Solution-processed electrochemical synthesis of ZnFe2O4 photoanode for photoelectrochemical water splitting

Journal of Solid State Electrochemistry - Herein, we report the synthesis of ZnO nanorod films onto FTO (fluorine-doped tin oxide) substrates using the solution-processed electrodeposition method....     

Trash GGBFS-based geopolymer as a novel sunlight-responsive photocatalyst for dye discolouration

In this study, we report a waste material-ground granulated blast furnace slag (GGBFS) as a low cost geopolymer, hybridised with ZnO to form a novel and efficient photocatalyst capable of discolouring textile wastewater. GGBFS is a waste material in an iron industry. Methylene blue was used as the probe dye and natural sunlight was used for activation of the photocatalyst. It was observed that under the experimental conditions, ZnGP-40 exhibited twice the discoloration efficiency than conventionally used ZnO or TiO₂. This enhanced performance is majorly attributed to increased surface area of ZnO when strewn in the GGBFS matrix. The photocatalysts were characterized by SEM, TEM, PSA, TGA, BET and UV–Vis/NIR. The effect of photocatalyst loading, speed of agitation and solar insolation has also been studied. Since this study has been performed in direct sunlight, it exhibits a realizable application of solar energy in the treatment of wastewater.     

Anchoring Mechanism of ZnO Nanoparticles on Graphitic Carbon Nanofiber Surfaces through a Modified Co‐Precipitation Method to Improve Interfacial Contact and Photocatalytic Performance

A facile three‐step co‐precipitation method is developed to synthesize graphitic carbon nanofibers (CNFs) decorated with ZnO nanoparticles (NPs). By interchanging intermediate steps of the reaction processes, two kinds of nanohybrids are fabricated with stark morphological and physicochemical differences. The morphologies differ because of the different chemical environments of the NP/nanocluster formation. The hybrid with larger and non‐uniform ZnO nanocluster size is formed in liquid phase and resulted in considerable interfacial defects that deteriorate the charge‐transfer properties. The hybrid with smaller and uniform ZnO NPs was formed in a dry solid phase and produced near‐defect‐free interfaces, leading to efficient charge transfer for superior photocatalytic performance. The results broaden the understanding of the anchoring/bonding mechanism in ZnO/CNF hybrid formation and may facilitate further development of more effective exfoliation strategies for the preparation of high‐performance composites/hybrids.     

Fluorogenic ratiometric dipodal optode containing imine-amide linkages: Exploiting subtle thorium (IV) ion sensing

The (13E,19E)-N1′,N3′-bis[4-(diethylamino)-2-hydroxybenzylidene]malonohydrazide (L) has been developed for the detection of Th⁴⁺ ions using dual channel signalling system. The UV–vis absorbance and fluorescence spectroscopic data revealed the formation of L–Th⁴⁺ complex in 1:1 equilibrium. The density functional theory (DFT) also confirms the optimum binding cavity for the recognition of metal ion. The binding constant computed from different mathematical models for an assembly of L–Th⁴⁺. The detection limit of L for Th⁴⁺ recognition is to a concentration down to 0.1 μM (0.023 μg g⁻¹). The present sensing system is also successfully applied for the detection of Th⁴⁺ ion present in soil near nuclear atomic plants.     

Comparative Study on Heat Transfer Enhancement of Low Volume Concentration of Al2o3–Water and Carbon Nano-Tube–Water Nano-Fluids in Transition Regime Using Helical Screw Tape Inserts

This study reports the comparison of heat transfer and friction factor characteristics of helical screw inserts in Al₂O₃–water and carbon nano-tube–water nano-fluids through a straight pipe in transition regime with constant heat flux boundary condition. Experiments were carried out by using 0.15% volume concentration of Al₂O₃–water and carbon nano-tube–water nano-fluid with helical tape inserts of twist ratio, TR = 1.5, 2.5, and 3. The thermal performance of helical screw tape inserts with the carbon nano-tube–water nano-fluid is found -to be higher when compared to the Al₂O₃–water nano-fluid. In addition, the maximum enhancement in heat transfer was obtained for the carbon nano-tube–water nano-fluid with helical tape inserts of twist ratio 1.5. The increase in pressure drop of the Al₂O₃–water nano-fluid with helical screw tape inserts is found to be higher compared to the carbon nano-tube–water nano-fluid helical screw tape inserts at lower value of twist ratio.     

Experimental and Theoretical Investigation of the Structural and Opto-electronic Properties of Fe-Doped Lead-Free Cs2AgBiCl6 Double Perovskite

Lead-free double perovskites have emerged as stable and non-toxic alternatives to Pb-halide perovskites. Herein, the synthesis of Fe-doped Cs₂AgBiCl₆ lead-free double perovskites are reported that display blue emission using an antisolvent method. The crystal structure, morphology, optical properties, band structure, and stability of the Fe-doped double perovskites were investigated systematically. Formation of the Fe-doped Cs₂AgBiCl₆ double perovskite is confirmed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. XRD and thermo-gravimetric analysis (TGA) shows that the Cs₂AgBiCl₆ double perovskite has high structural and thermal stability, respectively. Field emission scanning electron microscopy (FE-SEM) analysis revealed the formation of dipyramidal shape Cs₂AgBiCl₆ crystals. Furthermore, energy-dispersive X-ray spectroscopy (EDS) mapping shows the overlapping of Cs, Bi, Ag, Fe, and Cl elements and homogenous incorporation of Fe in Cs₂AgBiCl₆ double perovskite. The Fe-doped Cs₂AgBiCl₆ double perovskite shows a strong absorption at 380 nm. It extends up to 700 nm, suggesting that sub-band gap states transition may originate from the surface defect of the doped perovskite material. The radiative kinetics of the crystals was studied using the time-correlated single-photon counting (TCSPC) technique. Lattice parameters and band gap value of the Fe-doped Cs₂AgBiCl₆ double perovskites predicted by the density functional theory (DFT) calculations are confirmed by XRD and UV/Visible spectroscopy analysis. Time-dependent photo-response characteristics of the Fe-doped Cs₂AgBiCl₆ double perovskite show fast response and recovery time of charge carriers. We believe that the successful incorporation of Fe in lead-free, environmentally friendly Cs₂AgBiCl₆ double perovskite can open a new class of doped double perovskites with significant potential optoelectronics devices fabrication and photocatalytic applications.     

Phosphonium Ionic Liquid: A Novel Catalyst for Benzyl Halide Oxidation

An environmentally friendly ionic liquid is used for the first time in mild and selective oxidation of aryl halides to corresponding aldehydes using iodoxybenzoic acid as oxidizing agent.     

Novel Polycarbonate Copolymer as Organocatalyst for Aldol and Michael Reaction

A new polymeric organocatalyst is prepared by free radical copolymerization of allyl diglycol carbonate (ADC) and Boc-protected allyl prolinate and evaluated as a chiral catalyst for aldol and Michael reaction.