The WCl6-e-Al-CH2Cl2 catalyzed polypentenamer formation via ring-opening metathesis polymerization (ROMP)

The synthesis of polypentenamer by an electrochemically generated metathesis polymerization catalyst from methylene chloride solution of WCl₆ was investigated. The active species formed by electroreduction of this salt under controlled potential of +900 mV at a platinum cathode with an aluminum anode were found to catalyze the ring-opening metathesis polymerization (ROMP) of cyclopentene, monocyclic olefin of relatively low strain, in high yield (89%) and at short period (32 min) under mild conditions. The effect of reaction parameters, e.g., olefin/catalyst ratio, reaction time, electrolysis time, catalyst aging, on the polymerization yield have been studied. The resulting polymer has been characterized by ¹H and ¹³C NMR, IR and gel permeation chromatography (GPC) techniques. Analysis of the polypentenamer microstructure by means of ¹³C NMR spectroscopy indicates that the polymer contains a mainly trans stereoconfiguration of the double bonds (σ_c = 0.31) and a slightly blocky distribution (r_tr_c > 1) of cis and trans double bond dyads (r_tr_c = 1.44). However, this electrochemical system is reluctant to facilitate the competing vinyl type addition polymerization reactions.     

Molar conductance of aqueous solutions of sodium, potassium, and nickel trifluoromethanesulfonate at 25‡C

The electrical conductivities of aqueous solutions of NaCF₃SO₃, KCF₃SO₃, and Ni(CF₃SO₃)₂ have been measured at 25‡C in the concentration range 1 to 25X 10^-3 mol-dm^-3 The data approach the Onsager limiting law at low concentrations, leading to a limiting molar ion conductivity for the CF₃SO ₃ ⁻ ion of 44.5±0.2 S-cm²-mol^-1, based on standard values for the cations. Using a simple size parameter for unsymmetrical polyatomic ions, based on the ion geometry, it is shown that the well known empirical relation between the molar conductivities of symmetrical ions and their radii can be extended to include certain polyatomic anions including CF₃SO ₃ ⁻ . The results suggest that the CF₃SO ₃ ⁻ ion is either a weak structure breaker in aqueous solution or neutral in this respect.     

The first bis(orotato–N,O) complex: Synthesis,crystal structure,spectroscopic and thermal characterization of (chaH)2[Cu(HOr–N,O)2(cha)] · 2H2O (cha = cyclohexylamine and HOr = orotate(2−))

The novel bis(cyclohexylaminium) cyclohexylaminebis(orotate–N,O)cuprate(II) dihydrate, (C₆H₁₅N)₂[Cu(C₅H₂N₂O₄)₂(C₆H₁₄N)] · 2H₂O, has been prepared and characterized by elemental analysis, magnetic measurements, FT-IR and UV–Vis spectroscopy, thermal analysis and X-ray diffraction. The Cu(II) complex crystallizes in the monoclinic space group P2₁/c. The copper atom in the five-coordinated (chaH)₂[Cu(HOr–N,O)₂(cha)] · 2H₂O is chelated by a deprotonated pyrimidine nitrogen atom and carboxylate oxygen atom as a bis(bidentate) ligand and the cyclohexylamine ligand completes the square-pyramidal coordination. The thermal decomposition of the complex has been predicted by the help of thermal analysis (TG, DTG and DTA).     

A novel synthesis of 14-(hydroxymethylalkyl) derivatives of dibenzoxanthenes and 3,3-dimethyl-4-(2-hydroxy-1-naphthyl)benzo[f]chroman

Several reactions of 2-naphthol with 2-alkyl-2-hydroxymethylaldehydes have been investigated. Novel synthesis of 14-(hydroxymethyl)alkyldibenzo[a,j]xanthenes and 3,3-dimethyl-4-(2-hydroxy-1-naphthyl)benzo[f]chroman has been realized.     

Reactivity of 4-Hydroxy-2-pyrones in the Diels-Alder Reactions

Biphenylcarboxylic acid derivatives, and some tetracyclic bridge cycloadducts have been prepared by Diels-Alder reactions of acetylenic and olefinic dienophiles with 4-hydrpxy-6-phenyl-2H-pyran-2-one and its methyl ether derivative.     

Zwitterionic amino acids as precursors for nonmetal cation pentaborate salts

Nonmetal cation (NMC) pentaborate structures were synthesized using the amino acid molecules as cations precursors. Chemical composition analysis, infrared spectroscopy, mass analysis, boron nuclear magnetic resonance, and thermal gravimetric analysis (TGA/DTA) methods were used for structural characterization. The hydrogen storage efficiency of molecules was also determined experimentally. The recorded infrared spectra support the structural similarities of the molecules. Stretchings of pentaborate rings and characteristic peaks of amino acids were detected in infrared spectra. When the thermal analysis curves were recorded, it was found that the structures showed similar decomposition steps. Due to the result of thermal decay, glassy boron oxide (B₂O₃) formation was observed as the final decomposition products of all molecules. Peaks associated with boric acid, triborate, and pentaborate were observed in the ¹¹B spectra of these salts. Powder X-ray diffraction spectroscopy supports the presence of BO₃ and BO₄⁻ groups regarding the presence of pentaborate rings. It also indicates the high crystallinity of the structures. The molecular cavities detected by brunauer–emmett–teller analysis were found to be 3.586, 1.922, 1.673, and 1.923 g/cm³. Low-molecular cavities can be attributed to the high hydrogen-bonding capacity of the structures. The hydrogen capture efficiency of the pentaborate salts was found to be in the range of 0.039-0.     

The asymptotic iteration method applied to certain quasinormal modes and non Hermitian systems

We study the Schrödinger equation with potentials admitting quasinormal modes using the asymptotic iteration method (AIM). We also study non-Hermitian PT symmetric potentials using AIM. The spectra, in all cases, are found to be in excellent agreement with exact results.     

ROMP‐NMP‐ATRP combination for the preparation of 3‐miktoarm star terpolymer via click chemistry

A combination of ring opening metathesis polymerization (ROMP) and click chemistry approach is first time utilized in the preparation of 3‐miktoarm star terpolymer. The bromide end‐functionality of monotelechelic poly(N‐butyl oxanorbornene imide) (PNBONI‐Br) is first transformed to azide and then reacted with polystyrene‐b‐poly(methyl methacrylate) copolymer with alkyne at the junction point (PS‐b‐PMMA‐alkyne) via click chemistry strategy, producing PS‐PMMA‐PNBONI 3‐miktoarm star terpolymer. PNBONI‐Br was prepared by ROMP of N‐butyl oxanorbornene imide (NBONI) 1 in the presence of (Z)‐but‐2‐ene‐1,4‐diyl bis(2‐bromopropanoate) 2 as terminating agent. PS‐b‐PMMA‐alkyne copolymer was prepared successively via nitroxide‐mediated radical polymerization (NMP) of St and atom transfer radical polymerization (ATRP) of MMA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 497–504, 2009     

Developing Novel Antimicrobial and Antiviral Textile Products

In conjunction with an increasing public awareness of infectious diseases, the textile industry and scientists are developing hygienic fabrics by the addition of various antimicrobial and antiviral compounds. In the current study, sodium pentaborate pentahydrate and triclosan are applied to cotton fabrics in order to gain antimicrobial and antiviral properties for the first time. The antimicrobial activity of textiles treated with 3 % sodium pentaborate pentahydrate, 0.03 % triclosan, and 7 % Glucapon has been investigated against a broad range of microorganisms including bacteria, yeast, and fungi. Moreover, modified cotton fabrics were tested against adenovirus type 5 and poliovirus type 1. According to the test results, the modified textile goods attained very good antimicrobial and antiviral properties. Thus, the results of the present study clearly suggest that sodium pentaborate pentahydrate and triclosan solution-treated textiles can be considered in the development of antimicrobial and antiviral textile finishes.     

Spectroscopic characterization of charge-transfer complexes of morpholine with chloranilic and picric acids in organic media: Crystal structure of bis(morpholinium 2,4,6-trinitrocyclohexanolate)

Electron donor–acceptor interaction of morpholine (morp) with chloranilic acid (cla) and picric acid (pa) as π-acceptors was investigated spectrophotometrically and found to form stable charge-transfer (CT) complexes (n–π*) of [(Hmorp)₂(cla)] and [(Hmorp)(pa)]₂. The donor site involved in CT interaction is morpholine nitrogen. These complexes are easily synthesized from the reaction of morp with cla and pa within MeOH and CHCl₃ solvents, respectively. ¹HNMR, IR, elemental analyses, and UV–vis techniques characterize the two morpholinium charge-transfer complexes. Benesi–Hildebrand and its modification methods were applied to the determination of association constant (K), molar extinction coefficient (?). The X-ray crystal structure was carried out for the interpretation the predict structure of the [(Hmorp)(pa)]₂ complex.