Effect of humidity on the adsorption kinetics of lung surfactant at air-water interfaces

The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.     

Solid-phase extraction–spectrophotometric determination of uranium(VI) in natural waters

A method for the extraction and determination of uranyl ion in natural waters using octadecyl bonded silica membrane disks modified with piroxicam and spectrophotometry with arsenazo(III) is proposed. The perconcentration step was studied with regard to experimental parameters such as amount of extractant, type and amount of eluent, pH, flow rates and tolerance limit of diverse ions on the recovery of uranyl ion. The limit of detection of the proposed method is 0.4 micro g L(-1) of uranyl. The method was applied to the recovery of uranyl from different water samples.     

CAROTENOID-TO-BACTERIOCHLOROPHYLL SINGLET ENERGY TRANSFER IN CAROTENOID-INCORPORATED B850 LIGHT-HARVESTING COMPLEXES OF Rhodobacter sphaeroides R-26.1

Four carotenoids, 3,4,7,8-tetrahydrospheroidene, 3,4,5,6-tetrahydrospheroidene, 3,4-dihydrospheroidene and spheroidene, have been incorporated into the B850 light-harvesting complex of the carotenoidless mutant, photosynthetic bacterium, Rhodobacter sphaeroides R-26.1. The extent of π-electron conjugation in these molecules increases from 7 to 10 carbon-carbon double bonds. Carotenoid-to-bacteriochlorophyll singlet state energy transfer efficiencies were measured using steady-state fluorescence excitation spectroscopy to be 54 ± 2%, 66 ± 4%, 71 ± 6% and 56 ± 3% for the carotenoid series. These results are discussed with respect to the position of the energy levels and the magnitude of spectral overlap between the S, (2′AJ state emission from the isolated carotenoids and the bacteriochlorophyll absorption of the native complex. These studies provide a systematic approach to exploring the effect of excited state energies, spectral overlap and excited state lifetimes on the efficiencies of carotenoid-to-bacteriochlorophyll singlet energy transfer in photosynthetic systems.     

Chemical and thermal stability of alkanethiol and sulfur passivated InP(100)

InP(100) surfaces treated with Na2Sx9H20 and CnH(2n+1)SH are examined by contact angle measurement, X-ray photoelectron spectroscopy, and atomic force microscopy to determine the chemical and thermal behavior of these passivated surfaces. The surfaces coated by octadecanethiol (n = 18) self-assembled monolayers (SAMs) are found to be more stable toward oxidation than the S-passivated surface. The chemical stability of octadecanethiol SAMs in various environments is examined. The thiol monolayer is found to be stable in 0.1 M HCl but degrades in 0.1 M NaOH, boiling chloroform, and water. The behavior of these surfaces at elevated temperatures under a vacuum is also investigated. The octadecanethiol-coated InP(100) is stable up to 473 K, above which the films begin to degrade. Unlike other substrates on which the entire molecule including the sulfur headgroup desorbs together, on InP, the sulfur headgroup remains on the surface even after annealing to 673 K. These observations suggest that the desorption occurs by S-C bond cleavage as well as In-S bond cleavage. The sulfur of S-passivated InP is found to be more thermally stable than that of the octadecanethiol monolayer, perhaps due to their different bonding geometries and hence energies.     

One Pot Synthesis of Octahydroquinazolinone Derivatives Using (Me (Im)<Superscript>12</Superscript>) H<Subscript>4</Subscript>CuPW<Subscript>11</Subscript>O<Subscript>39</Subscript> as a Surfactant Type Catalyst

This study is aimed at proposing a practical green procedure for the synthesis of octahydroquinazolinone derivatives using benzaldehyde, dimedone and urea under microwave irradiation in water. A surfactant type polyoxometalate-based organic–inorganic hybrid was able to efficiently catalyze this synthesis. The catalyst was prepared and characterized by Fourier transform infrared, UV–Vis, X-ray diffraction, and thermogravimetric analysis. The employed catalyst exerted a synergistic effect; the anion part acted as a catalyst while the cation part acted as a surfactant in order to increase the concentration of organic reactants in water. The main advantage of this method is its remarkable yield in short reaction periods, which results in the rendering of products with high purity. Moreover, this heterocatalyst is capable of being easily recovered and reused several times. The influences of reaction conditions were studied systematically, and a possible catalysis mechanism was proposed for understanding the highly efficient heterogeneous catalytic behavior.     

A New Reaction of Isatin,Cyclic 1,3‐Diketone,and 2‐Cyanoacetamide: A Four‐Component Synthesis of Spirooxindoles

A novel reaction of isatins, 2‐cyanoacetamide, and cyclic 1,3‐diketones in ethanol was reported. The reaction gave the unexpected spirooxindole ethyl carboxylates in excellent yields and the spirooxindole carboxamide was not observed.     

Novel palladium nanoparticles supported on β‐cyclodextrin@graphene oxide as magnetically recyclable catalyst for Suzuki–Miyaura cross‐coupling reaction with two different approaches in bio‐based solvents

A novel nanocatalyst was designed and prepared. Initially, the surface of magnetic graphene oxide (M‐GO) was modified using thionyl chloride, tris(hydroxymethyl)aminomethane and acryloyl chloride as linkers which provide reactive C═C bonds for the polymerization of vinylic monomers. Separately, β‐cyclodextrin (β‐CD) was treated with acryloyl chloride to provide a modified β‐CD. Then, in the presence methylenebisacrylamide as a cross‐linker, monomers of modified β‐CD and acrylamide were polymerized on the surface of the pre‐prepared M‐GO. Finally, palladium acetate and sodium borohydride were added to this composite to afford supported palladium nanoparticles. This fabricated nanocomposite was fully characterized using various techniques. The efficiency of this easily separable and reusable heterogeneous catalyst was successfully examined in Suzuki–Miyaura cross‐coupling reactions of aryl halides and boronic acid as well as in modified Suzuki–Miyaura cross‐coupling reactions of N‐acylsuccinimides and boronic acid in green media. The results showed that the nanocatalyst was efficient in coupling reactions for direct formation of the corresponding biphenyl as well as benzophenone derivatives in green media based on bio‐based solvents. In addition, the nanocatalyst was easily separable, using an external magnet, and could be reused several times without significant loss of activity under the optimum reaction conditions.     

One‐Pot Synthesis of Dialkyl 2‐(Alkyl or aryl)‐6‐(pyrimidin‐2‐ylthio)‐4‐thioxo‐5,6‐dihydro‐4H‐1,3‐oxazine‐5,6‐dicarboxylate Derivatives via a Four‐Component Reaction

A number of new dialkyl 2‐(alkyl or aryl)‐6‐(pyrimidin‐2‐ylthio)‐4‐thioxo‐5,6‐dihydro‐4H‐1,3‐oxazine‐5,6‐dicarboxylate have been prepared in good yield from the multicomponent reaction between 2‐mercaptopyrimidines and acetylenic diesters with acetyl or benzoyl isothiocyanate.     

Highly sensitive FRET-based fluorescence immunoassay for aflatoxin B1 using cadmium telluride quantum dots

We report on a competitive immunoassay for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from anti-aflatoxin B1 antibody (immobilized on the shell of CdTe quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The highly specific immunoreaction between the antibody against aflatoxin B1 on the QDs and the labeled-aflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photoexcitation of the QDs. In the absence of unlabeled aflatoxin B1, the antigen-antibody complex is stable, and strong emission resulting from the FRET from QDs to labeled aflatoxin B1 is observed. In the presence of aflatoxin B1, it will compete with the labeled aflatoxin B1-albumin complex for binding to the antibody-QDs conjugate so that FRET will be increasingly suppressed. The reduction in the fluorescence intensity of the acceptor correlates well with the concentration of aflatoxin B1. The feasibility of the method was established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the increased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spike human serum, over the range of 0.1–0.6 μmol·mL^?1. The limit of detection is 2?×?10^?11 M. This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require excessive washing and separation steps.