Simultaneous sensing of L-tyrosine and epinephrine using a glassy carbon electrode modified with nafion and CeO2 nanoparticles

An electrochemical sensor was developed and tested for detection of L-tyrosine in the presence of epinephrine by surface modification of a glassy carbon electrode (GCE) with Nafion and cerium dioxide nanoparticles. Fabrication parameters of a surfactant-assisted precipitation method were optimized to produce 2–3 nm CeO₂ nanoparticles with very high surface-to-volume ratio. The resulting nanocrystals were characterized structurally and morphologically by X-ray diffractometery (XRD), scanning and high resolution transmission electron microscopy (SEM and HR-TEM). The nanopowder is sonochemically dispersed in a Nafion solution which is then used to modify the surface of a GCE electrode. The electrochemical activity of L-tyrosine and epinephrine was investigated using both a Nafion-CeO₂ coated and a bare GCE. The modified electrode exhibits a significant electrochemical oxidation effect of L-tyrosine in a 0.2 M Britton-Robinson (B-R) buffer solution of pH 2. The electro-oxidation peak current increases linearly with the L-tyrosine concentration in the molar concentration range of 2 to 160 μM. By employing differential pulse voltammetry (DPV) for simultaneous measurements, we detected two reproducible peaks for L-tyrosine and epinephrine in the same solution with a peak separation of about 443 mV. The detection limit of the sensor (signal to noise ratio of 3) for L-tyrosine is ~90 nM and the sensitivity is 0.20 μA μM^?1, while for epinephrine these values are ~60 nM and 0.19 μA μM^?1. The sensor exhibited excellent selectivity, sensitivity, reproducibility and stability as well as a very good recovery time in real human blood serum samples.

Simultaneous electrochemical determination of L-tyrosine and epinephrine in blood plasma with Nafion-CeO₂/GCE modified electrode showing a 443 mV peak-to-peak potential difference between species oxidation peak currents.     

Optical detection of phenolic compounds based on the surface plasmon resonance band of Au nanoparticles

An indirect colorimetric method is presented for detection of trace amounts of hydroquinone (1), catechol (2) and pyrogallol (3). The reduction of AuCl4(-) to Gold nanoparticles (Au-NPs) by these phenolic compounds in the presence of cetyltrimethylammonium chloride (CTAC) produced very intense surface plasmon resonance peak of Au-NPs. The plasmon absorbance of Au-NPs allows the quantitative colorimetric detection of the phenolic compounds. The calibration curves derived from the changes in absorbance at lambda = 568 nm were linear with concentration of hydroquinone, catechol and pyrogallol in the range of 7.0 x 10(-7) to 1.0 x 10(-4)M, 6.0 x 10(-6) to 2.0 x 10(-4)M and 6.0 x 10(-7) to 1.0 x 10(-4)M, respectively. The detection limits were 5.3 x 10(-7), 2.5 x 10(-6) and 3.2 x 10(-7)M for the hydroquinone, catechol and pyrogallol, respectively. The method was applied satisfactorily to the determination of phenolic compounds in water samples and pharmaceutical formulations.     

Quantum Probes for the Characterization of Nonlinear Media

Active optical media leading to interaction Hamiltonians of the form H=λ˜(a+a†)ζ represent a crucial resource for quantum optical technology. In this paper, we address the characterization of those nonlinear media using quantum probes, as opposed to semiclassical ones. In particular, we investigate how squeezed probes may improve individual and joint estimation of the nonlinear coupling λ˜ and of the nonlinearity order ζ. Upon using tools from quantum estimation, we show that: (i) the two parameters are compatible, i.e., the may be jointly estimated without additional quantum noise; (ii) the use of squeezed probes improves precision at fixed overall energy of the probe; (iii) for low energy probes, squeezed vacuum represent the most convenient choice, whereas for increasing energy an optimal squeezing fraction may be determined; (iv) using optimized quantum probes, the scaling of the corresponding precision with energy improves, both for individual and joint estimation of the two parameters, compared to semiclassical coherent probes. We conclude that quantum probes represent a resource to enhance precision in the characterization of nonlinear media, and foresee potential applications with current technology.     

Aromatization of 1,4‐dihydropyridines in the presence of methanesulfonic acid/NaNO2/wet SiO2 under both heterogeneous and solvent free conditions

A combination of methanesulfonic acid and sodium nitrite in the presence of wet SiO₂ was used as an effective oxidizing agent for the oxidation of 1,4‐dihydropyridines to the corresponding pyridine derivatives under mild and heterogeneous conditions in excellent yields.     

Simultaneous sensing of L-tyrosine and epinephrine using a glassy carbon electrode modified with nafion and CeO2 nanoparticles

An electrochemical sensor was developed and tested for detection of L-tyrosine in the presence of epinephrine by surface modification of a glassy carbon electrode (GCE) with Nafion and cerium dioxide nanoparticles. Fabrication parameters of a surfactant-assisted precipitation method were optimized to produce 2–3 nm CeO₂ nanoparticles with very high surface-to-volume ratio. The resulting nanocrystals were characterized structurally and morphologically by X-ray diffractometery (XRD), scanning and high resolution transmission electron microscopy (SEM and HR-TEM). The nanopowder is sonochemically dispersed in a Nafion solution which is then used to modify the surface of a GCE electrode. The electrochemical activity of L-tyrosine and epinephrine was investigated using both a Nafion-CeO₂ coated and a bare GCE. The modified electrode exhibits a significant electrochemical oxidation effect of L-tyrosine in a 0.2 M Britton-Robinson (B-R) buffer solution of pH 2. The electro-oxidation peak current increases linearly with the L-tyrosine concentration in the molar concentration range of 2 to 160 μM. By employing differential pulse voltammetry (DPV) for simultaneous measurements, we detected two reproducible peaks for L-tyrosine and epinephrine in the same solution with a peak separation of about 443 mV. The detection limit of the sensor (signal to noise ratio of 3) for L-tyrosine is ~90 nM and the sensitivity is 0.20 μA μM⁻¹, while for epinephrine these values are ~60 nM and 0.19 μA μM⁻¹. The sensor exhibited excellent selectivity, sensitivity, reproducibility and stability as well as a very good recovery time in real human blood serum samples.

Simultaneous electrochemical determination of L-tyrosine and epinephrine in blood plasma with Nafion-CeO₂/GCE modified electrode showing a 443 mV peak-to-peak potential difference between species oxidation peak currents.

     

A theoretical thermochemical study of solute-solvent dielectric effects in the displacement of codon-anticodon base pairs

Quantum-chemical solvent effect theories describe the electronic structure of a molecular subsystem embedded in a solvent or other molecular environment. The solvation of biomolecules is important in molecular biology, since numerous processes involve proteins interacting in changing solvent-solute systems. In this theoretical study, we focus on mRNA-tRNA base pairs as a fundamental step in protein synthesis influenced by hydrogen bonding between two antiparallel trinucleotides, namely, the mRNA codon and tRNA anticodon. We use the mean reaction field theories, which describe electrostatic and polarization interactions between solute and solvent in the AAA, UUU, AAG, and UUC triplex sequences optimized in various solvent media such as water, dimethylsulfoxide, methanol, ethanol, and cyclopean using the self-consistent reaction field model. This process depends on either the reaction potential function of the solvent or charge transfer operators that appear in solute-solvent interaction. Because of codon and anticodon biological criteria, we performed nonempirical quantum-mechanical calculations at the BLYP and B3LYP/3-21G, 6-31G, and 6-31G* levels of theory in the gas phase and five solvents at three temperatures. Finally, to obtain more information, we calculated thermochemical parameters to find that the dielectric constant of solvents plays an important role in the displacement of amino acid sequences on codon-anticodon residues in proteins, which can cause some mutations in humans.     

Two-dimensional solution for electro-mechanical behavior of functionally graded piezoelectric hollow cylinder

In this paper, the general theoretical analysis for a hollow cylinder made of functionally graded piezoelectric material subjected to two-dimensional electromechanical load, is developed. The material properties, except the Poisson’s ratio, are assumed to vary with the power law function through the thickness of the cylinder. The mechanical and electrical displacements are assumed to be a function of radial and circumferential directions. By using the separation of variables method and complex Fourier series, the Navier equations in terms of displacements are derived and solved.     

Fabrication of SAPO‐34 with Tuned Mesopore Structure

Crystalline SAPO‐34 molecular sieves with hierarchical network were synthesized employing polyethylene glycol (PEG) as the meso‐generating agent via a self‐assembly strategy. XRD, FESEM, N₂ adsorption‐desorption and FT‐IR spectroscopic analyses showed that PEG co‐template has a decisive role in tailoring the pore structure and producing a tuned structure from microporous towards the mesoporous structure. Also, addition of PEG favored the formation of more uniform and smaller crystals than the conventional SAPO‐34. In fact, PEG did not only control the size of crystals due to its crystal growth inhibiting (CGI) effect but also modified the morphology of the crystals and improved CSD (crystal size distribution) along with induction of mesopores into the porous structure. The modified SAPO‐34 would be recommended for selective formation of light olefins through the acid‐catalyzed reactions, such as the conversion of methanol to olefins/propylene (MTO/MTP) and propane dehydrogenation (PDH) to produce olefins with higher selectivity and catalyst stability than the conventional SAPO‐34.     

Bimetallic Ni–Co‐based metal–organic framework: An open metal site adsorbent for enhancing CO2 capture

An open metal site framework named UTSA‐16 was synthesized and modified as a high‐capacity adsorbent for reversible CO₂ capture. Partial substitution of intrinsic Co²⁺ sites of UTSA‐16 with Ni²⁺ centres was realized in the molar composition range 0–75% Ni with the aim of increasing CO₂ uptake. Synthesized bimetallic Nix‐UTSA‐16 (x = 0, 20, 50, 75) materials were characterized using various techniques to assess the influence of chemical composition on CO₂ binding affinity and any subsequent physical change in morphology, crystal size and porosity on the total uptake. Experimental isotherm adsorption studies showed the following trend for CO₂ adsorption capacity employing the Nix‐UTSA‐16 series: Ni20‐UTSA‐16 > UTSA‐16 > Ni50‐UTSA‐16 > Ni75‐UTSA‐16. According to the dynamic breakthrough CO₂ profiles measured for a mixture of CO₂ and CH₄ (15/85 molar ratio), Ni20‐UTSA‐16 exhibited 2 times the breakthrough time with 1.5 times the loading capacity at 75 Nml min^?1 feed flow rate, compared to the parent UTSA‐16. In addition, the Ni20‐UTSA‐16 bimetallic metal–organic framework exhibited lower isosteric heat of adsorption compared to UTSA‐16 (ΔH_ave = 28.54 versus 46.85 kJ mol^?1). As a result, more than 95% of its capacity was restored by applying a partial vacuum for only 1 h at room temperature without involving any other time‐ and energy‐consuming regenerative step.