Precise synthesis of porphyrin array scaffolding polyisocyanides

Aryl isocyanides bearing free‐base and metallo‐porphyrins were prepared and polymerized with a Pd–Pt μ‐ethynediyl complex as the initiator to give polymers with narrow polydispersity indices. The molecular weights of the resulting polymers were precisely controlled by the initial feed ratio of the porphyrin monomer to the initiator. The UV–VIS spectra suggested that the porphyrin pendants are regularly arranged to form stacked columns. Metallo‐porphyrin polymers were also prepared by reacting free‐base porphyrin polymers with metal salts. The successive reactions of free‐base and zinc‐porphyrin monomers resulted in the formation of diblock polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 585–595, 2006     

Über die Konzentrationsabhängigkeit der Viskosität bei organischen Hochpolymeren

Zusammenfassung Es wird eine Korrekturformel zur 8. Potenzformel von Philippoff-Heß vorgeschlagen, die auch die Fälle gut wiedergibt, wo die einfache 8. Potenzformel ebenso wie andere Viskositätsgleichungen bisher versagten. Im einzelnen wird die Gleichung geprüft an folgenden bisherigen Ausnahmen: Cellit in Eisessig (Philippoff-Heß), polymere-Hydroxydekansäuren in sym-Tetrachloräthan(Kraemer-von Natta), polymere Polystyrole in Benzol (Dane). In jedem Falle stellen diek-Werte gute Konstanten dar.Die charakteristische Viskositätskonstantek zeigt eine lineare Zunahme mit dem Molekulargewicht der Polymerhomologen.Die Temperaturabhängigkeit vonk unda wird geprüft.     

Socket with built-in valves for the interconnection of microfluidic chips to macro constituents

This paper reports a prototype for a standard connector between a microfluidic chip and the macro world. This prototype demonstrate a fully functioning socket for a microchip to access the outside world by means of fluids, data signals and energy supply. It supports up to 10 channels for the input and output of liquids or gases, as well as compressed air or vacuum lines for pneumatic power lines. The socket has built-in valves for each flow channel. It also contains 28 pins for the connection of electrical signals and power. Built-in valves make it possible to control the flow in each channel independently. A chip ( 11.0 x 11.0 x 0.9 mm) can be mounted into or dismounted from the socket with one touch. The fluidic connectors of the socket are designed to contact vertically on the top of chip. And the electrical connectors (the spring array) of that physically support the chip and contact lead pads at the bottom of chip. No adhesives or solders are used at any contact points. The pressure limit for the connection of working fluids was 0.2 MPa and the current limit for the electrical connections was 1 A. This socket supports both serial and parallel processing applications. It exhibits great potential for developing microfluidic systems efficiently.     

Enantioselective uptake of amino acid with overoxidized polypyrrole colloid templated with L-lactate

An overoxidized polypyrrole colloid, which can recognise enantiomers of amino acids has been prepared by a newly developed molecular imprinting technique. A polypyrrole colloid, which had been polymerised from a mixture of pyrrole (monomer), polyvinylpyrrolidone (steric stabiliser), peroxodisulfate (oxidant) and L-lactate (dopant), was overoxidized to create a dopant-complementary cavity. The enantioselectivity of the overoxidized colloid was evaluated by comparing the uptake of L-alanine and L-cysteine with that of the respective D-enantiomers. The L/D uptake ratios for these amino acids were about 2, while phenylalanine showed suppressed uptake for both the enantiomers. The absence of phenylalanine uptake can be explained in terms of the molecular size, which is too large to be accommodated by the cavity created by L-lactate. In contrast, a colloid templated with L-phenyllactate took up L-phenylalanine with a higher enantioselectivity of about 7. A colloid templated with L-lactate was applied to surface chirality analysis through enantioselective adsorption on cysteine-modified gold surfaces. Quartz microbalance experiments and scanning electron microscope observation of the gold surface revealed that the colloidal particle has higher affinity to a surface modified with L-cysteine than to one modified with D-cysteine.     

Diffusion coefficient of 36Cl in silver chloride

Diffusion coefficient of 36Cl in silver chloride was revealed to be about 1 x 10(-10)-4 x 10(-11) cm2 . s-1 in the range of 400 degrees C-200 degrees C by means of radioactive tracer measurements. Activation energy for diffusion was calculated about 0.13 eV. These results were different from those obtained by Maurer and Compton.     

Preparation,stability, reactivity and synthetic utility of a cadmium stabilized complex of difluoromethylene phosphonic acid ester

Diethyl bromodifluoromethyl phosphonate reacts readily with cadmium metal to form a stable cadmium complex. Depending on solvent, this functionalized organocadmium reagent exhibits stability for days to months. It reacts with a variety of electrophiles and serves as a synthetically useful source for the introduction of the difluoromethylene phosphonate group into organic compounds.The synthetic utility of a wide variety of fluoromethylene phosphonium ylides has been a major effort in our laboratory over the past several years [1]. The generation and capture of difluoromethylene ylides ($\text{1}$) as a general route to difluoromethylene olefins has been of especial interest to us [2]. In an effort to increase the nucleophilicity of the ylide, we have attempted to prepare the analogous phosphonate ylide ($\text{2}$). Although we have achieved modest success [3] by $\text{insitu}$ capture of ($\text{2}$) in the reaction of

sodium dialkyl phosphites with diethyl bromodifluoromethylphosphonate ($\text{3}$), attempts to pregenerate ($\text{2}$), either from diethyl difluoromethylphosphonate ($\text{4}$) or ($\text{3}$), have met with little success. ($\text{2}$) appears to have minimal stability even at low temperatures, and scale up processes of synthetic value would seem to be difficult.     

Characterization of modified alumina as adsorbents. Modification of alumina with alkali metal phosphates

Summary Alumina may be considerably modified by impregnating at 100°C in the alkali metal phosphate solution. The available solution for modification was the KOH–K₂HPO₄–AlPO₄ (11.51M) solution or the NaOH–Na₂ HPO₄ (0.81.1 M or 11.5M) solution. The appreciable improvement on chromatograms was obtained by preheating of the alumina, especially above 800°C prior to impregnating A further modification may be made by ignition of the alumina impregnated. The x-ray diffraction studies revealed the phase transformation of the alumina inducing the modification, and the essential factor of the present modification method being the thermal treatment of the alumina at temperatures forming -alumina.     

Probing surface properties and glass-liquid transition of amorphous solid water: temperature-programmed TOF-SIMS and TPD studies of adsorption/desorption of hexane

The interaction of hexane with amorphous solid water has been investigated in terms of the surface diffusion, hydrogen bond imperfections, hydrophobic hydration, crystallization, and glass-liquid transition. The hexane exhibits two main peaks in temperature-programmed desorption: one is ascribed to a complex formed at the surface or subsurface sites (135 K) and the other is caused by a bulk complex (165 K). The latter is associated with the presence of frozen-in imperfections in hydrogen bonds and formed provided that the annealing temperature of the film is below 130 K, whereas the former is created even when the film is annealed up to 150 K. Thus, the hexane-water interaction is hardly characterized by simple physisorption. The hexane is incorporated in the bulk during reorganization of hydrogen bonds due to rotational and translational diffusions of water molecules above 120-140 K, whereas the surface complex is formed even below 120 K due to the surface diffusion of molecules. The film undergoes abrupt dewetting at 165 K as a consequence of the glass-liquid transition. The slow evolution of the fluidity in the supercooled liquid phase may be responsible for the delay of the structural relaxation (165 K) relative to the onset of the translational molecular diffusion (135-140 K).     

Radical cyclization by ipso substitution of the methoxy group: considerable effect of HMPA on samarium-mediated cyclization

Alkyl radicals generated by treatment of thiocarbamates of conformationally favorable 3-alkyl-3-arylpropan-1-ols with tris(trimethylsilyl)silane and AIBN efficiently undergo intramolecular ipso substitution of the methoxy group, yielding the corresponding cyclized products. In contrast, either conformationally favorable or flexible 1-arylalkan-3- or 4-ones easily cyclize into five- or six-membered condensed rings by treatment with SmI(2) via ketyl radical intermediates. The addition of HMPA as cosolvent dramatically changes the cyclization mode of the SmI(2)-induced reaction, and the para-cyclization products are exclusively formed. This "HMPA effect" can be rationalized by the strong chelating ability of HMPA with the samarium atom.