Melanin offers protection against induction of cyclobutane pyrimidine dimers and 6-4 photoproducts by UVB in cultured human melanocytes

The goal of this investigation was to correlate the melanin content in human pigmentary cells with the generation of UVB-induced photoproducts and to examine the relationship between the melanin content and the removal of the photoproducts. Cultured melanocytes from light-skinned individuals synthesized less melanin and produced more cyclobutane pyrimidine dimers and 6-4 photoproducts upon UVB exposure than did melanocytes from black skin. Tyrosine-stimulated melanogenesis provided protection against DNA damage in both cell types. In another set of pigmented cell lines a ratio between eumelanin and pheomelanin was determined. The assessment of association between DNA damage induction and the quantity and quality of melanin revealed that eumelanin concentration correlated better with DNA protection than pheomelanin. Skin type-I and skin type-VI melanocytes, congenital nevus (CN)-derived cells and skin type-II melanocytes from a multiple-melanoma patient were grown in media with low or high L-tyrosine concentration. The cells were irradiated with 200 J/m2 UVB, and the levels of the photoproducts were determined immediately and after 6 and 24 h. Once again the induction of the photoproducts was mitigated by increased melanogenesis, and it was inversely correlated with the skin type. No significant differences were found for the removal of photoproducts in the cultures of skin types I and VI and CN cells. No indications of a delay in the removal of photoproducts in the melanocytes from the multiple-melanoma patient were found either.     

The role of multiple solution tasks in developing knowledge and creativity in geometry

This paper describes changes in students’ geometrical knowledge and their creativity associated with implementation of Multiple Solution Tasks (MSTs) in school geometry courses. Three hundred and three students from 14 geometry classes participated in the study, of whom 229 students from 11 classes learned in an experimental environment that employed MSTs while the rest learned without any special intervention in the course of one school year. This longitudinal study compares the development of knowledge and creativity between the experimental and control groups as reflected in students’ written tests. Geometry knowledge was measured by the correctness and connectedness of the solutions presented. The criteria for creativity were: fluency, flexibility, and originality. The findings show that students’ connectedness as well as their fluency and flexibility benefited from implementation of MSTs. The study supports the idea that originality is a more internal characteristic than fluency and flexibility, and therefore more related with creativity and less dynamic. Nevertheless, the MSTs approach provides greater opportunity for potentially creative students to present their creative products than conventional learning environment. Cluster analysis of the experimental group identified three clusters that correspond to three levels of student performance, according to the five measured criteria in pre- and post-tests, and showed that, with the exception of originality, performance in all three clusters generally improved on the various criteria.     

Calcium Phosphate Dental Materials Prodused with the Help of Natural Alumosilicates

Abstract

Calcium phosphates are well known to be perspective as biomaterials, for example. the dental ones. There are two tendencies in investigation and design of such materials. They are the search of porous biomaterials and development of dense bioceramics on the basic of hydroxópatite and crystallized calcium phosphate glasses. Control of glasses crystallization with the help of modificators and nucleating agents is the main way for producing dense biomaterials [1, 2]. We used natural alumosiiicates, for example, kaolin as a reagent and modificator for calcium polyphosphate to achieve a good quality of materials without stages of glass formation and glass crystallization.     

Isothiocyanatochloromethylphosphonates and Phosphinates – Versatile Synthones for Obtaining of S (Se), N,P–Containing Heterocycles

Abstract

Isothiocyanatochloromethyl(thio)phosphonates and (thio)-phosphinates 1 (X=O, S; R¹ = OPh, CH₂Cl, NCS; R² = H, Cl have been found to be convenient starting material for synthesis of a variety of S (Se), N, P-containing cyclic compounds. They react with different proton containing nucleophiles in the presence of a base with formation of saturated 2 and unsaturated 3 five membered phosphacyclanes. Diisothiocyanatodichloromethylphosphonates 1 (R¹ = NCS, R² =Cl) produce with amines and thiols appropriate bicyclic compounds 4.     

Synthesis and characterisation of PEG-peptide surfaces for proteolytic enzyme detection

Peptide surfaces were obtained by the covalent immobilisation of fluorescently labelled pentapeptides carboxyfluorescein–glycine–arginine–methionine–leucine–glycine, either directly or through a poly(ethylene glycol) (PEG) linker on modified silicon wafers. Each step during the preparation of the peptide surfaces was confirmed by several surface characterisation techniques. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy were used to determine the surface composition, the wafers philicity was measured by contact angle and atomic force microscopy was used to investigate the surface morphology. Exposure of the peptide surfaces to trypsin resulted in the release of a fluorescently labelled peptide product, which allowed the kinetics of the enzymatic reaction to be followed with the aid of fluorescence spectroscopy. The electrospray ionisation mass spectrometry analysis of the post-digestion solution confirmed that the pentapeptides attached to the solid support undergo specific trypsin hydrolysis at the C-terminus of the arginine residues. Detailed surface analyses before and after the enzyme action was performed using ToF-SIMS. Because of the limited accessibility of the short peptide directly attached to the surface, a quantitative yield of enzymatic hydrolysis was observed only in case when the peptide was bound through the PEG linker. The insertion of the PEG linker increased the number of immobilised peptides and the rate of enzymatic digestion which consequently improved the quality of the enzyme assays. The described approach may be used for different peptide sequences designed for other proteases.

Cold crystallization kinetics of slag from the joint smelting of oxidized nickel and sulfide copper ores

Journal of Thermal Analysis and Calorimetry - The cold crystallization kinetics of the glass-crystal composition (90.3 vol% of glass) made of slag from the joint smelting of oxidized nickel and...     

Effect of organic dye on the performance of dye-sensitized solar cell utilizing TiO2 nanostructure films synthesized via CTAB-assisted liquid phase deposition technique

This work is concerned with the growth of TiO₂ nanostructures as photovoltaic materials of dyesensitized solar cell (DSSC) via phase liquid deposition technique treated with CTAB surfactant. This work investigates the influence of organic dyes, N719, N3 and Z907 as photosensitizer on the photovoltaic parameters of TiO₂ nanostructures dye-sensitized solar cells (DSSCs). It also highlights the effect of the concentration of the best dye, N719 on the performance of the cell. The platinum films as counter electrode of the DSSC were prepared by sputtering platinum pellet on ITO substrate. The redox couple of the electrolyte utilized in the DSSC was iodide/triiodide. The cell sensitized with N719 dye demonstrated the best performance compared with the cell sensitized with another two dyes, N3 and Z907. This is due to N719 dye possess the highest optical absorption in visible region. The cell sensitized with 0.8 mM N719 dye performs the highest short-circuit current density, J _sc and power conversion efficiency, η since it posses the highest absorption in visible region. The DSSC utilizing 0.8 mM N719 dye demonstrated the highest J _sc and η of 6.48 mA cm^?2 and 1.69%, respectively.     

Controlled migration of antifog additives from LLDPE compatibilized with LLDPE grafted maleic anhydride

This paper summarizes a study of controlled migration of an antifog (AF) additive; sorbitan monooleate (SMO), from linear low density polyethylene (LLDPE) films containing a compatibilizer, LLDPE grafted maleic anhydride (LLDPE‐g‐MA). LLDPE/LLDPE‐g‐MA/SMO blends were prepared by melt compounding. Bulk and surface properties of compression molded LLDPE films containing SMO and LLDPE‐g‐MA were characterized using Fourier transform infrared spectroscopy and contact angle measurements. Thermal properties were investigated using a thermal gravimetric analyzer. Diffusion coefficient (D) was calculated, and AF properties were characterized using a “hot fog” test. Compression molded films were characterized for their morphology using high‐resolution scanning electron microscopy, and rheological properties were measured using a parallel‐plate rotational rheometer. It was found that the LLDPE/LLDPE‐g‐MA/SMO systems are characterized by a slower SMO migration rate, a lower diffusion coefficient, and lower contact angle values compared with LLDPE/SMO blends. These results are well correlated with results of a hot fog test. Morphological studies revealed a very fine dispersion of SMO in the LLDPE films, when 3 phr LLDPE‐g‐MA was combined with 1 phr SMO. Thermal analysis results show that the incorporation of 3 phr LLDPE‐g‐MA and 1 phr SMO significantly increases the decomposition temperature of the blend at T > 400°C. At high shear rates, the LLDPE blends show that the AF and the compatibilizer have a lubrication effect on LLDPE. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis,identification and study of electrical conductivity of the doped poly aniline

Poly aniline and poly aniline doped with 2,5-dimethyl benzene sulfonic acid (PXSA), 4-hydroxy-m-benzene disulfonic acid (PDSA), 3-chloro-4-hydroxybenzene sulfonic acid (OCPSA) were prepared. The polymers are identified by FT-IR and UV–vis spectroscopy. The ionic conductivities of poly aniline and poly aniline doped with 2,5-dimethyl benzene sulfonic acid (PXSA), 4-hydroxy-m-benzene disulfonic acid (PDSA), 3-chloro-4-hydroxybenzene sulfonic acid (OCPSA) were studied as a function of weight of the dopant compounds. It is noted that an increase of the conductance of poly aniline by doping with OCPSA, and became equal to 0.001321 Ω^?1 for 1 g higher than the conductance for the poly aniline when it is doped with OCPSA.