Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

In the present work, the use of cylindrical turbulators in a double pipe heat exchanger has been investigated. Cylindrical fin type of turbulators has been placed circumferentially separated by 90° on the outer side of an inner pipe at a regular pitch. Experimental studies were undertaken for different air flow rates in a turbulent regime whose Reynolds number range between 2500 and 10000. Heat transfer characteristics like Nu and friction factor have been experimentally determined. Parametric studies were conducted by changing the pitch and also the orientation of the turbulators. Nu and friction factor were found to increase as the pitch is reduced. A model with alternatively changed orientation outperformed others by exhibiting highest Nu and reduced friction factor.     

新型菲涅尔线聚光太阳电池组件特性分析

以PMMA为材料,采用热压成型工艺加工线聚焦菲涅尔聚光棱镜,对在其聚光条件下不同入射角度情况下太阳电池的电流电压特性进行测试,结果表明:该菲涅尔线聚焦棱镜能有效提高太阳电池的单位输出功率,而且具有比较宽泛的集光角的特性,基本满足实际应用的要求.     

X波段介质和金属膜片混合加载行波加速结构的传播特性计算及模型腔的有关研究

计算了X波段(f=9.37GHz)介质和金属膜片混合加载行波加速结构的TM₀₁模和HEM₁₁模的色散曲线, 结果表明HEM₁₁模的截止频率比TM₀₁模的低, 说明与盘荷波导相比, 该种新加速结构单束团的BBU效应得到改善.实验研究优选得到了适用于该种新加速结构的介质(ε_r=5.812). 采用MAFIA程序优化设计了模型腔, 测试频率与设计的数值吻合得很好.     

新型菲涅尔线聚焦聚光太阳电池组件研究

以聚甲基丙烯酸甲脂为材料,采用热压成型工艺加工成型线聚焦菲涅尔聚光透镜(8×),可用于空间、地面光伏系统太阳电池组件的聚光系统,并对在其聚光条件下,太阳电池的电流电压特性进行测试,结果表明,该菲涅尔线聚焦棱镜能有效提高太阳电池的单位输出功率.模具的机械加工精度和光学抛光精度低,是造成其部分聚光率损失的原因.     

Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

尿素酶固载于纳米二氧化钛多孔膜上的尿素生物传感器

在钛丝基体上沉积一层纳米二氧化钛(TiO2)多孔膜,然后直接将尿素酶吸附在TiO2膜上。基于TiO2膜的pH响应,发展了一种廉价的、易于微型化的pH敏尿素酶传感器。采用石英微天平、红外光谱和紫外可见光谱等手段研究尿素酶在TiO2膜上的物理固载行为。由于纳米TiO2在紫外光下光自洁特性可获得高度洁净的表面,石英微天平研究表明在光自洁后的TiO2膜上尿素酶的吸附具有很好的重复性和稳定性,吸附量为0.22mmol/g,吸附平衡常数k为3.15×105L/mol。采用电位法测定了尿素酶/TiO2复合膜电极的性能及其影响因素,在1.0 mmol/L pH 7~8 PBS,35℃,尿素的响应范围为8.5×10-5~1.5×10-1mol/L,相关系数r为0.993 7,检出限为6×10-5mol/L。     

钙黄绿素蓝荧光法测定食品中的微量锌（Ⅱ）

本文研究了在ＣＴＭＡＢ存在下，用钙黄绿素蓝荧光法测定食品中的微量锌（Ⅱ）的实验条件。在本实验条件下，Ｚｎ（Ⅱ）与钙黄绿素蓝生成１：１的配合物使钙黄绿素蓝的荧光增强，最大激发波长和最大发射波长分别为３５３ｎｍ和４４０ｎｍ。     

胆红素在纳米TiO2膜上的吸附行为研究

采用石英晶体微天平现场技术,研究了胆红素在纳米TiO2表面的吸附动力学行为,并考察了溶液pH、硅烷亲脂性试剂及金属离子修饰的纳米TiO2对胆红素吸附的影响。结果表明,胆红素在纳米TiO2表面的吸附平衡常数K为2·0×106L/mol;由于亲水性纳米TiO2表面的羟基和胆红素分子中的羧基发生作用,胆红素吸附量随溶液pH增大而增大;但经过硅烷试剂亲脂性修饰后,吸附量随pH增大而下降;经过金属离子修饰后,改变了TiO2表面电荷导致吸附量增加,且吸附量随金属离子电荷增加而增加,当金属离子所带电荷相同时,吸附量基本相同。