Synthesis of the southern furan segment of furanocembranoids

Abstract

A convergent synthesis of the southern furan segment of novel furanocembranoids from Croton oblongifolius has been accomplished involving silver-catalyzed cyclization of alkynyl diol as the key step towards 2, 5-disubstituted furan ring formation.     

Oxotitanium(IV) complexes of some bis‐unsymmetric Schiff bases: Synthesis,structural elucidation and biomedical applications

A number of oxotitanium(IV) complexes of the type TiOL with bis‐unsymmetric dibasic tetradentate Schiff base (LH₂) containing ONNO donor atoms have been synthesized. Mono‐Schiff base (OPD‐HNP) was prepared by the condensation of 1:3 molar ratio of 2‐hydroxy‐1‐naphthaldehyde (HNP) with o‐phenylenediamine (OPD). Dibasic unsymmetric tetradentate diamine Schiff bases were prepared by the reaction of OPD‐HNP with 2‐hydroxyacetophenone, 2‐hydroxypropeophenone, benzoylacetone, acetylacetone and ethylacetoacetate. Further, titanylacetylacetonate was reacted with these ligands to obtain their metal complexes. On the basis of analytical and physiochemical data, the formation of complexes as TiOL was suggested having square pyramidal geometry. Quantum mechanical approach also confirmed this geometry. The assessment of the synthesized ligands and their complexes showed that some behave as good inhibitors of mycelial growth against selected phytopathogic fungi but weak inhibitors against some selected bacteria. A few of them also showed antioxidant properties.     

A modified sequential extraction method for arsenic fractionation in sediments

A modified sequential extraction method was developed to characterize arsenic (As) associated with different solid constituents in surficial deposits (sediments), which are unconsolidated glacial deposits overlying bedrock. Current sequential extraction methods produce a significant amount of unresolved As in the residual fraction, but our proposed scheme can fractionate >90% of the As present in sediments. Sediment samples containing different As concentrations (3–35 μg g⁻¹) were used to assess the developed method. The pooled amount of As recovered from all the fractions using the developed method was similar (83–122%) to the total As extracted by acid digestion. The concentrations of As in different fractions using the developed scheme were comparable (89–106%) to the As fractions obtained by other existing methods. The developed method was also evaluated for the sequential extraction of other metals such as copper (Cu), cobalt (Co), chromium (Cr) and strontium (Sr) in the sediment samples. The pooled concentrations of these four individual metals from all the fractions were similar (96–104%) to their total concentrations extracted by acid digestion. During method development, we used extractants that did not contain chloride to eliminate formation of polyatomic ions of argon chloride (⁴⁰Ar³⁵Cl) that interfered with ⁷⁵As when analyzed using inductively coupled plasma mass spectrometer (ICP-MS). The results suggest that the developed method can reliably be employed for complete As and other metals’ fractionation in sediments using ICP-MS.     

Work place air particulate monitoring of automobile workshops for public health and safety

Twenty-eight pairs of coarse and fine air particulate samples were collected in front of an automotive workshop located at Tasmasipabad on Chaklala Road in Rawalpindi using a Gent sampler and polycarbonate filters. These samples were collected during the period; 7th to 27th of April 2009. The gravimetric data (PM_2.5 and PM₁₀) were obtained for these samples and were found to exceed the Pakistani standards. Black carbon (BC) was also determined using reflectance measurements and it was found that BC contributed significantly more to the fine mass than to the coarse fraction; i.e. ~10 to ~3 %, respectively. This is not surprising as soot is emitted by combustion processes and is usually found in the fine particulate mass. Using instrumental neutron activation analysis technique all 28 pairs of filters were analyzed for >30 elements. Major elements, in the coarse mass fraction, include Al, K, Fe, Sr, Na, and Zn implying soil as the major source while BC was found to be a higher contributor of PM_2.5. An episode of high PM_2.5 was observed on the 18th of April 2009. Back trajectory analysis showed that the air mass originated from the Middle East where a dust storm was in progress over Iraq.     

Evaluation of laboratory performance using proficiency test exercise results

The IAEA conducted the IAEA-CU-2006-06 Proficiency Test (PT) on “The determination of major, minor and trace elements in ancient Chinese ceramic” in 2006. The results of this PT showed that of the 21 analytes reported by our laboratory 9 failed the precision criteria. Therefore the results reported by our laboratory along with the results of other laboratories which carried out analysis using neutron activation analysis (NAA) were studied. It was found that the major factor contributing towards data falling in the “Warning” category, failing the precision criteria was the high uncertainties cited in the certificates of the reference materials (RMs) used for quantification of data. In this regard, it is recommended that synthetic standards should be prepared and used on a routine basis especially for the measurement of the elements K, Eu, Lu, Ta, Tb and Yb.     

A note on the second problem of Stokes for Maxwell fluids

New exact solutions corresponding to the second problem of Stokes for Maxwell fluids have been established by means of Laplace transforms. For large times, these solutions reduce to the well-known steady-state solutions which are periodic in time and independent of the initial conditions. Furthermore, the transient solutions are in accordance with the previous solutions obtained using the Fourier sine transform. The required time to get the steady-state is determined by graphical illustrations. This time decreases if the frequency of the velocity increases. The effects of the material parameters on the decay of the transients in time are also investigated by graphs.     

A universal blown film apparatus for <Emphasis Type="Italic">in situ</Emphasis> X-ray measurements

A setup of blown film machine combined with in situ synchrotron radiation X-ray diffraction measurements and infrared temperature testing is reported to study the structure evolution of polymers during film blowing. Two homemade auto-lifters are constructed and placed under the blown machine at each end of the beamline platform which move up and down with a speed of 0.05 mm/s bearing the 200 kg weight machine. Therefore, structure development and temperature changes as a function of position on the film bubble can be obtained. The blown film machine is customized to be conveniently installed with precise servo motors and can adjust the processing parameters in a wide range. Meanwhile, the air ring has been redesigned in order to track the structure information of the film bubble immediately after the melt being extruded out from the die exit. Polyethylene (PE) is selected as a model system to verify the feasibility of the apparatus and the in situ experimental techniques. Combining structure information provided by the WAXD and SAXS and the actual temperature obtained from the infrared probe, a full roadmap of structure development during film blowing is constructed and it is helpful to explore the molecular mechanism of structure evolution behind the film blowing processing, which is expected to lead to a better understanding of the physics in polymer processing.     

Ionic studies of sodium alginate isolated from Sargassum terrarium (brown algea) karachi coast with 2,1-electrolyte

Physical and chemical analysis of the polysaccharide isolated from Sargassum Terarrium (brown algae) of Karachi coast showed characteristics of the sodium alginate. Optical rotations and sulphated ash content were found and FTIR spectra showed a sharp and strong absorption band at 1600 cm^?1 representing carboxylate ion which conforms high uronic acid content of the product. The viscosities of aqueous 0.1% sodium alginate solution were measured in the presence of copper II chloride (CuCl₂). The viscosities were found to be increased with the increase in the concentration of electrolyte. Viscosities were also found affected with temperature. ‘A’ and ‘B’ coefficients of Jones–Dole equation were evaluated. The increase in positive values of ‘B’ coefficient with the rise of temperature led to conclusion that given electrolyte in 0.1% aqueous sodium alginate solution behaves as structure maker. Thermodynamic parameters regarding to activated state like energy of activation E_η, change in free energy of activation ΔG_η and change of entropy of activation ΔS_η were also evaluated. Straight-line plots of log η versus 1/T observed with positive slopes show the effect of temperature on the viscosities of solutions. Energy of activation (E_η) was found to be decreased with the rise of temperature. Change in free energy of activation (ΔG_η) was also found to be increased with increase in concentrations of electrolyte and also with rise of temperature. The values of change in entropy of activation (ΔS_η) were also calculated. Negative values of ΔS_η were found to be increased with increase in concentration of electrolyte and also with rise of temperature.     

Assessing soil pollution from a municipal waste dump in Islamabad, Pakistan: a study by INAA and AAS

INAA and AAS techniques have been employed to determine 40 elements in soil of a municipal waste dump in sector H-11, Islamabad. Background soil was also analyzed to study the extent of contamination of the dump site soil. Most of the major elements in these soils represented the geochemical composition of the soil in this area. The enrichment factors for quantified elements identified high Sb and Mg contents that could be attributed to the presence of PET and food materials in the waste. Geo-accumulation Index (I _geo), Pollution Index (PI) and the Integrated Pollution Index (IPI) have also been calculated for all elements. The values for these indices show that municipal waste has distorted the soil ambiance and the soil of waste dump site is slightly to moderately polluted as compared to the background soil. The dump soil was found to be moderately polluted by the elements Ba, Br, Ga, Rb, Zn, Ni and Pb. Significantly high Cu, Mg and Sb contamination was observed for the waste soil that is likely to pose an environmental issue if current waste disposal procedures are continuously employed.     

Effect of tri-potassium phosphate on volumetric,acoustic, and transport behaviour of aqueous solutions of 1-ethyl-3-methylimidazolium bromide at T = (298.15 to 318.15) K

Density, sound velocity, and viscosity of 1-ethyl-3-methylimidazolium bromide, [Emim][Br], in aqueous solutions of tri-potassium phosphate with salt weight fractions (w_s = 0.00, 0.10, 0.15, and 0.20) have been measured as a function of concentration of [Emim][Br] at atmospheric pressure and T = (298.15, 303.15, 308.15, 313.15, and 318.15) K. The apparent molar volume, isentropic compressibility, apparent isentropic compressibility, and relative viscosity values have been evaluated from the experimental data. The partial molar volume and isentropic compressibility at infinite dilution, and viscosity B-coefficient obtained from these data have been used to calculate the corresponding transfer parameters for the studied IL from water to the aqueous tri-potassium phosphate solutions. Also, an empirical equation was satisfactorily used to correlate the experimental viscosity data.