Synthesis,crystal structure and studies on the interaction with albumin of a new silver(I) complex based on 2‐(4‐nitrobenzenesulfonamido)benzoic acid

In the present work, the two‐dimensional (2D) polymer poly[[μ₄‐2‐(4‐nitrobenzenesulfonamido)benzoato‐κ⁴O¹:O¹:O^1′:N⁶]silver(I)] (AgL), [Ag(C₁₃H₉N₂O₆S)]_n, was obtained from 2‐(4‐nitrobenzenesulfonamido)benzoic acid (HL), C₁₃H₁₀N₂O₆S. FT–IR, ¹H and ¹³C{¹H} NMR spectroscopic analyses were used to characterize both compounds. The crystal structures of HL and AgL were determined by single‐crystal X‐ray diffraction. In the structure of HL, O—H…O hydrogen bonds between neighbouring molecules result in the formation of dimers, while the silver(I) complex shows polymerization associated with the O atoms of three distinct deprotonated ligands (L^?). Thus, the structure of the Ag complex can be considered as a coordination polymer consisting of a one‐dimensional linear chain, constructed by carboxylate bridging groups, running parallel to the b axis. Neighbouring polymeric chains are further bridged by Ag—C monohapto contacts, resulting in a 2D framework. Fingerprint analysis of the Hirshfeld surfaces show that O…H/H…O hydrogen bonds are responsible for the most significant contacts in the crystal packing of HL and AgL, followed by the H…H and O…C/C…O interactions. The Ag…Ag, Ag…O/O…Ag and Ag…C/C…Ag interactions in the Hirshfeld surface represent 12.1% of the total interactions in the crystal packing. Studies of the interactions of the compounds with human serum albumin (HSA) indicated that both HL and AgL interact with HSA.     

Synthesis,Crystal Structure,and DNA‐Binding Properties of a New Cd(II) Complex Involving 2‐(2‐1H‐Imidazolyl)‐1H‐Imdazolium Ligand

A new Cd(II) complex of Cd(H₃biim)₂(NCS)₂Cl₂ [H₃biim=2‐(2‐1H‐imidazolyl)‐1H‐imidazolium] was synthesized and characterized by elemental analyses, FT‐IR and X‐ray single crystal diffraction. In the X‐ray crystallography structure, the cadmium(II) ion is coordinated by two nitrogen atoms of two 2‐(2‐1H‐imidazolyl)‐ 1H‐imdazolium, two nitrogen atoms of two thiocyanate ions and two Cl^?. The interaction of the complex with calf thymus DNA was investigated through electronic absorption spectroscopy, fluorescence spectroscopy, viscosity measurement, cyclic voltammetry and gel electrophoresis. These results show that the Cd(II) complex can electrostatically bind to the phosphate group of DNA backbone. Interestingly, we found that the complex can cleave the pBR322 DNA at pH=7.2 and 37°C.     

Synthesis,structural characterization and computational studies of catena‐poly[chlorido[μ3‐(pyridin‐1‐ium‐3‐yl)phosphonato‐κ3O:O′:O′′]zinc(II)]

Coordination polymers are constructed from two basic components, namely metal ions, or metal‐ion clusters, and bridging organic ligands. Their structures may also contain other auxiliary components, such as blocking ligands, counter‐ions and nonbonding guest or template molecules. The choice or design of a suitable linker is essential. The new title zinc(II) coordination polymer, [Zn(C₅H₅NO₃P)Cl]_n , has been hydrothermally synthesized and structurally characterized by single‐crystal X‐ray diffraction and vibrational spectroscopy (FT–IR and FT–Raman). Additionally, computational methods have been applied to derive quantitative information about interactions present in the solid state. The compound crystallizes in the monoclinic space group C 2/c . The four‐coordinated Zn^II cation is in a distorted tetrahedral environment, formed by three phosphonate O atoms from three different (pyridin‐1‐ium‐3‐yl)phosphonate ligands and one chloride anion. The Zn^II ions are extended by phosphonate ligands to generate a ladder chain along the [001] direction. Adjacent ladders are held together via N—H…O hydrogen bonds and offset face‐to‐face π–π stacking interactions, forming a three‐dimensional supramolecular network with channels. As calculated, the interaction energy between the neighbouring ladders is −115.2 kJ mol⁻¹. In turn, the cohesive energy evaluated per asymmetric unit‐equivalent fragment of a polymeric chain in the crystal structure is −205.4 kJ mol⁻¹. This latter value reflects the numerous hydrogen bonds stabilizing the three‐dimensional packing of the coordination chains.     

1,2,4‐Triazol‐3‐ylidenes with an N‐2,4‐Dinitrophenyl Substituent as Strongly π‐Accepting N‐Heterocyclic Carbenes

The synthesis and characterisation of a series of new Rh and Au complexes bearing 1,2,4‐triazol‐3‐ylidenes with a N‐2,4‐dinitrophenyl (N‐DNP) substituent are described. IR, NMR, single‐crystal X‐ray diffraction and computational analyses of the Rh complexes revealed that the N‐heterocyclic carbenes (NHCs) behaved as strong π acceptors and weak σ donors. In particular, a natural bond orbital (NBO) analysis revealed that the contributions of the Rh→C_carbene π backbonding interaction energies (ΔE_bb) to the bond dissociation energies (BDE) of the Rh? C_carbene bond for [RhCl(NHC)(cod)] (cod=1,5‐cyclooctadiene) reached up to 63 %. The Au complex exhibited superior catalytic activity in the intermolecular hydroalkoxylation of cyclohexene with 2‐methoxyethanol. The NBO analysis suggested that the high catalytic activity of the Au^I complex resulted from the enhanced π acidity of the Au atom.     

X‐ray and DFT‐calculated structures of bis[N‐(quinolin‐8‐yl)benzamidato‐κ2N,N′]copper(II)

The application of transition metal chelates as chemotherapeutic agents has the advantage that they can be used as a scaffold around which ligands with DNA recognition elements can be anchored. The facile substitution of these components allows for the DNA recognition and binding properties of the metal chelates to be tuned. Copper is a particularly interesting choice for the development of novel metallodrugs as it is an endogenous metal and is therefore less toxic than other transition metals. The title compound, [Cu(C₁₆H₁₁N₂O)₂], was synthesized by reacting N‐(quinolin‐8‐yl)benzamide and the metal in a 2:1 ratio. Ligand coordination required deprotonation of the amide N—H group and the isolated complex is therefore neutral. The metal ion adopts a flattened tetrahedral coordination geometry with the ligands in a pseudo‐trans configuration. The free rotation afforded by the formal single bond between the amide group and phenyl ring allows the phenyl rings to rotate out‐of‐plane, thus alleviating nonbonded repulsion between the phenyl rings and the quinolyl groups within the complex. Weak C—H…O interactions stabilize a dimer in the solid state. Density functional theory (DFT) simulations at the PBE/6‐311G(dp) level of theory show that the solid‐state structure (C1 symmetry) is 79.33 kJ mol⁻¹ higher in energy than the lowest energy gas‐phase structure (C2 symmetry). Natural bond orbital (NBO) analysis offers an explanation for the formation of the C—H…O interactions in electrostatic terms, but the stabilizing effect is insufficient to support the dimer in the gas phase.     

A novel tetraphenylethylene derivative: 4‐methyl‐N‐[3‐(1,2,2‐triphenylethenyl)phenyl]benzenesulfonamide with aggregation‐induced emission

The novel tetraphenylethylene derivative 4‐methyl‐N‐[3‐(1,2,2‐triphenylethenyl)phenyl]benzenesulfonamide (abbreviated as MTBF), C₃₃H₂₇NO₂S, was synthesized successfully and characterized by single‐crystal X‐ray diffraction, high‐resolution mass spectroscopy and ¹H NMR spectroscopy. MTBF crystallizes in the centrosymmetric monoclinic space group P2₁/c. In the crystal structure, the MTBF molecules are connected into a one‐dimensional band and then a two‐dimensional sheet by hydrogen bonds of the N—H…O and C—H…O types. The sheets are further linked to produce a three‐dimensional network via C—H…π interactions. The molecules aggregate via these intermolecular forces, which restrain the intramolecular motions (RIM) and decrease the energy loss in the aggregation state, so as to open the radiative channels, and thus MTBF exhibits excellent fluorescence by aggregation‐induced emission (AIE) enhancement.     

Mononuclear vs. binuclear carboxylates of copper(II) with 2,2′‐bipyridine: Synthesis,characterization, structural description,and properties

Two new copper(II) carboxylate complexes with 2,2′‐bipyridine and para‐nitrophenyl acetate (complex 1 ) and phenyl acetate (complex 2 ) have been synthesized; isolated in quantitative yield; and characterized using fourier‐transform infrared spectroscopy (FT‐IR), electron paramagnetic resonance, absorption spectroscopy, electrochemistry, and powder and single crystal X‐ray diffraction (XRD) techniques. Being mononuclear, the geometry around copper in complex 1 is a Jahn–Teller distorted octahedral, while complex 2 is binuclear with slightly distorted square pyramidal geometry around both copper ions. Powder XRD indicated several peaks in spectra of both complexes, which coincided with their theoretical spectra. FT‐IR results of the carboxylate stretching frequency were in accordance with the single crystal structure data. Electron paramagnetic resonance spectra of complexes 1 and 2 yielded g_┴ values of 2.06161 and 2.24623 and 1.94959, respectively, indicating a localized electron in b₁ (d _x²_–y²‐orbital). Ultra‐violet (UV)–visible spectroscopy and electrochemistry helped in characterization, as well as in deoxyribonucleic acid (DNA)‐binding ability of the complexes, yielding DNA‐binding constant values = 1.351 × 10⁴ and 1.361 × 10⁴ and 1.820 × 10⁴ and 2.426 × 10⁴ M^?1, respectively, for complexes 1 and 2 . The complexes demonstrate good biological potential.     

Synthesis,characterization and biological properties of mixed ligand complexes of cobalt(II/III) valproate with 2,9‐dimethyl‐1,10‐phenanthroline and 1,10‐phenanthroline

The synthesis of mononuclear cobalt(II/III) complexes with two different ligands (complex 2: [Co(valp)₂(2,9‐dmp)] and complex 3: [Co(valp)₂(H₂O)(1,10‐phen)]) was investigated and the characterization of both complexes was achieved using IR, UV–Vis, and single crystal X‐ray diffraction. Using single crystal X‐ray diffraction, the crystal structure of each of the complexes was determined. Additionally, the biological activity of these complexes was studied in five gram‐positive and four gram‐negative bacterial strains. Whereas in all gram‐negative bacteria tested, cobalt valproate complexes did not show any anti‐bacterial activity, both complexes had effects on gram positive bacteria. Complex 2 demonstrated good anti‐bacterial activity against all gram‐positive bacteria with inhibition zone diameter (IZD) ranging between 15–28 mm. Complex 3 exhibited low inhibition activity against all gram‐positive bacteria except E. faecalis with IZD ranging between 11.3–13.7 mm. Moreover, as an indication of its uses as industrial catalyst, the rate of bis(p‐nitrophenyl) phosphate (BNPP) hydrolysis when catalyzed by these complexes was measured at different temperatures, concentrations and pH. Complex 2 proved to be a better catalyst to induce the hydrolysis of BNPP.     

Synthesis,characterization and biological evaluation of a cobalt(II) complex with 5‐chloro‐8‐hydroxyquinoline as anticancer agent

A new cobalt(II) complex ( 1 ) of 5‐chloro‐8‐hydroxyquinoline was prepared and structurally characterized using infrared spectroscopy, electrospray ionization mass spectrometry, elemental analysis, single‐crystal X‐ray diffraction as well as powder X‐ray diffraction. Its biological activities including DNA binding and anticancer activity were investigated. The DNA binding study of complex 1 suggested that it interacted with calf thymus DNA mainly via an intercalative binding mode. The in vitro anticancer activity of complex 1 was screened against a series of tumor cell lines as well as the normal liver cell line HL‐7702 using MTT assay. complex 1 showed much higher cytotoxicity than corresponding metal salt and ligand towards the five tested tumor cell lines, in which T‐24 was the most sensitive tumor cell line towards 1, with IC₅₀ value of 7.04 ± 0.06 μM. complex 1 was found to greatly induce cell cycle arrest in T‐24 cells at S phase, and consequently to induce cell apoptosis in a dose‐dependent mode suggested by cell apoptosis analysis via Hoechst 33258 and acridine orange/ethidium bromide staining assays. The cell apoptosis mechanism of 1 was studied targeting the mitochondrion‐mediated pathway, since the apoptotic mechanism in the T‐24 cells treated by 1 was investigated by reactive oxygen species (ROS) detection, intracellular calcium concentration measurement and caspase‐9/3 activity assay. The results suggested that the cell apoptosis induced by 1 was closely related to the loss of mitochondrial membrane potential, ROS production and enhancement of intracellular [Ca²⁺], which would trigger the caspase‐9/3 activation via a mitochondrial dysfunction pathway. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,Structure, and Solution Study of a Mercury(II) Complex with the Ligand [1‐(2‐Methoxyphenyl)‐3‐(4‐chlorophenyl)]triazene

The title ligand, [1‐(2‐methoxyphenyl)‐3‐(4‐chlorophenyl)]triazene, H L ( 1 ), was prepared. In a reaction with Hg(NO₃)₂ it forms the complex [Hg(C₂₆H₂₂Cl₂N₆O₂)], [Hg L ₂] ( 2 ). Both compounds were characterized by means of X‐ray crystallography, CHN analysis, FT‐IR, ¹H NMR, and ¹³C NMR spectroscopy. In the structure of compound 1 , two independent fragments are present in the unit cell. They exhibit trans arrangement about the –N=N– double bond. The dihedral angles between two benzene rings in both fragments are 4.36 and 18.79 Å, respectively. Non‐classic C–H ··· N hydrogen bonding and C–H ··· π interactions form a layer structure along the crystallographic ab plane [110]. In compound 2 , the Hg^II atom is hexacoordinated by two tridentate [1‐(2‐methoxyphenyl)‐3‐(4‐chlorophenyl)]triazenide ligands through a N₂O₂ set. In addition, in the structure of 2 , monomeric complexes are connected to each other by C–H ··· π stacking interactions, resulting in a 2D architecture. These C–H ··· π edge‐to‐face interactions are present with H ··· π distances of 3.156 and 3.027 Å. The results of studies of the stoichiometry and formation of complex 2 in methanol solution were found to support its solid state stoichiometry.     

Structure and Magnetic Properties of A μ‐Phenoxido‐bridged Dinuclear Cobalt(II) Complex

A new dinuclear cobalt(II) complex [Co₂L₂Cl₂(CH₃OH)₂] ( 1 ), where HL = 3‐[(furan‐2‐ylmethylimino)methyl]‐2‐hydroxy‐5‐methylbenzaldehyde, derived from the in situ condensation of 2,6‐diformyl‐4‐methylphenol with furfurylamine, was prepared and structurally and magnetically characterized. Single crystal X‐ray structural determination reveals that the structure consists of centrosymmetric dinuclear units with each Co^II ion in a slightly distorted octahedral environment. Lines’ model, which in principle can theoretically separate in spin‐only and orbital contribution, was used to fit the variable temperature susceptibility (2–300 K), suggesting an intramolecular antiferromagnetic interaction between the cobalt(II) ions.     

Synthesis and structure of a new ternary monocopper(II) complex containing mixed ligands of 2,2′‐diamino‐4,4′‐bithiazole and picrate: in vitro anticancer activity,molecular docking and reactivity towards DNA

A new ternary monocopper(II) complex with co‐ligands of 2,2′‐diamino‐4,4′‐bithiazole (dabt) and picrate (pic), namely [Cu(dabt)(pic)₂], has been synthesized and characterized using elemental analyses, molar conductance measurements, infrared and electronic spectral studies and single‐crystal X‐ray diffraction. The crystal structure analyses revealed that the copper(II) ion has a {CuN₂O₄} distorted octahedral coordination environment. The hydrogen bonding interactions contribute to a three‐dimensional supramolecular structure in the crystal. The reactivity towards herring sperm DNA showed that the copper(II) complex can interact with DNA in the mode of intercalation. The molecular docking of the complex with DNA sequence d(ACCGACGTCGGT)₂ demonstrated that the copper(II) complex is stabilized by hydrogen bonding interaction. The in vitro anticancer activities suggested that the copper(II) complex is active against selected tumor cell lines. The effects of the two co‐ligands in the copper(II) complex on DNA‐binding events and in vitro anticancer activity are preliminarily discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,crystal structure,spectral characterization,and DFT studies on 4‐((1‐phenyl‐1H‐tetrazol‐5‐ylthio)methyl)benzoic acid

A new thiotetrazole compound, 4‐((1‐phenyl‐1H‐tetrazol‐5‐ylthio)methyl) benzoic acid ( 1 ), has been synthesized and characterized by elemental analysis, ¹H and ¹³C NMR, ESI‐MS, FT‐IR, UV–vis, fluorescence spectra, and single‐crystal X‐ray diffraction analysis. The structural analysis reveals that compound 1 adopts a nonplanar geometric structure and exhibits an extensive but not uniform π delocalization with all members of the tetrazolyl ring and the exocyclic sulfur atom. A density functional theory (DFT) calculation at B3LYP/6‐31G** level of theory was performed to elucidate the structure of this thiotetrazole system. And the time‐dependent DFT (TD‐DFT) calculations of absorption spectra reveal two electron‐transition bands derived from the contribution of π → π* transitions, which are in agreement with experimental results. Moreover, compound 1 exhibits a blue‐light emission (λ_em = 441 nm) in the solid state at room temperature. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:435–443, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21034     

Control of Exchange Interactions in π Dimers of 6‐Oxophenalenoxyl Neutral π Radicals: Spin‐Density Distributions and Multicentered–Two‐Electron Bonding Governed by Topological Symmetry and Substitution at the 8‐Position

The tri‐tert‐butylphenalenyl (TBPLY) radical exists as a π dimer in the crystal form with perfect overlapping of the singly occupied molecular orbitals (SOMOs) causing strong antiferromagnetic exchange interactions. 2,5‐Di‐tert‐butyl‐6‐oxophenalenoxyl (6OPO) is a phenalenyl‐based air‐stable neutral π radical with extensive spin delocalization and is a counter analogue of phenalenyl in terms of the topological symmetry of the spin density distribution. X‐ray crystal structure analyses showed that 8‐tert‐butyl‐ and 8‐(p‐XC₆H₄)‐6OPOs (X=I, Br) also form π dimers in the crystalline state. The π‐dimeric structure of 8‐tert‐butyl‐6OPO is seemingly similar to that of TBPLY even though its SOMO–SOMO overlap is small compared with that of TBPLY. The 8‐(p‐XC₆H₄) derivatives form slipped stacking π dimers in which the SOMO–SOMO overlaps are greater than in 8‐tert‐butyl‐6OPO, but still smaller than in TBPLY. The solid‐state electronic spectra of the 6OPO derivatives show much weaker intradimer charge‐transfer bands, and SQUID measurements for 8‐(p‐BrC₆H₄)‐6OPO show a weak antiferromagnetic exchange interaction in the π dimer. These results demonstrate that the control of the spin distribution patterns of the phenalenyl skeleton switches the mode of exchange interaction within the phenalenyl‐based π dimer. The formation of the relevant multicenter–two‐electron bonds is discussed.     

Invariom‐model refinement and Hirshfeld surface analysis of well‐ordered solvent‐free dibenzo‐21‐crown‐7

Crown ethers and their supramolecular derivatives are well‐known chelators and scavengers for a variety of cations, most notably heavier alkali and alkaline‐earth ions. Although they are widely used in synthetic chemistry, available crystal structures of uncoordinated and solvent‐free crown ethers regularly suffer from disorder. In this study, we present the X‐ray crystal structure analysis of well‐ordered solvent‐free crystals of dibenzo‐21‐crown‐7 (systematic name: dibenzo[b ,k ]‐1,4,7,10,13,16,19‐heptaoxacycloheneicosa‐2,11‐diene, C₂₂H₂₈O₇). Because of the quality of the crystal and diffraction data, we have chosen invarioms, in addition to standard independent spherical atoms, for modelling and briefly discuss the different refinement results. The electrostatic potential, which is directly deducible from the invariom model, and the Hirshfeld surface are analysed and complemented with interaction‐energy computations to characterize intermolecular contacts. The boat‐like molecules stack along the a axis and are arranged as dimers of chains, which assemble as rows to form a three‐dimensional structure. Dispersive C—H…H—C and C—H…π interactions dominate, but nonclassical hydrogen bonds are present and reflect the overall rather weak electrostatic influence. A fingerprint plot of the Hirshfeld surface summarizes and visualizes the intermolecular interactions. The insight gained into the crystal structure of dibenzo‐21‐crown‐7 not only demonstrates the power of invariom refinement, Hirshfeld surface analysis and interaction‐energy computation, but also hints at favourable conditions for crystallizing solvent‐free crown ethers.     

Crystal Structure and Spectroscopic Properties of Bis[trans‐dichlorobis(2,2‐dimethylpropane‐1,3‐diamine)chromium(III)] Tetrachlorozincate

The structure of trans‐[Cr(Me₂tn)₂Cl₂]₂ZnCl₄ (Me₂tn = 2,2‐dimethylpropane‐1,3‐diamine) was determined by a single‐crystal X‐ray diffraction study at 173 K. The analysis reveals that there are three crystallographically independent chromium(III) complex cations in the title compound. The chromium(III) atoms are coordinated by four nitrogen atoms of Me₂tn and two chlorine atoms in a trans arrangement, displaying a distorted octahedral geometry. The two six‐membered chelate rings in three complex cations are oriented in an anti chair–chair conformation with respect to each other. The Cr–N and Cr–Cl bond lengths average 2.0862(2) and 2.3112(6) Å, respectively. The ZnCl₄^2– have slightly distorted tetrahedral arrangement with Zn–Cl lengths and the Cl–Zn–Cl angles are influenced by hydrogen bonding. The resolved absorption maxima in the electronic d–d spectrum were fitted with a secular determinant for a quartet energy state of the d³ configuration in a tetragonal field. It is confirmed that the nitrogen atoms of the Me₂tn ligand are strong σ donors, but the chloro ligands have weak σ‐ and π donor properties toward the chromium(III) ion.     

On the Solvent‐free Structure of a Jäger‐type Cobalt(II) N2O2‐Chelate Complex

A combined synchrotron X‐ray and density functional theory (DFT) study on the structure of a Jäger‐type N₂O₂ chelate complex was carried out. The ethoxy‐substituted bis(3‐oxo‐enaminato)cobalt(II) complex ( 1 ) was an original sample from the laboratory of the late Professor Ernst‐G. Jäger (University of Jena, Germany). Single‐crystal X‐ray analysis revealed essentially flat molecules of 1 , which are unsolvated and coordinatively unsaturated. The DFT calculations on the isolated molecule predict a planar structure for the non‐hydrogen atoms, which is a local minimum on the energy surface. The crystal packing is achieved through off‐set stacking (staircase arrangement), resulting in a herringbone pattern in the space group P2₁2₁2₁. The structure of 1 is compared to known structures of related bis(3‐oxo‐enaminato)cobalt(II) complexes ( 2 – 4 ). Original bulk material of 1 was investigated by scanning electron microscopy (SEM), powder X‐ray diffraction (PXRD), melting point determination, and infrared (IR) spectroscopy.     

Cobalt(III) Complex [CoL3] Derived from an Asymmetric Bidentate Schiff Base Ligand L (L=(5‐Bromo‐2‐hydroxybenzyl‐2‐furylmethyl)‐imine): Synthesis,Characterization and Crystal Structure

Cobalt(III) complex [CoL₃], where L=(5‐bromo‐2‐hydroxybenzyl‐2‐furylmethyl)imine, has been synthesized by reacting cobalt(II) nitrate with L. The complex has been characterized by elemental analysis and FT‐IR spectroscopy. The crystal structure of [CoL₃] was determined by X‐ray crystallography from single crystal data. It crystallizes in the triclinic space group$ P {\bar 1} $ with unit cell parameters:a=9.6644(10) Å,b=11.5657(11) Å,c=16.5809(17) Å,α=102.833(4)°,β=102.999(3)°,γ=105.480(3)°,V=1659.9(3) ųandZ=2. Thermal decomposition of [CoL₃] was studied by thermogravimetry in order to evaluate its thermal stability and thermal decomposition pathways.     

Bis(2,4,7‐tri­methyl­indenyl)­cobalt(II) and rac‐2,2′,4,4′,7,7′‐hexamethyl‐1,1′‐biindene

The crystal and molecular structures of bis(η⁵‐2,4,7‐tri­methyl­indenyl)­cobalt(II), [Co(C₁₂H₁₃)₂], (I), and rac‐2,2′,4,4′,7,7′‐hexamethyl‐1,1′‐biindene, C₂₄H₂₆, (II), are reported. In the crystal structure of (I), the Co atom lies on an inversion centre and the structure represents the first example of a bis(indenyl)cobalt complex exhibiting an eclipsed indenyl conformation. The (1R,1′R) and (1S,1′S) enantiomers of the three possible stereoisomers of (II), which form as by‐products in the synthesis of (I), cocrystallize in the monoclinic space group P2₁/c. In the unit cell of (II), alternating (1R,1′R) and (1S,1′S) enantiomers pack in non‐bonded rows along the a axis, with the planes of the indenyl groups parallel to each other and separated by 3.62 and 3.69 Å.     

Synthesis,crystal structure and photophysical properties of 1,4‐bis(1,3‐diazaazulen‐2‐yl)benzene: a new π building block

A dimerized 1,3‐diazaazulene derivative, namely 1,4‐bis(1,3‐diazaazulen‐2‐yl)benzene [or 2,2′‐(1,4‐phenylene)bis(1,3‐diazaazulene)], C₂₂H₁₄N₄, (I), has been synthesized successfully through the condensation reaction between 2‐methoxytropone and benzene‐1,4‐dicarboximidamide hydrochloride, and was characterized by ¹H NMR and ¹³C NMR spectroscopies, and ESI–MS. X‐ray diffraction analysis reveals that (I) has a nearly planar structure with good π‐electron delocalization, indicating that it might serve as a π building block. The crystal belongs to the monoclinic system. One‐dimensional chains were formed along the a axis through π–π interactions and adjacent chains are stabilized by C—H…N interactions, forming a three‐dimensional architecture. The solid emission of (I) in the crystalline form exhibited a 170 nm red shift compared with that in the solution state. The observed optical bandgap for (I) is 3.22 eV and a cyclic voltammetry experiment confirmed the energy levels of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). The calculated bandgap for (I) is 3.37 eV, which is very close to the experimental result. In addition, the polarizability and hyperpolarizability of (I) were appraised for its further application in second‐order nonlinear optical materials.