New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Random multiblock poly(ester amide)s containing poly(L‐lactide) and cycloaliphatic amide segments: Synthesis and biodegradation studies

Novel multiblock poly(ester amide)s containing poly(L ‐lactide) and cycloaliphatic amide segments were synthesized from telechelic oligomer of α,ω‐hydroxyl terminated poly(L ‐lactide), 1,3‐cyclohexylbis(methylamine), and sebacoylchloride by the “two‐step” interfacial polycondensation method. The blocky nature of PEAs was established by FTIR and ¹H NMR spectroscopies. The effect of relative content of ester and amide segments on the crystallization nature of PEAs was investigated by WAXD and DSC analyses. PEAs having lower content of PLLA, PEA 1 and PEA 2, showed a crystallization pattern analogous to polyamides, whereas PEA 3, having higher content of PLLA, showed two crystalline phases characterized by polyester and polyamide segments. Random nature of PEAs was observed from single T_g values. Biodegradation studies using the enzyme lipase from Candida Cylindracea showed higher degradation rate for PEA 3 than that for PEA 1 and PEA 2. FTIR, ¹H NMR, and DSC analyses of the degraded products indicated the involvement of ester linkages in the degradation process. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3250–3260, 2006     

129I in soil and grass samples around a nuclear reprocessing plant

Neutron activation analysis was used to determine¹²⁹I in soil and grass samples around a reprocessing plant. The method involved wet oxidation of samples, using chromic acid, followed by distillation, collection of iodine in alkaline solution, loading on Dowex-1, irradiation and post-irradiation purification steps. The -activity of¹³⁰I isotope of the purified samples was measured for quantitative determination of¹²⁹I. The experimental results showed that¹²⁹I and the¹²⁹I/¹²⁷I atomic ratio in soil samples varied from 1.09×10^–4 to 5.33×10^–3 pCi g^–1 and 0.10×10^–6 to 6.12×10^–6, respectively. Further, the geometric mean of soil-to-plant transfer factor (Bv) for¹²⁹I was found to be 0.16 which was comparable with other published values.     

The stereoselective synthesis of aziridine analogues of diaminopimelic acid (DAP) and their interaction with dap epimerase

Aziridine analogues of diaminopimelic acid (DAP) have been prepared stereoselectively for the first time and evaluated as inhibitors of DAP epimerase. (2R,3S,3'S)-3-(3'-Aminopropane)aziridine-2,3'-dicarboxylate was synthesised and shown to be a reversible inhibitor of DAP epimerase with an IC(50) value of 2.88 mM. (2S,4S)- and (2S,4R)-2-(4-Amino-4-carboxybutyl)aziridine-2-carboxylic acid (ll-azi-DAP and dl-azi-DAP ) were made as pure diastereomers, and both were shown to be irreversible inhibitors of DAP epimerase. ll-Azi-DAP selectively binds to Cys-73 of the enzyme active site whereas dl-azi-DAP binds to Cys-217 via attack of sulfhydryl on the methylene of the inhibitor aziridine ring. These observations are consistent with the two base mechanism proposed for the epimerization of ll-DAP and meso-DAP by DAP epimerase.     

RuO2 electrode surface effects in electrocatalytic oxidation of glucose

We have studied the electrocatalytic activity of RuO₂-PVC film electrodes, fabricated using RuO₂ powders prepared at five different temperatures, viz., 300, 400, 500, 600 and 700°C, for the oxidation of glucose in high alkaline media, 1 to 3 M NaOH. The RuO₂-PVC film electrodes have been first characterized in 1 to 3 M NaOH solution by cyclic voltammetry (CV) and rotating disc electrode (RDE) techniques in a wide potential range −1,100 to 450 mV (SCE), and three redox pairs representing Ru(IV)/Ru(III), Ru(VI)/Ru(IV) and Ru(VII)/Ru(VI) transitions have been identified. The voltammetric peaks at low sweep rates have been analyzed using surface activity theory formulated for interacting electroactive adsorption sites, and interaction terms have been evaluated. The total voltammetric surface charges have been analyzed as per Trassatti’s formalism with respect to their dependence on potential sweep rate, and charges associated with less accessible and more accessible surface sites have been calculated. For glucose oxidation, the results have indicated that RuO₂ (700°C)-PVC electrode shows two oxidation peaks in contrast to RuO₂ (300°C)-PVC electrode. Also, RuO₂ (700°C)-PVC electrode exhibits higher intrinsic electrocatalytic activity than the 300°C electrode, although the former possesses lower electrochemically active surface area. Additionally, kinetic analyses made from RDE results with reference to Michealis–Menten (MM) enzyme catalysis has shown that RuO₂ (700°C) electrode possesses extended glucose-sensing range in terms of MM kinetic constant, K _M , compared to other electrodes. Possible reasons for such differences in the behavior of the electrodes of different temperatures towards glucose oxidation are identified from studies on oxidation of glucose in solutions of different pH, oxidation of different glucose derivatives, and also from physicochemical results from BET, XRD, SEM, DTGA, XPS analysis of RuO₂ powder samples.     

2,4,5-Tribromo-1H-imidazole in the egg masses of three muricid molluscs

From analysis by gas chromatography/mass spectrometry (GC/MS), the presence of either 2,4,5-tribromo-1H-imidazole (1) or 3,4,5-tribromo-1H-pyrazole (2) was tentatively identified in lipophilic extracts from the egg masses of three muricid molluscs. Synthesis of these compounds, followed by comparison of the GC retention times and fragmentation patterns from electron impact MS, with those of the natural products, indicated that it was 2,4,5-tribromo-1H-imidazole rather than the pyrazole. This imidazole is likely to be responsible for some of the antimicrobial activity observed in the egg extracts. This is the first report of this compound from a natural source.     

Functionalization of crosslinked poly(4-vinylpyridine) and poly(4-vinylpyridine-co-styrene) with permanganate species: Preparation of poly(4-vinylpyridinium permanganate)s and their use as oxidizing reagents

Crosslinked poly(4-vinylpyridine) and poly(4-vinylpyridine-co-styrene) were functionalized with permanganate group to afford the corresponding poly[4-vinyl(pyridinium permanganate)] resin. These resins were found to selectively oxidize alcohols to corresponding carbonyl compounds. These insoluble functionalized polymers possess the desired characteristics of the polymeric reagents, including operational simplicity, filterability, and regenerability. The influence of solvent, duration of reaction, and molar excess of the reagent in these oxidation reactions was investigated to find out the optimum conditions for effective oxidation reactions. The reactions were found to be more facilitated in nonpolar solvents, and a large excess of the polymeric reagent did not have any significant effect on the extent of reactions. The poly[4-vinyl(pyridinium permanganate)] resin bears a contrast to KMnO₄ and other polymer-supported oxidizing agents like poly[4-vinyl(pyridinium chlorochromate)] in that it does not bring about the oxidation of the alcohol group directly attached to the ring structure.