Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.     

Hückel and Möbius cyclic conjugated molecules

Generalized graphs represent Hückel-type and Möbius-type polycyclic conjugated systems. We show that the number of generalized graphs with different spectra for a given parent graph is not larger than 2 ^N(R) and is equal to 2 ^N(R) if no two rings are equivalent,N(R) being the number of rings (fundamental circuits) in the parent graph. We demonstrate that the rule for the stability of generalized graphs, proved in a previuos paper, and the information on the relative magnitudes of the effects of individual circuits enable one to predict the stabilities of generalized graphs without performing numerical calculations.     

Solvatochromic studies of interactions between surfactants and poly(N-substituted acrylamide)s

Interactions between poly(N-substituted acrylamide)s and surfactants, such as sodium dodecyl sulfate (SDoS) and sodium decyl sulfate (SDeS), in aqueous solutions were investigated using a solvatochromic probe. The polymers used were poly(N,N-dimethylacrylamide) (PDMA), poly(N-isopropylacrylamide) (PIPA), poly(N-acryloylpyrrolidine) (PAPR), and poly(vinylpyrrolidone) (PVPy) for comparison. They were labeled with pyridinium dicyanomethylide chromophore as a solvatochromic probe, and the changes in the microenvironment polarity of the polymer upon association with surfactant micelles were investigated by monitoring the λ_max in the absorption spectra of the probe molecule. It was found that the Gibbs free energy of micelle stabilization by polymer complexation for SDoS is 7.6, 4.1, and 2.2 kJ mol⁻¹, and for SDeS 5.1, 2.9, and 0.8 kJ mol⁻¹ with PIPA, PAPR, and PDMA, respectively. These results indicate that the complexation between polymer and surfactant is influenced not only by the alkyl-chain length of the surfactant, but also by the polymer side groups.     

Prompt Gamma-Ray Analysis of Rats

Prompt -ray analysis with the internal monostandard method was used to organs taken from rats. After B or Cd was administered, the B/H and Cd/H contents ratios were determined in the brain, kidney, and liver to study their distribution and metabolism. Boron was distributed in all organs but metabolized quickly. Cd was slowly accumulated in the liver and kidneys during the 65 hours studied but no Cd was detected in the brain.     

Motion of redox molecules in solution monitored by the highly-sensitive EQCM technique

The behavior of redox molecules in solution that was not detected by electrochemical techniques was measured by a highly-sensitive electrochemical quartz crystal microbalance (EQCM) technique that has been improved in this study to obtain a high sensitivity of EQCM measurement in solution. The improved EQCM technique allowed to monitor the motion of a redox molecule, that is an access of the molecule to an electrode surface and repulsion from the surface during redox. An EQCM technique currently in use has measured adsorption of redox molecules on an electrode surface or polymerization on the surface caused by a chemical reaction following redox, which exhibits an enough large mass change response to detect with an EQCM measurement. However, access and repulsion of redox molecule, which is a slight motion of the molecule near on electrode surface, has not been detected and investigated by an EQCM technique, because the mass change response seems to be very small. In this study, the redox behavior of methyl viologen on a bare gold surface, pyridinethiol surface and methylpyridinethiol surface was investigated. Although the three electrodes give the same cyclic voltammogram of methyl viologen, the three are different in QCM response recorded at the same time as the voltammetry. Access/repulsion of methyl viologen within an electrical double layer was monitored by the highly-sensitive EQCM technique.     

Determination of boron in the thin surface layer of a silicon wafer by instrumental charged particle activation analysis

Instrumental charged particle activation analysis (CPAA) for determining boron in a thin surface layer of silicon was developed. The nuclear reaction and incident energy were selected in order to minimize any interference from surface or bulk impurities. Thin boron film was used as a standard sample and its boron content was determined by neutron induced prompt -ray analysis. As a result, we were able to determine¹¹B and¹⁰B at 10¹⁵ atoms/cm² with an accuracy of better than 3% by 4 MeV proton and 7 MeV -bombardment, respectively. Each boron isotope could be determined down to 10¹³ atoms/cm². Our CPAA was applied to determine boron in a boron implanted silicon wafer of a SIMS standard sample.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Reaction of 1-alkylthioisoquinolinium salts with active methylene compounds

2-Alkyl-1-alkylthioisoquinolinium salts were readily prepared from 2-alkyl-1(2H)-isoquinolones via 2-alkyl1(2H)-thioisoquinolones in two steps. Under mild conditions, the reaction of 2-alkyl-1-alkylthioisoquinolinium salts with active methylene compounds in the presence of sodium hydride afforded 2-alkyl-1-(substituted methylene)iso-quinolines in good yields. Pyrrolo[2,1-a]isoquinolines were synthesized by the cyclization of 2-benzyl-1-(substituted methylene)isoquinolines using acetic anhydride.     

Prompt gamma-ray analysis using cold and thermal guided neutron beams

The extraction behavior of uranium(VI), plutonium(IV) and some fission products like zirconium(IV), ruthenium(III) and europium(III) from 3.5M nitric acid with -irradiated organic phase pre-equilibratedn-dodecane solutions of dihexyl derivatives of hexanamide (DHHA), octanamide (DHOA) and decanamide (DHDA) has been investigated as a function of absorbed dose upto 184·10⁴ Gy. The results indicate that the extraction of uranium(VI) decreases gradually with dose upto 72·10⁴ Gy and becomes almost constant thereafter, while, the extraction of plutonium(IV) decreases upto a dose of 20·10⁴ Gy and then increases rapidly up to a dose of 82·10⁴ Gy indicating synergistic effects of radiolytic products formed at higher doses. Extraction of zirconium(IV) increases gradually upto a dose of 72·10⁴ Gy. Europium(III) does not get extracted with any of these amides in the entire dose range (0–184·10⁴ Gy) studied, however, ruthenium shows insignificant increase in extraction with dose. The decrease inD values noticed in the case of plutonium and zirconium after the dose of 72·10⁴ Gy which was attributed to the third phase formation and emulsification. Infrared studies confirm the final products of radiolysis as the respective amines and carboxylic acids. The degraded amide contents have been estimated by quantitative IR spectrophotometric technique. Extraction data obtained for uranium(VI) and plutonium(IV) with TBP/n-dodecane system have also been compared under similar experimental conditions.