Alysis of the volatile constituents of food by headspace GC-MS with reversal of the carrier gas flow during sampling

A technique has been developed for performing headspace GC-MS analysis of volatile components of food, in which the carrier gas flow is reversed during sampling in order to overcome problems caused by the diffusion of substances not retained by the cold trap. Chromatographic profiles of volatile compounds from cheeses, obtained at room temperature, provide confirmation of the validity of the reversed flow technique, and the versatility of the system is evidenced by its successful application to both solid and liquid matrixes: the absence of any discrimination against the various components reveals its efficacy for compounds with a wide range of volatility. Addition of internal standards to the sample enables the use of the technique for quantitative analysis.     

Electrochemically deposited ZnO films: an XPS study on the evolution of their surface hydroxide and defect composition upon thermal annealing

Electrodeposition from ZnCl₂ aqueous solution was performed to grow ZnO thin films on the surface of polycrystalline copper plates. Electrochemical parameters for deposition were optimized by means of cyclic voltammetry (CV). The morphology of the deposits was studied via scanning electron microscopy (SEM), and their chemical composition was ascertained by means of X-ray photoelectron spectroscopy (XPS). The effects of changing the deposition bath temperature (T _bath) and the role played by post-deposition treatments, such as temperature and time of annealing in air, were studied. SEM images of freshly deposited vs. annealed samples have shown that in the former case the films display a rough morphology with mixed grain/hexagonal platelets structures and in the latter smaller but more uniformly dispersed cubic grains. T _bath is found to be the key parameter to induce the different morphology in the deposited films, which reflects in a different chemical reactivity of surface species, as found on the basis of the binding energies and relative quantitative ratios between Zn 2p and O 1s peaks. In fact, a higher T _bath favours a more efficient desorption of OH groups upon annealing, the O 1s peak resulting to much more drastically modified oxide/hydroxide intensity ratio with respect to the case of the sample deposited at lower T _bath.     

Metal-free and transition-metal tetraferrocenylporphyrins part 1: synthesis, characterization, electronic structure, and conformational flexibility of neutral compounds

H(2)TFcP [TFcP = 5,10,15,20-tetraferrocenyl porphyrin(2-)] was prepared by a direct tetramerization reaction between pyrrole and ferrocene carbaldehyde in the presence of a BF(3) catalyst, while the series of MTFcP (M = Zn, Ni, Co and Cu) were prepared by a metallation reaction between H(2)TFcP and respective metal acetates. All compounds were characterized by UV-vis and MCD spectroscopy, APCI MS and MS/MS methods, high-resolution ESI MS and XPS spectroscopy. Diamagnetic compounds were additionally characterized using (1)H and (13)C NMR methods, while the presence of low-spin iron(ii) centers in the neutral compounds was confirmed by M?ssbauer spectroscopy and by analysis of the XPS Fe 2p peaks, revealing equivalent Fe sites. XPS additionally showed the influence on Fe 2p binding energies exerted by the distinct central metal ions. The conformational flexibility of ferrocene substituents in H(2)TFcP and MTFcP, was confirmed using variable-temperature NMR and computational methods. Density functional theory predicts that alpha,beta,alpha,beta atropisomers with ruffled porphyrin cores represent minima on the potential energy surfaces of both H(2)TFcP and MTFcP. The degree of non-planarity is central-metal dependent and follows the trend: ZnTFcP < H(2)TFcP approximately CuTFcP < CoTFcP < NiTFcP. In all cases, a set of occupied, predominantly ferrocene-based molecular orbitals were found between the highest occupied and the lowest unoccupied, predominantly porphyrin-based molecular orbitals. The vertical excitation energies of H(2)TFcP were calculated at the TDDFT level and confirm the presence of numerous predominantly metal-to-ligand charge-transfer bands coupled via configurational interaction with expected intra-ligand pi-pi* transitions.     

Designing Cascades of Electron Transfer Processes in Multicomponent Graphene Conjugates

A novel family of nanocarbon-based materials was designed, synthesized, and probed within the context of charge-transfer cascades. We integrated electron-donating ferrocenes with light-harvesting/electron-donating (metallo)porphyrins and electron-accepting graphene nanoplates (GNP) into multicomponent conjugates. To control the rate of charge flow between the individual building blocks, we bridged them via oligo-p-phenyleneethynylenes of variable lengths by β-linkages and the Prato–Maggini reaction. With steady-state absorption, fluorescence, Raman, and XPS measurements we realized the basic physico-chemical characterization of the photo- and redox-active components and the multicomponent conjugates. Going beyond this, we performed transient absorption measurements and corroborated by single wavelength and target analyses that the selective (metallo)porphyrin photoexcitation triggers a cascade of charge transfer events, that is, charge separation, charge shift, and charge recombination, to enable the directed charge flow. The net result is a few nanosecond-lived charge-separated state featuring a GNP-delocalized electron and a one-electron oxidized ferrocenium.     

Coupled LC-GC: A new method for the on-line analysis of organochlorine pesticide residues in fat

This paper describes the use of coupled LC-GC for the determination of organochlorine pesticide residues in fat samples. Organochlorine pesticide residues are preseparated from fat by LC on a short C-18 column using an organic solvent as the mobile phase. Evaporation of the LC eluent is achieved by a modified on-column interface, introducing an on-line vaporizer module using the fully concurrent evaporation technique.     

The Effect of Ligand Denticity in Size‐Selective Synthesis of Calix[n]arene‐Stabilized Gold Nanoparticles: A Multitechnique Approach

A series of gold nanoparticles (AuNPs) stabilized by monodentate, bidentate, and tridentate thiolate calix[n]arene ligands 1 – 3 was prepared by using the Brust–Schiffrin two‐phase direct synthesis and characterized with NMR spectroscopy, elemental analysis, transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). The experimental data show that the particular multidentate structure of calix[n]arene derivatives 2 and 3 introduces a control element in the preparation of the gold nanoparticles that allows, in the particular experimental conditions here reported, to obtain very small (≈1 nm) AuNPs. These are the first experimental findings that identify a role of ligand “denticity” in the determination of the nuclearity of nanoparticles.     

In-house validation of an improved sample extraction and clean-up method for GC determination of isomers of nervonic acid in meat products

An improved extraction and clean-up method for determination of brain-specific fatty acids, in particular lignoceric acid (C24:0) and the cis/ trans isomers of nervonic acid (15 c-t C24:1), in meat products has been developed. The method is based on isolation of the polar lipids of interest from the bulk lipids by solid-phase extraction. The fatty acids, derivatised to their fatty acid methyl esters, are quantified by GC in a DB5 column. Fresh meat samples were extracted by using a mixture of n-butanol:hexane (1:9) as solvent. The extract was loaded in a silica gel cartridge column previously equilibrated with hexane. The first fraction containing the major part of the fat was eluted with hexane while acetone and methanol allowed the elution of fatty acids bound to polar moieties such as nervonic and lignoceric acids. This second fraction containing the analyte was methylated and injected into the GC for quantification after addition octacosane (C(28)) as internal standard.     

Assembly of Gold Nanoparticles on Functionalized Si(100) Surfaces through Pseudorotaxane Formation

The assembly of gold nanoparticles (AuNPs) on a hydrogenated Si(100) surface, mediated by a series of hierarchical and reversible complexation processes, is reported. The proposed multi‐step sequence involves a redox‐active ditopic guest and suitable calix[n]arene‐based hosts, used as functional organic monolayers of the two inorganic components. Surface reactions and controlled release of AuNPs have been monitored by application of XPS, atomic force microscopy (AFM), field‐emission scanning electron microscopy (FESEM) and electrochemistry.     

Volatile enrichment on automatic static headspace using a precolumn and stopping the carrier gas flow during injection

The aim of this study was to develop a technique for performing automatic static headspace analysis of volatiles without a cryogenic device. Reconcentration of solutes was accomplished using a graphitized carbon coated precolumn between two splitting points and stopping carrier gas flow during injection. Chromatographic profiles of volatile compounds from ground coffee compared with split and splitless injections provide confirmation of the good sensitivity of the technique. The analysis of a standard mixture covering a wide range of volatility confirms that the described technique might be useful to achieve enrichement of low volatile headspace compounds, even if discrimination against the various components is present.     

Holstein-Peirls-Hubbard trimer as a model for quadrupolar two-photon absorbing dyes

The linear and nonlinear optical properties of a Donor-Acceptor-Donor system have been investigated by using a two-electron three-point-site model system. Some basic features of electron correlations are included in the model by means of a bi-electronic density matrix. The polarizabilities and second hyperpolarizabilities have been computed with a modified version of the Collective Electronic Oscillators (CEO) method which allowed us to include the electron-phonon coupling. Both singly- and doubly-excited states are taken into account in the computation of (hyper-)polarizabilities. The effects of electron-phonon coupling on the two-photon absorption and on the third harmonic generation in the infrared region are discussed.