Synthesis and screening of some novel substituted indoles contained 1,3,4-oxadiazole and 1,2,4-triazole moiety

A series of novel 3-[5-(1H-indol-3-yl-methyl)-2-oxo-[1,3,4]oxadiazol-3-yl]propionitrile(5),3-[4- amino-3-(1H-indol-3-yl-methyl)-5-oxo-4,5-dihydro-[1,2.4]triazol-1-yljpropionitrile(6),3-[5-(1H- indol-3-yl-methyl)-2-thioxo-[1,3,4]oxadiazol-3-yl]propionitrile(7) and 3-[4-amino-3-(1H-indol-3-yl-methyl) -5-thioxo-4,5-dihydro-[1,2,4]triazol-l -yljpropionitrile(8) were synthesized in good yields from the intermediate(1H-indol-3-yl)-acetic acid N’-(2-cyanoethyl)hydrazide(4).The chemical structures of the newly synthesized compounds were elucidated by their IR,~1H NMR and MS.Further,all the compounds were screened for their antimicrobial activity against Gram-positive,Gram-negative bacteria and also tested their ability toward anti-inflammatory activity.     

在线同位素分离器中空阴极靶离子源

本文描述兰州中国科学院近代物理研究所的在线同位素分离器中空气阴极靶离子源的设计原理、结构和特性。对Ar和Xe的调试结果。分离器的分辨本领达到700-1200。满足高分辨的要求。     

200KV重离子加速器及其应用

本文介绍一台采用双潘宁型多电荷重离子源的200kV重离子加速器,简述它在GaP光探测器的研制、聚合物材料和金属材料的离子注入改性等方面的研究与应用。     

New cloud vapor zone (CVZ) coupled headspace solid-phase microextraction technique

A new cloud vapor zone (CVZ)-based headspace solid-phase microextraction (HS-SPME) technique has been demonstrated with the capability of heating the sample matrix and simultaneously cooling the sampling zone. A bi-temperature-controlled (BTC) system, allowing 10 mL of test sample heating and headspace external-cooling, was employed for the CVZ formation around the SPME-fiber sampling area. In the CVZ procedure, the heated headspace vapor undergoes a sudden cooling near the SPME to form a dense cloud of analyte–water vapor, which is helpful for adsorption or absorption of the analyte. The device was evaluated for the quantitative analysis of aqueous chlorothalonil. Parameters influencing sampling efficiency, e.g., SPME fiber coating, SPME sampling temperature and time, solution modifier, addition of salt, sample pH, and temperature, were investigated and optimized thoroughly. The proposed BTC-HS-SPME method afforded a best extraction efficiency of above 94% accuracy (less than 4.1% RSD, n = 7) by using the PDMS fiber to collect chlorothalonil in the headspace at 5 °C under the optimized condition, i.e., heating sample solution (added as 10% ethylene glycol and 30% NaCl, at pH 7.0) at 130 °C for 15 min. The detection was linear from 0.01 to 80 μg L⁻¹ with a regression coefficient of 0.9998 and had a detection limit of 3.0 ng L⁻¹ based on S/N = 3. Practical application was demonstrated by analyzing chlorothalonil in farm water samples with promising results and recoveries. The approach provided a very simple, fast, sensitive, and solvent-free procedure to collect analytes from aqueous solution. The approach can provide a new platform for other sensitive HS-SPME assays.     

Dielectrophoresis and AC-induced assembly in binary colloidal suspensions

Dielectrophoretic behaviors and assembly of a binary suspension in aqueous media are examined in the presence of nonuniform alternating current (AC) electric field. A peculiar low-frequency threshold and dielectrophoresis (DEP) crossover frequency determine the applicable frequency window for binary assembly under positive DEP, which can be effectively tuned by medium conductivity and particle size, suggesting that the dynamic double-layer effect is responsible for the interfacial polarization of micrometer to submicrometer-sized particles in aqueous suspensions. Strong effects of AC-field frequency, medium conductivity, and size ratio on binary assembly morphology have been observed. A frequency-medium conductivity phase diagram is obtained to illustrate the morphological transition of assembled colloidal aggregates from segregated, ordered assemblies to inverted segregation with the appearance of amorphous phases upon increasing frequency and/or medium conductivity, which is a direct consequence of the competition between DEP and hydrodynamic mobility. Significantly, our results demonstrate a rapid method to form hybrid nanostructured materials.     

Substituted tertiary phosphine Ru(II) organometallics: catalytic utility on the hydrolysis of etofibrate in pharmaceuticals

Some new organometallics of ruthenium(II) of the type [RuCl(2)(COD)(CO)L] (1a-f) and [RuCl(2)(COD)L(2)] (2a-f) (where L is substituted tertiary phosphines), have been synthesized by using precursors [RuCl(2)(COD)(CO)(CH(3)CN)] (1) and [RuCl(2)(COD)(CH(3)CN)(2)] (2) with the substituted tertiary phosphine ligands in 1:1 and 1:2 molar ratio. The organometallics (2a-f) have been further reacted with carbonmonoxide to produce compounds of the type [RuCl(2)(CO)L(2)] (3a-f). These compounds were characterized by elemental analysis, IR, NMR ((1)H, (13)C and (31)P), mass and electronic spectral data. The catalytic activity of all these organometallics were studied and found that they are efficient catalysts for hydrolysis of etofibrate. The hydrolyzed product was separated by column chromatography and the percent yields are found in the range of 98.6-99.1%.     

Theoretical studies on polynitrobicyclo[1.1.1]pentanes in search of novel high energy density materials

Bicyclo[1.1.1]pentane is a highly strained hydrocarbon system due to close proximity of nonbonded bridge head carbons. Based on fully optimized molecular geometries at the density functional theory using the B3LYP/6-31G* level, densities, detonation velocities, and pressures for a series of polynitrobicyclo[1.1.1]pentanes, as well as their thermal stabilities were investigated in search for high energy density materials (HEDMs). The designed compounds with more than two nitro groups are characterized by high heat of formation and magnitude correlative with the number and space distance of nitro groups. Density was calculated using the crystal packing calculations and an increase in the number of nitro groups increases the density. The increase in density shows a linear increase in the detonation characteristics. Bond dissociation energy was analyzed to determine thermal stability. Calculations of the bond length and bond dissociation energies of the C-NO₂ bond indicate that this may be the possible trigger bond in the pyrolysis mechanism. 1,2,3-Trinitrobicyclo[1.1.1]pentane (S3), 1,2,3,4-tetranitrobicyclo[1.1.1]pentane (S4), and 1,2,3,4,5-pentanitrobicyclo[1.1.1]pentane (S5) have better energetic characteristics with better stability and insensitivity, and as such may be explored in defense applications as promising candidates of the HEDMs series.     

Determination of ammonium in aqueous samples using new headspace dynamic in-syringe liquid-phase microextraction with in situ derivitazation coupled with liquid chromatography–fluorescence detection

A new simultaneous derivatization and extraction method for the preconcentration of ammonia using new one-step headspace dynamic in-syringe liquid-phase microextraction with in situ derivatization was developed for the trace determination of ammonium in aqueous samples by liquid chromatography with fluorescence detection (LC–FLD). The acceptor phase (as derivatization reagent) containing o-phthaldehyde and sodium sulfite was held within a syringe barrel and immersed in the headspace of sample container. The gaseous ammonia from the alkalized aqueous sample formed a stable isoindole derivative with the acceptor phase inside the syringe barrel through the reciprocated movements of plunger. After derivatization-cum-extraction, the acceptor phase was directly injected into LC–FLD for analysis. Parameters affecting the ammonia evolution and the extraction/derivatization efficiency such as sample matrix, pH, temperature, sampling time, and the composition of derivatization reagent, reaction temperature, and frequency of reciprocated plunger, were studied thoroughly. Results indicated that the maximum extraction efficiency was obtained by using 100 μL derivatization reagent in a 1-mL gastight syringe under 8 reciprocated movements of plunger per min to extract ammonia evolved from a 20 mL alkalized aqueous solution at 70 °C (preheated 4 min) with 380 rpm stirring for 8 min. The detection was linear in the concentration range of 0.625–10 μM with the correlation coefficient of 0.9967 and detection limit of 0.33 μM (5.6 ng mL⁻¹) based on S N⁻¹ = 3. The method was applied successfully to determine ammonium in real water samples without any prior cleanup of the samples, and has been proved to be a simple, sensitive, efficient and cost-effective procedure for trace ammonium determination in aqueous samples.     

Synthesis of some novel 2‐substituted‐N‐aryl‐benzoxazole‐5‐carboxamides using cobalt dipyridine dichloride as a catalyst

An efficient synthesis of some novel 2‐substituted‐N‐aryl‐benzoxazole‐5‐carboxamides from 2‐substituted — 5‐carbomethoxy benzoxazole on treatment with different substituted anilines promoted by cobalt dipyridine dichloride as a catalyst is described. This new approach has the advantage of excellent yields (90%) and short reaction times 1‐2 h.