Synthesis and studies on metal coordination with a novel carboxyamide ligand

Novel complexes of Co(II), Ni(II), Cu(II) and Pd(II) with the new ligand [N,N'-bis(2-carboxy-1-oxo-phenelenyl)ethylenediamine] (H2L) have been synthesized and characterized on the basis of elemental analyses, magnetic susceptibility, thermal, infrared, electronic, 1H NMR and EPR spectral studies. Infrared and 1H NMR spectra show that H2L acts as a binegative tetradentate ligand. Coordination occurs through deprotonated carboxylate oxygens and nondeprotonated amido nitrogens in all the complexes. Electronic spectral studies and magnetic moment values suggest N2O2 coordination around each metal centre with strong field square planar chromophores. The probable structures of the complexes have been assigned on the basis of spectral studies. The complex formation between M(II) [M(II) = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)] and (L2-) has also been studied potentiometrically in 75% aqueous DMF at 25 degrees C in 0.1 M NaClO4. The stability constants were found to follow the order: Mn(II) < Co(II) < Ni(II) < Cu(II) > Zn(II).     

CFD evaluation of drop retraction methods for the measurement of interfacial tension of surfactant-laden drops

Drop retraction methods are popular means of measuring the interfacial tension between immiscible polymers. Experiments show that two different drop retraction methods, imbedded fiber retraction (IFR) and deformed drop retraction (DDR), give inconsistent results when a surfactant is present on the surface of the drop. These inconsistencies are deemed to be due to dilution of the surfactant and due to gradients in interfacial concentration of surfactant along the drop surface. This physical picture is quantified for the simple case of a Newtonian drop in a Newtonian matrix, with an insoluble, nondiffusive surfactant at the interface. The drop is deformed in computational fluid dynamics simulations by shearing the matrix, and then allowed to retract. Dilution and interfacial tension gradients effects are found to be especially large at the early stages of retraction, making IFR unsuitable for measuring the interfacial tension of surfactant-laden interfaces. The effects of surfactant dilution and gradients are found to persist even at late stages of retraction, causing the DDR method to underestimate the equilibrium interfacial tension significantly. The largest underestimates occur when the drop viscosity is lower than the matrix viscosity.     

Tandem and chemoselective synthesis of benzil derivatives from styrene and arene diazonium salts

A facile and practically applied protocol for synthesis of benzil derivatives using styrene and arene diazonium salts is reported. Pd(OAc)₂/SeO₂ catalytic system was found to be efficient for chemoselective synthesis of benzil. Selenium dioxide works well as an oxidant under milder reaction conditions. Moderate to very good yields of the desired products were obtained.     

DNA interaction,cytotoxicity and molecular structure of cobalt complex of 4‐amino‐N‐(6‐chloropyridazin‐3‐yl)benzene sulfonamide in the presence of secondary ligand pyridine

Novel cobalt complex of 4‐amino‐N‐(6‐chloropyridazin‐3‐yl)benzene sulfonamide (sulfachloropyridazine) has been synthesized and characterized by elemental analysis, FT‐IR spectroscopy and magnetic susceptibility (VSM). Cobalt complex of Sulfachloropyridazine (Co‐SCP) crystallized in monoclinic space group P2₁/n with Z = 4. The structure is solved by direct method and refined to R = 0.099 for 4720 reflections with I ?4σ(I). The results of FT‐IR spectra suggest the binding of cobalt atom to the sulfonamide ligand which is in agreement with the crystal structure determination. In crystal structure, molecule is linked via, C‐H … π, C‐Cl … π and π … π intermolecular interactions. The computational studies like the optimization energy and root means square deviation compare with single crystal structure, frontier molecular orbital (Homo‐Lumo energy) and binding energy of the Co‐SCP has been carried out using DFT/B3LYP level of theory in gaseous phase. Hirshfeld surfaces and the 2D‐fingerprint analysis are performed to study the nature of interactions and their measurable contributions towards crystal packing. The interaction of the complex with DNA is investigated using viscosity measurement and absorption titration studies. The result shows the complex bind to DNA with intercalative mode with high DNA‐binding constant (K_b). Also, in vivo and in vitro cytotoxic studies are performed using S. pombe cells and brine shrimp lethality bioassay. DNA‐cleavage study shows better cleaving ability of the complex.     

Design and Synthesis of Aromatic Polyesters Bearing Pendant Clickable Maleimide Groups

A bisphenol bearing pendant maleimide group, namely, N‐maleimidoethyl‐3, 3‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrrolidone (PPH‐MA) was synthesized starting from phenolphthalein. Aromatic (co)polyesters bearing pendant maleimide groups were synthesized from PPH‐MA and aromatic diacid chlorides, namely, isophthaloyl chloride (IPC), terephthaloyl chloride (TPC), and 50:50 mol % mixture of IPC and TPC by low temperature solution polycondensation technique. Copolyesters were also synthesized by polycondensation of different molar proportions of PPH‐MA and bisphenol A with IPC. Inherent viscosities and number‐average molecular weights of aromatic (co)polyesters were in the range of 0.52–0.97 dL/g and 20,200–32,800 g/mol, respectively indicating formation of medium to reasonably high‐molecular‐weight polymers. ¹³C NMR spectral analysis of copolyesters revealed the formation of random copolymers. The 10% weight loss temperature of (co)polyesters was found in the range 470–484 °C, indicating their good thermal stability. A selected aromatic polyester bearing pendant maleimide groups was chemically modified via thiol‐maleimide Michael addition reaction with two representative thiol compounds, namely, 4‐chlorothiophenol and 1‐adamantanethiol to yield post‐modified polymers in a quantitative manner. Additionally, it was demonstrated that polyester containing pendant maleimide groups could be used to form insoluble crosslinked gel in the presence of a multifunctional thiol crosslinker. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 630–640     

Synthesis and characterization of ETS-10: supported hollow carbon nano-polyhedrons nanosorbent for adsorption of krypton at near ambient temperatures

Hollow carbon nano-polyhedrons (HCNPHs) supported on Engelhard Titanosilicate-10 (ETS-10) were synthesized by wet impregnation technique using tetrahydrofuran as a solvent. Synthesized HCNPHs/ETS-10 nanosorbent was characterized by X-ray diffraction, Raman spectra, N₂-adsorption–desorption isotherm, BET surface area, and scanning electron microscopy to confirm the morphology and uniformity of carbon particles ranging from 50 to 70 nm in diameter. Sorption characteristics of this nanosorbent for krypton at various carbon loadings were determined using a bench-scale column apparatus. The dynamic sorption capacity of HCNPHs/ETS-10 nanosorbent calculated from the breakthrough curve, 0.75 mmol/kg, which was ~15 % higher than for that of activated carbon. The effect of temperature on the adsorption capacity was studied between 263–293 K. Operational capacity of the nanosorbent was found to be 0.45 mmol/kg at 263 K. The experimental results indicate that 10 wt% HCNPHs/ETS-10 nanosorbent showed promising results for krypton adsorption, indicating its potential as an economical and active sorbent for krypton removal from the off-gas streams resulting from operations for recycle of used nuclear fuel.     

Ensuring robustness in the quality of antibiotic susceptibility test discs for four novel antibiotics

Antibiotic susceptibility test (AST) discs are used as an in-vitro diagnostic tool to select the appropriate antibiotic to treat an infection. Generally, the concentration of the drug loaded on to the AST discs is measured by studying its activity against quality control organisms. This methodology has several limitations—it is time consuming, requires trained manpower, has a wider acceptance criteria of zone of inhibitions—causing ambiguity in judging smaller variations in drug concentration. To overcome these issues, we have developed and validated high-performance liquid chromatographic (HPLC) methods for the determination of strength of AST discs for in-house researched antibiotics, namely Levonadifloxacin/WCK 771, Nafithromycin/WCK 4873, Cefepime-Tazobactam/WCK 4282, and Cefepime-Zidebactam/WCK 5222. The drugs were extracted from the AST discs using an appropriate solvent. The developed methods are simple, accurate, precise, reproducible, rugged, and robust. They are efficient in terms of time, and can be easily conducted in a quality control laboratory during release as well as stability evaluation of AST disc. Application of HPLC methods for the determination of strength of AST discs ensures flawless quality and, consequently, a better selection of drugs to treat bacterial infections in clinics.     

Solution-processed electrochemical synthesis of ZnFe2O4 photoanode for photoelectrochemical water splitting

Journal of Solid State Electrochemistry - Herein, we report the synthesis of ZnO nanorod films onto FTO (fluorine-doped tin oxide) substrates using the solution-processed electrodeposition method....     

Exceptionally Plastic/Elastic Organic Crystals of a Naphthalidenimine-Boron Complex Show Flexible Optical Waveguide Properties

The design of molecular compounds that exhibit flexibility is an emerging area of research. Although a fair amount of success has been achieved in the design of plastic or elastic crystals, realizing multidimensional plastic and elastic bending remains challenging. We report herein a naphthalidenimine–boron complex that showed size-dependent dual mechanical bending behavior whereas its parent Schiff base was brittle. Detailed crystallographic and spectroscopic analysis revealed the importance of boron in imparting the interesting mechanical properties. Furthermore, the luminescence of the molecule was turned-on subsequent to boron complexation, thereby allowing it to be explored for multimode optical waveguide applications. Our in-depth study of the size-dependent plastic and elastic bending of the crystals thus provides important insights in molecular engineering and could act as a platform for the development of future smart flexible materials for optoelectronic applications.