NMR spectral analysis of strongly second-order 6-, 8-, 9- and 10- spin-systems (1H─19F, 19F─19F,and 13C─19F) in perfluorotoluyl- and tetrafluoro-pyridyl-aromatics using the lineshape method ANATOLIA

A simple to use nuclear magnetic resonance analysis method has been tested on complex ¹H, ¹⁹F, and ¹³C multiplets. This open-source line-shape analysis method analysis of total lineshape (ANATOLIA)¹ provides some significant advantages over traditional assign-iterate methods of NMR spectral analysis by avoiding false minima and progressing optimisation to the global minimum. The target molecules are 1-perfluorotol-4-yl-2-perfluorotol-4-yl-oxymethyl-1H-benzimidazole (molecule-I) and 1-tetrafluoropyrid-4-yl-2-tetrafluoropyrid-4-yl-thio-1H-benzimidazole (molecule-II) which were produced as part of a family of fluorinated drug scaffolds prepared for anticancer and antiparasitic screening. Spectra display significant second-order effects with ¹H Δδ = 3.68 and 4.67 Hz for the aromatic hydrogen “triplets”, with ¹⁹F ⁴J_AA', ⁴J_BB', ⁴J_XX', and ⁴J_YY' coupling constants range from +4.8 to −14.0 Hz and for ¹³C-isotopomers ¹⁹F Δδ of up to 111.56 Hz. A spin-system of six coupling nuclei (H_aH_bH_cH_d F_YF_Y') was analysed in 12 s, a spin-system of nine coupling fluorine nuclei (AA'BB'CCC-YY') was analysed within 2 min, and 10 coupling nuclei (XX'YY'ZZZ-BB'-H_d) was optimised in 6 min using a laptop computer. ANATOLIA was also robust enough to be able to yield accurate spectral values from inaccurate input values. In both compounds, a fluorine–fluorine coupling constant was identified between the two fluoro-aromatic rings (F_BB' and F_YY') of +4.05 and +4.67 Hz and attributed to a through-space interaction. Ab initio structure optimisations and coupling constant calculations provided useful input data for spectral analysis. A modern ¹⁹F nuclear magnetic resonance spectrum of perfluorotoluene (octafluorotoluene) and analysis from 1975 was used as a test data set to assess ANATOLIA.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

Influence of Relative Permeability on the Stability Characteristics of Immiscible Flow in Porous Media

Relative permeability functions for immiscible displacements in porous media show a wide range of profiles. Although, this behavior is well known, its impact on the stability of the displacement process is unexplored. Our analysis clearly demonstrates for the first time that the viscous instability characteristics of two-phase flows are governed not only by their end point values, but are strongly dependent on the actual profile of relative permeability functions. Linear stability analysis predicts the capacity of the flow to develop large scale fingers which can result in substantial bypassing of the resident fluid. It is observed that relative permeability functions attributed to drainage processes yield a more unstable displacement as compared to functions related to imbibition processes. Moreover, instability is observed to increase for those relative permeability functions which result from increased wettability of the wetting fluid. High accuracy numerical simulations show agreement with these predictions and demonstrate how large amplitude viscous fingers result in significant bypassing for certain relative permeability functions. In the nonlinear regime, the finger amplitude grows at a rate ∝ t^1/2 initially, drops to t^1/4 at a later time and finally grows ∝ t. The basic mechanisms of finger interaction, however, are not substantially influenced by relative permeability functions.     

Large-volume stacking in capillary electrophoresis using pH hysteresis of the electroosmotic flow in a bare fused-silica capillary

For large-volume stacking with the electroosmotic flow pump (LVSEP) in capillary electrophoresis of anionic analytes it is required that the electroosmotic mobility (EOM) should be smaller than the magnitudes of the effective mobilities of the analytes. When a fused-silica capillary is treated with an acidic solution, the silanoate group on the silica surface is neutralized to silanol and the EOM is suppressed. Due to the slow deprotonation equilibrium of the silanol group at an intermediate pH, this reduced EOM can be retained during a number of electrophoresis runs. Using a bare fused-silica capillary preconditioned with 0.01 M HCl, successful LVSEP at pH 6.0 was achieved for weakly acidic compounds with two orders of magnitude enhancements in the concentration sensitivity. The repeatability in migration times of ten analytes stacked by LVSEP in a single day was excellent with the relative standard deviation (RSD) less than 1% (n = 6). The day-to-day repeatability was also excellent with RSD less than 3% (n = 3 x 6) when the capillary was preconditioned each day.     

The new ether derivative of phenylpropanoid and bioactivity was investigated from the leaves of Piper betle L.

Abstract

A new ether derivative of phenylpropanoid compound, γ-(γ′-isohydroxychavicol)-chavicol octanyl ether (K1) along with one known phenylpropanoid named allyl-pyrocatechol or hydroxychavicol (2) were isolated from Piper betle var. kali collected from Tumluk district, West Bengal India. We first report the presence of compound K1 in the genus Piper. Their structures were established on the basis of various spectroscopic analyses. Compounds K1 and 2 showed excellent antioxidant DPPH free radical scavenging activity with IC₅₀ values of 4.61 and 4.12?µg/mL compared to ascorbic acid as a standard antioxidant drug with IC₅₀ value of 3.42?µg/mL, respectively. Evaluation of in vitro cytotoxic activities of compounds K1 and 2 showed significant effects against human oral cancer cell lines (AW13516 and AW8507), human hepatoma cell lines (HEPG2 and PLC-PRF-5) and a human pancreatic cell line (MIA-PA-CA-2), compared to Doxorubicin^® as a standard cytotoxic drug with GI₅₀ values of <10 and 18.18?µg/mL.     

The aftermath of the interplay between the endoplasmic reticulum stress response and redox signaling

The endoplasmic reticulum (ER) is an essential organelle of eukaryotic cells. Its main functions include protein synthesis, proper protein folding, protein modification, and the transportation of synthesized proteins. Any perturbations in ER function, such as increased demand for protein folding or the accumulation of unfolded or misfolded proteins in the ER lumen, lead to a stress response called the unfolded protein response (UPR). The primary aim of the UPR is to restore cellular homeostasis; however, it triggers apoptotic signaling during prolonged stress. The core mechanisms of the ER stress response, the failure to respond to cellular stress, and the final fate of the cell are not yet clear. Here, we discuss cellular fate during ER stress, cross talk between the ER and mitochondria and its significance, and conditions that can trigger ER stress response failure. We also describe how the redox environment affects the ER stress response, and vice versa, and the aftermath of the ER stress response, integrating a discussion on redox imbalance-induced ER stress response failure progressing to cell death and dynamic pathophysiological changes.Subject terms: Mechanisms of disease, Cell biology     

Decomposition of vegetables for determination of Zn,Cd, Pb and Cu by stripping voltammetry

A simple and accurate digestion method using nitric acid, perchloric acid and hydrogen peroxide has been developed for use in trace analysis for heavy metals in vegetables by differential pulse anodic stripping voltammetry. The recovery of the metals from the samples is lower if the hydrogen peroxide is omitted from the digestion mixture. Standard reference materials have been analysed satisfactorily by this method.     

Evolutionary Quasi-Variational-Hemivariational Inequalities I: Existence and Optimal Control

Journal of Optimization Theory and Applications - We study a nonlinear evolutionary quasi–variational–hemivariational inequality (in short, (QVHVI)) involving a set-valued...     

Quantitation of cortico-steroids as common adulterants in local drugs by HPLC

Summary A sensitive and specific method for quantitation of the steroids betamethasone, prednisolone and cortisone acetate commonly used as adulterants in locally produced herb extracts and in certain homeopathic drugs is described. Reverse-phase liquid chromatography with UV detection has been used.