drug is initially solubilized at the interface of the W/O droplets and there are no significant structural changes. The transition to a bicontinuous phase occurs at the same water content as in the empty (i.e., without drug) system. From the viscosity profiles, we concluded that the drug affects the structure of the bicontinuous phase as reflected in the water content at which the oil-continuous network is destroyed and full inversion occurs (50 vs 55 wt% in the drug-loaded system). Upon further dilution the drug remains solubilized at the interface and is oriented with its hydrophilic part facing the water, and is strongly affects the inversion to O/W droplets. From Small Angle X-ray Scattering (SAXS) measurements we learned that the drug effects the structure of microemulsion droplets and forms "ill-defined structures," probably less spherical. Yet, the overall droplet sizes at the high dilutions did not change very much.     

Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented.     

Effect of charge density fluctuations within a droplet on dielectric polarization of ionic microemulsions

A statistical model of the dielectric polarization of ionic water-in-oil microemulsions is proposed. The model makes it possible to describe the effect of temperature and dispersed phase content on the static dielectric permittivity behavior of the microemulsions at a region far below percolation. With the help of this model, the microemulsions formed with the surfactant, sodium bis(2-ethylhexyl) sulfosuccinate (AOT), have been analyzed. The studied systems are considered to consist of nanometer-sized spherical non-interacting water droplets of equal size with negatively charged head groups , staying at the interface and positive counterions Na⁺, distributed in the electrical diffuse double layer of the droplet interior. It can be conjectured that two different mechanisms, that provide an increase of the static dielectric permittivity as a function of temperature, may take place. These may be attributed either to the aggregation of droplets or the temperature growth of polarizability of non-interacting and therefore non-aggregating droplets dispersed in oil. The results support the hypothesis that the experimental temperature behavior of dielectric polarization far below the percolation region is only due to the polarization of a single droplet and not to an aggregation. The droplet polarizability is proportional to the fluctuation mean-square dipole moment of a droplet. It is shown that this mean-square dipole moment and the corresponding value of the dielectric increment, depend upon the equilibrium distribution of counterions within a diffuse double layer. The density distribution of ions is determined by the degree of the dissociation of the ionic surfactant. The dissociation of the ionic surfactant in the system has been analyzed numerically. The relationship between the constant of dissociation and the experimental dielectric permittivity has been ascertained.     

Decrease of droplet size of the reverse microemulsion 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/cyclohexane by addition of water

In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) revealed that the size of microemulsion droplets decreased remarkably with increasing water content although water is often used as a polar component to swell reverse microemulsions. It was thus deduced that the number of microemulsion droplets was increased which was confirmed by conductivity measurements. The states of dissolved water were investigated by Fourier transform IR (FTIR) spectroscopic analysis showing that water molecules mainly act as bound water. 1H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further revealed that water molecules were mainly located in the periphery of the polar core of the microemulsion droplets and behave like a chock being inserted in the palisade layer of the droplet. This increased the curvature of the surfactant film at the IL/cyclohexane interface and thus led to the decrease of the microemulsion droplet size. The order of surfactant molecules arranged in the interface film was increased and thus induced a loss of entropy. Isothermal titration calorimetry (ITC) indicated that an enthalpy increase compensates for the loss of entropy during the process of microstructural transition.     

Tuning commercial diesel to microemulsified and blended form: phase behavior and implications

Abstract

Microemulsification and blending of commercial diesel is under constant research for possible fuel application. Microemulsions (ME) were prepared using diesel (D), kerosene (K), diesel and kerosene mixtures at various proportions (D?+?K) (oil phase: O), Triton X-100 surfactant (S), n-butanol, isobutanol (i-butanol), n-pentanol and n-octanol cosurfactants (C), and aqueous phase (W) containing water or brine for the study. Electrical conductance studies and temperature-induced separation of phase have been adopted for recognizing the o/w, w/o and bicontinuous zones. Dye probing has been done to explain the mass transfer among these phases. Percent of solubilization of oil in water has been enumerated in some of the ME. The possible fuel applications of the microemulsions are predicted from their density and flame brightness.     

Temperature-induced phase separation in pseudoternary mixtures of Triton X-100–butanol–kerosene–water

The transparent Winsor IV domain in the phase diagram of the mixtures of emulsifier (Triton X-100 and butanol), oil (kerosene), and water is found to be 34% of the total phase diagram in presence of emulsifier with surfactant:cosurfactant::1:1, and is water dominant. Increase in cosurfactant/surfactant ratio inverts the Winsor IV domain to become oil rich. The plot of conductance of the microemulsions prepared by substituting water by brine against water content depicts the existence of three distinct phases like oil-in-water, bicontinuous, and water-in-oil microemulsion in the phase diagram. The phase contrast micrographs of the mixtures of different compositions in these three different phases reveal the existence of microdroplets of oil dispersed in water and water dispersed in oil. Further, the dynamic light scattering studies of these solutions reveal an inhomogeneity in the size distribution of the droplets. A temperature-induced clouding in the microemulsion domain leading to phase separation has been observed. Additives like glucose, sucrose, and sodium chloride decrease the cloud point (CP), while addition of ammonium thiocyanate increases it. A quantitative relationship of the clouding temperature with the composition of the microemulsion has been established. With increase in oil and emulsifier, the cloud point of the microemulsion increases. The separated phases after the clouding have been used for preconcentration of water-soluble metal ions as well as oil-soluble dyes. The turbid systems on heating led to separation into three isotropic phases which are found to be stable at ambient temperature. The stability of these phases is ascribed to the formation of stable microemulsions by mass transfer from one phase to other.     

AOT water-in-oil microemulsions as a penetration enhancer in transdermal drug delivery of 5-fluorouracil

In vitro transdermal permeation of 5-fluorouracil (antineoplastic), a hydrophilic drug encapsulated in AOT/water/isopropylmyristate water-in-oil microemulsions (MEs), were studied using a modified Keshary and Chien diffusion cell. AOT (aerosol-OT or sodium bis(2-ethylhexyl) sulfosuccinate) is an anionic surfactant, which forms 'water-in-oil' ME in non-aqueous medium. The effect of water and AOT concentrations in MEs to the transdermal permeation of 5-fluorouracil through hairless mouse skin was investigated. MEs with 5:95 weight ratio of AOT:isopropylmyristate, containing 0.9, 1.8, 2.7 and 3.6% w/w of water have showed 1.68-, 2.36-, 3.58- and 3.77-fold increases in the skin flux of 5-fluorouracil (5-FU) respectively, compared to the aqueous solution of drug. The MEs with 5:95, 9:91 and 13:87 weight ratio of AOT:isopropyl myristate at fixed water content W0=15 (W0=[H2O]/AOT]) gave 3.58-, 5.04- and 6.3-fold enhancement of drug. In addition, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy was used to examine the effect of ME on lipid alkyl chain, hydration level, and corneocyte cells of the stratum corneum (SC). Results reveal that the ME interacts with a component of the SC and perturbs its architectural structure. The extent of perturbation in the SC depends on the concentration of water and AOT in the ME. Preliminary dermal toxicity studies indicate that the AOT/water/isopropylmyristate ME be safe for the transdermal permeation of 5-FU.