A new macrocyclic polystyrene-based sensor for chromium (III) ions

A new tetradentate dihydrogen perchlorate macrocyclic ligand (2,4,9,11-tetraphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene dihydrogen perchlorate) was prepared and characterised. The macrocycle behaves as a selective chelating ion-exchanger for some metal ions. The polystyrene-based membrane electrode is found to exhibit quite promising selectivity for Cr3+ ions. It can be used to estimate chromium concentrations in the range 3.16x 10(-6)-1.00x10(-1) M with a near-Nernstian slope of 17.5 mV per decade of concentration between pH 3.0 to 6.5. The electrode is found to possess a fast response time of 15 s and was used over a period of three months with good reproducibility (s = +/- 0.3 mV). The selectivity coefficient values for mono-, di- and trivalent cations indicate excellent selectivity for Cr3+ ions over a large number of other cations. Anions such as Cl- and SO4(2-) do not interfere and the electrode also works satisfactorily in a mixed organic-water solution. The sensor has been used as an indicator electrode for the potentiometric titration of Cr3+ with EDTA. The practical utility of the membrane sensor has also been demonstrated in solutions contaminated with detergents (CTAB and SDS). Above all, the membrane sensor has been very successfully used to determine Cr3+ in some foods.     

A polystyrene based membrane electrode for cadmium(II) ions

A polystyrene based membrane of 3,4:12,13-dibenzo-2,5,11,14-tetraoxo- 1,6,10,15-tetraazacyclooctade-cane shows a Nernstian response to Cd(II) ions over a wide concentration range (3.16 x 10(-6) - 1.00 x 10(-1) mol L(-1) with a Nernstian slope of 29.8 mV/decade of concentration, between pH 2.0 and 6.0. This electrode has been found to be chemically inert and of adequate stability with a response time of 20s. The electrode gives reproducible results with a lifetime of 130 days. The membrane works satisfactorily in a partially non-aqueous medium up to a maximum 35% (v/v) content of methanol and ethanol. The practical utility of the proposed chemical sensor has been observed by using it as end-point indicator in the titration of Cd(II) ions with EDTA. The potentiometric selectivity coefficient values indicate that the membrane sensor is highly selective for Cd(II) ions over a number of cations. Small amounts of surfactants do not disturb the functioning of the sensor. This electrode has also been used to estimate cadmium ions in real samples.     

Electrochemical studies of novel olivine-layered (LiFePO4-Li2MnO3) dual composite as an alternative cathode material for lithium-ion batteries

Journal of Solid State Electrochemistry - In the present work, olivine-layered composites, i.e., LiFePO4-Li2MnO3, are successfully synthesized in the form of a single monolithic electrode and layer...     

Base mediated synthesis of α-aminated aroyl/acetylnaphthalenes through [4+2] annulations

We have developed a base promoted simple, efficient and alternative approach for the synthesis of 4-amino-3-aroyl//heteroaroyl/acetyl-2-methylsulfanyl-naphthalene-1-carbonitriles by reaction of easily accessible 3,3-bis(methylthio)-1-aryl/heteroaryl/acetylprop-2-en-1-one and 2-cyanomethyl-benzonitrile. Reaction of 1-(2-halo/methoxy-phenyl)-3,3-bis(methylthio)prop-2-en-1-one and 2-cyanomethyl-benzonitrile under basic conditions also afforded 6-(methylthio)-7-oxo-7,12-dihydrobenzo[c]acridine-5-carbonitrile along with usual product. Structure of the synthesized product has been confirmed by single X-ray crystallography.     

Experimental investigation of drying of garlic clove in solar dryer using phase change material as energy storage

This investigation deals with thermodynamic analysis, which offers an alternative approach to evaluate the performance of solar dryers and thin-layer drying characteristics of garlic cloves in a developed system. The garlic cloves were dried from a moisture content of 55.5 % (w.b.) to 6.5 % (w.b.) for 8 h. The drying data obtained were fitted to five different drying kinetics models. Of these, the model suggested by Midilli et al. [28] had the best fit with the drying behavior of garlic cloves. The energy efficiency without and with recirculation of the air exiting the drying chamber during the study varied from 43.06 to 83.73 %, and 3.98 to 14.95 %, respectively, while the exergy efficiency corresponding to the energy efficiency of the drying process ranged from 5.01 to 55.30 % and 67.06 to 88.24 %, respectively.     

Development of Humidity Sensor Using Nanoporous Polycarbonate Membranes

Russian Journal of Physical Chemistry A - In the present work, the effect of temperature and moisture has been studied on nano-porous polycarbonate membranes of size 15, 50, and 80 nm, respectively...     

Structural, magnetotransport and morphological studies of Sb-doped La2/3Ba1/3MnO3 ceramic perovskites

We report here the structural, magnetotransport and morphological studies of Sb-doped La_2/3Ba_1/3Mn_1−xSb_xO₃ perovskite manganites. Pristine material La_2/3Ba_1/3MnO₃ (LBMO) shows two insulator-metal (I-M) transitions in the electrical resistivity-temperature (ρ-T) behavior. While the higher temperature transition (T_P1) at ∼340 K is reminiscent of the usual I-M transition in manganites, the lower temperature transition (T_P2) at ∼250 K has been ascribed to the grain boundary (GB) effects arising out of the ionic size mismatch between the ions present at the rare-earth site (La³⁺ and Ba²⁺). With Sb-doping T_P1 shifts to lower temperatures while T_P2 remains invariant up to 3% and shifts to lower temperature for 5%. Room temperature electrical resistivity and the peak values also increase successively with Sb-doping. Scanning electron micrographs of the samples exhibit a gradual increase in their grain sizes with Sb indicating a gradual decrease in the GB density. Shift of T_P1 with doping is explained on the basis of a competition between double-exchange and super-exchange mechanisms. The overall electrical resistivity increases and the shift in the electrical resistivity hump (T_P2) with Sb-doping is found related to be gradually decreasing GB density and the ensuing lattice strain increase at the GBs. The intrinsic magnetoresistance (MR) gets suppressed and extrinsic MR gets enhanced with Sb-doping. At T>T_P1, the electrical resistivity is found to follow the adiabatic polaron hopping model whereas the electron-magnon scattering is found to dominate in the metallic regime (T<T_P1).     

Soft mode dynamics of perovskite type crystals

The soft mode dynamics and related properties of perovskite, ABO₃-type crystals have been studied using the operator form of the model Hamiltonian proposed by Pytte. The correlations have been evaluated using the double time thermal Green’s function technique and Dyson’s equation. Without any decoupling, the higher order correlations, appearing in the dynamical equation, have been evaluated using the renormalized Hamiltonian. The dielectric properties are directly related to the optical soft mode. The phonon width and shift have been calculated for different structural phases. The analysis of the temperature dependence of microwave loss tangent and dielectric constant explains the experimental results.     

One pot three component synthesis of spiro [indolo-3,10’-indeno[1,2-b]quinolin]-2,4,11’-triones as a new class of antifungal and antimicrobial agents

A simple and efficient three component procedure has been developed for the synthesis of highly substituted spiro[indolo-3,10'-indeno[1,2-b]quinolin]-2,4,11'-triones by one pot three component condensation of enaminones, isatin and indane-1,3-dione in ethanol:water (1:1) in presence of ceric ammonium nitrate (CAN) as catalyst. This method provides several advantages such as lesser reaction time, high yield of products and operational simplicity. The antimicrobial activity of some of the compounds has been investigated against six microbial strains, some of the tested compounds showed good antimicrobial activity.