STM/AFM studies of the evolution of morphology of electroplated Ni/W alloys

The surface morphology evolution of Ni/W alloys was studied, as a function of the alloy composition. Using the modified plating baths developed in our laboratory recently, electroplated Ni/W alloys with different W content, in the range of 7–67 atom percent (a/o), can be obtained. This was found to lead to different structures, ranging from polycrystalline fcc-Ni type structure to amorphous, followed by orthorhombic with increasing W content in the alloy. Powder XRD was studied to determine the crystal structures. Ex situ STM, AFM and SEM were used to study in detail the surface morphologies of the different alloys, and their evolution with increasing W content.

The important findings are that a mixture of two crystalline forms can give rise to an amorphous structure. Hillocks that are usually a characteristic of epitaxial growth can also exist in the amorphous alloys. Oriented scratches caused by stress can also be formed.

Up to 20 a/o of W is deposited in the alloys in crystalline form, with the fcc-Ni type structure. Between 20 and about 40 a/o an amorphous structure is observed, and above that an orthorhombic crystal structure is seen, which is characteristic of the NiW binary alloy. Careful choice of the composition of the plating bath allowed us to deposit an alloy containing 67 a/o W, which corresponds to the composition NiW₂.     

Site-to-site peptide transport on a molecular platform using a small-molecule robotic arm

Peptides attached to a cysteine hydrazide ‘transporter module’ are transported selectively in either direction between two chemically similar sites on a molecular platform, enabled by the discovery of new operating methods for a molecular transporter that functions through ratcheting. Substrate repositioning is achieved using a small-molecule robotic arm controlled by a protonation-mediated rotary switch and attachment/release dynamic covalent chemistry. A polar solvent mixtures were found to favour Z to E isomerization of the doubly-protonated switch, transporting cargo in one direction (arbitrarily defined as ‘forward’) in up to 85% yield, while polar solvent mixtures were unexpectedly found to favour E to Z isomerization enabling transport in the reverse (‘backward’) direction in >98% yield. Transport of the substrates proceeded in a matter of hours (compared to 6 days even for simple cargoes with the original system) without the peptides at any time dissociating from the machine nor exchanging with others in the bulk. Under the new operating conditions, key intermediates of the switch are sufficiently stabilized within the macrocycle formed between switch, arm, substrate and platform that they can be identified and structurally characterized by ¹H NMR. The size of the peptide cargo has no significant effect on the rate or efficiency of transport in either direction. The new operating conditions allow detailed physical organic chemistry of the ratcheted transport mechanism to be uncovered, improve efficiency, and enable the transport of more complex cargoes than was previously possible.

Peptides are transported in either direction between chemically similar sites on a molecular platform, substrate repositioning is achieved using a cysteine hydrazide transporter module and a small-molecule robotic arm controlled by a rotary switch.     

Stereochemistry of new nitrogen containing heterocyclic aldehyde. VII. Potentiometric, conductometric and thermodynamic studies of novel quinoline azodyes and their metal complexes with some transition metals

A novel series of quinoline azodyes (5-(4'-derivatives phenyldiazo)-8-hydroxy-7-quinolinecarboxaldehyde)) (HL1-HL5) has been prepared and characterized by elemental analyses, 1H-NMR and IR spectra. The IR spectral data indicate that the compounds can exist in two resonance structures. Proton-ligand dissociation constants of quinoline azodyes and their subsituted derivatives, and metal-ligand stability constants of their complexes with bivalent (Mn2+, Co2+, Ni2+, Cu2+) metal ions have been determined potentiometrically in 0.1 m KCl and 40% (v/v) dimethylformamide (DMF)-water mixture. The influence of substituents on the dissociation and stability constants was examined on the basis of the electron repelling property of the substituent. The order of the stability constants of the formed complexes was found to be Mn2+ < Co2+ < Ni2+ < Cu2+. The effect of temperature was studied and the corresponding thermodynamic parameters (deltaG, deltaH, deltaS) were derived and discussed. The stoichiometries of these complexes were determined conductometrically and indicated the formation of 1:1 and 1:2 (metal:ligand) complexes was indicated.     

Spectral Studies on Some Pyrimidine Derivatives in Different Solvents

The electronic absorption spectra of 2-aminopyrimidine (compound I), 2-amino-4-methylpyrimidine (compound II), 2-amino-4,6-dimethylpyrimidine (compound III), 2-amino-4,6-dimethoxypyrimidine (compound IV), 4-amino-2,6-dimethylpyrimidine (compound V), and 4,5-diamopyrimidine (compound VI) have been measured in water and in a series of different organic solvents. The solvent effects on the spectra are discussed and the solvent induced spectral shifts are analyzed in terms of different solute–solvent interaction mechanisms, using the multiple linear regression technique.     

PHOTOCHEMISTRY OF ALL-TRANS- AND 13-CIS-14,15-DIDEUTERIORETINAL

Abstract— All- trans - and 13- cis -14,15-dideuterioretinal were synthesized and their solution photochemistry examined. Quantum yields of trans → cis or cis → trans photoisomerization and the number and ratio of primary photoproducts, determined by high pressure liquid chromatographic analysis, are essentially identical to that of their corresponding retinal isomer. The C-14, C-15 carbon-hydrogen modes play no particularly important role in the deactivation of electronically excited linear polyenes related to retinal.     

On the structure of nonarchimedean exponential fields I

Given an ordered fieldK, we compute the natural valuation and skeleton of the ordered multiplicative group (K ^>0, ·, 1, <) in terms of those of the ordered additive group (K,+,0,<). We use this computation to provide necessary and sufficient conditions on the value groupv(K) and residue field , for theL -equivalence of the above mentioned groups. We then apply the results to exponential fields, and describev(K) in that case. Finally, ifK is countable or a power series field, we derive necessary and sufficient conditions onv(K) and forK to be exponential. In the countable case, we get a structure theorem forv(K).This paper represents some results of the author's doctoral thesisThis paper was written while the author was supported by a research grant from the University of Heidelberg     

The effect of implementation of the ISO 9000 on customer complaints; a 5-year follow-up study in a regional laboratory.

Although the importance of quality management in the medical laboratory has been emphasized, we are unaware of any interventional studies demonstrating benefits of implementation of recommendations of the International Standards Organization (ISO). In the following 5-year follow-up study, we implemented quality management as stipulated by the ISO, received a certificate of approval, and determined how the program affected customer complaints. From 1997 to 2001 there was only a slight decrease in the number of customer complaints, but a significant continuing downward trend in the proportion of justified complaints (chi-squared test, p<0.001). In fact in 2001 the proportion of justified complaints had decreased by nearly 80% (relative risk, 0.22; 95% confidence interval, 0.09–0.52)), to only 10.9% of the total complaints. We conclude that the use of the ISO 9000 along with good laboratory practice resulted in a significant decrease in the proportion of justified complaints.     

Combined application of INAA and PIXE for studying the regional aerosol composition in Southern Africa

As part of the SAFARI-92 biomass buming experiment, aerosol collections were carried out with several size-fractionating sampling devices at a number of sites in Southern Africa. One of the samplers used at all ground-based sites was a stacked filter unit (SFU). The SFU samples were analyzed by both INAA and PIXE analysis. The present paper gives an intercomparison of the analytical results obtained in order to assess the accuracy and to check the quality assurance of the analytical procedures. Twenty-one common elements were determined by both INAA and PIXE. Concentrations of 13 elements (i.e., Na, Mg, Al, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Zn and Br) were generally measured with sufficient precision in both techniques for performing the intercomparison. The INAA and PIXE data were compared in terms of PIXE/INAA concentration ratios on a sample by sample basis for the coarse and fine size fraction separately. the atmospheric concentrations for K, Mn and Fe agreed within 5–10%, the agreement between the data for the other common elements was typically better than 15%. Possible explanations for lower than 1.0 ratios for Cl, Br and Na are presented. The common elements were classified into groups according to their detectability and sensitivity in each technique.     

A sequential injection spectrophotometric method for the determination of penicillamine in pharmaceutical products by complexation with iron(III) in acidic media

A simple, robust and sensitive sequential injection spectrophotometric method for the assay of penicillamine (PA) in pharmaceutical formulations is developed. The method was based on the complex formation when PA is reacted with iron(III) solution in hydrochloric acid media. The deep blue colored PA-iron(III) complex produced is monitored at a maximum wavelength of 600 nm. A five level orthogonal array design coupled to genetic algorithm was employed to obtain the optimum experimental conditions for the determination of PA using peak absorbance as the measure of the system's performance criterion. A linear dynamic range for the determination of PA of 25-300 ppm was obtained with a sampling frequency of 50 h⁻¹ and a relative standard deviation of less than 0.98%. The method was successfully applied to the determination of PA in pharmaceutical formulations.     

Ketalizations of aryl ω-(2-imidazolyl)alkyl ketones by glycerol and 3-mercapto-1,2-propanediol. synthesis and characterization of cis- and trans-{2-aryl-2-[ω-(2-imidazolyl)alkyl](1,3-dioxolan-4-yl and 1,3-oxathiolan-5-yl)}methanols

Aryl 2-[(2-imidazolyl)ethyl or 3-(2-imidazolyl)propyl]ketones were ketalized by glycerol or 3-mercapto-1,2-propanediol in boiling benzene in the presence of 4-toluenesulfonic acid to provide the title compounds. The aryl substituents are 4-chloro-, 4-bromo-, 4-fluoro-, or 2,4-dichlorophenyl. While aryl (2-imidazolyl)methyl ketones condensed with glycerol to form cis- and trans-{2-aryl-2-[(2-imidazolyl)methyl]-4-(hydroxymethyl)}-1,3-dioxolanes, related condensations with 3-mercapto-1,2-propanediol, under similar, or even more stringent reaction conditions, produced no 1,3-oxathiolane analogs, with the starting ketones being recovered. Separation and structure determination of these racemic cis and trans isomeric products are described. The structure of these stereoisomers was established by means of ¹H and ¹³C nmr correlation and nOe experiments. Selective methylation of the N-unsubstituted 2-imidazolyl alcohols with one equivalent sodium hydride and methyl iodide provided the corresponding N-methyl alcohols in excellent yields. With excess benzoyl chloride, N-unsubstituted 2-imidazolyl alcohols were initially converted to O, N-dibenzoates from which the N-benzoyl group was easily cleaved by ammonium hydroxide in ethanol to provide benzoate esters.