The application of "click chemistry" for the decoration of 2(1H)-pyrazinone scaffold: generation of templates

The "click chemistry" approach has been explored on the 2-(1H)-pyrazinone scaffold for the generation of pharmacologically interesting heterocyclic moieties. Huisgen 1,3-dipolar cycloaddition has been evaluated as the key step for the construction of the 1,2,3-triazole ring at the C-3 position of 2-(1H)-pyrazinones. Two different pathways have been successfully evaluated: (1) via C-C or C-O linkage of the acetylenic part to the C-3 position of the 2-(1H)-pyrazinone scaffold or (2) via azide introduction in the C-3 position. The subsequent application of "click chemistry" resulted in the formation of hitherto unknown skeletons. Microwave irradiation has successfully been applied in different steps of the sequence.     

Real-time optical reconstruction of the diffused 3D object using phase information calculated by Continuous Wavelet Transform

We propose the real time optical reconstruction of a three-dimensional (3D) object from a digitally recorded hologram. Phase distribution of the recorded hologram is numerically calculated by 1-dimensional Continuous Wavelet Transform (1D-CWT) for digital reconstruction with phase only information. Also, the phase distribution of 1D-CWT transferred to the spatial light modulator (SLM) is used to obtain optically reconstructed image. It is observed that an efficient real-time analysis can be achieved, if phase of 1D-CWT is used. In the same time, optically reconstructed 3D objects obtained by only phase information are about three times brighter than bleached hologram intensity's. So the minimum power loss can be obtained. Numerical and experimental results are presented.     

Fractional diffusion-wave problem in cylindrical coordinates

In this Letter, we present analytical and numerical solutions for an axis-symmetric diffusion-wave equation. For problem formulation, the fractional time derivative is described in the sense of Riemann-Liouville. The analytical solution of the problem is determined by using the method of separation of variables. Eigenfunctions whose linear combination constitute the closed form of the solution are obtained. For numerical computation, the fractional derivative is approximated using the Grünwald-Letnikov scheme. Simulation results are given for different values of order of fractional derivative. We indicate the effectiveness of numerical scheme by comparing the numerical and the analytical results for α=1 which represents the order of derivative.     

Polymer‐coated Boron Doped Diamond Optically Transparent Electrodes for Spectroelectrochemical Sensors

Spectroelectrochemical sensors combine electrochemistry, spectroscopy, and partitioning into a film to provide improved selectivity for the target analyte. The sensor usually consists of an optically transparent electrode (OTE) coated with a charge selective polymer film. The polymer film is chosen to pre‐concentrate analyte at the OTE surface to improve the sensitivity and provide selectivity against like charged interferences. OTEs such as Indium Tin Oxide (ITO) have been used extensively for spectroelectrochemical sensors, but little is known about the applicability of such sensors using other OTE materials, such as Boron Doped Diamond (BDD). One distinct advantage of BDD OTEs over ITO OTEs is their significant increase in sensitivity for organic compounds, such as 4‐aminophenol and hydroquinone. We have developed absorption and fluorescence‐based sensing methods with a BDD OTE coated with a sulfonated ionomer film, Nafion. This is demonstrated with tris(2,2′‐bipyridyl)ruthenium(II) ion [Ru(bpy)₃²⁺] using an attenuated total reflectance (ATR) flow cell setup for both absorption and fluorescence. With a Nafion coated BDD optically transparent thin layer electrode (OTTLE), we developed a fluorescence based sensor for a common polyaromatic hydrocarbon (PAH), 1‐hydroxypyrene (1‐pyOH), achieving a detection limit of 80 nM (17 ppb). This work manifests new sensing applications while broadening the use of spectroelectrochemistry, OTEs, and BDD as an electrode material.     

Radioactivity measurements and risk assessments of spa waters in some areas in Turkey

The current study presents the results of the activity of radionuclides in spa waters, and evaluates their radiological influences on the population consuming these waters in the Central and Eastern Black Sea regions of Turkey. Since these waters are used for therapy and consumption purposes unconsciously, their radiological impact on the people was computed by taking into consideration the annual intake through ingestion of ²²⁶Ra, ²³²Th, ⁴⁰K, ¹³⁷Cs and ²²²Rn. The mean activities were estimated to be 11.35 for gross alpha, 6.23 for gross beta, 2.96 for ²²⁶Ra, 0.42 for ²³²Th, 0.069 for ¹³⁷Cs, 0.19 for ⁴⁰K, and 267 Bq L^–1 for ²²²Rn, respectively. The estimated effective doses from spa water were found to be 49.77 µSv a^–1 (²²⁶Ra), 5.95 µSv a^–1 (²³²Th), 0.07 µSv a^–1 (¹³⁷Cs), 0.83 µSv a^–1 (⁴⁰K) and 56.03 µSv a^–1 (²²²Rn). These values were evaluated and compared with related verified values from literature. Also, physico-chemical characterizations of spa water samples considered in the current study were investigated. This study would be useful for consumers and official authorities for the assessment of radiation exposure risk due to usage of the considered spa waters.     

A location–allocation heuristic for the capacitated multi-facility Weber problem with probabilistic customer locations

The capacitated multi-facility Weber problem is concerned with locating m facilities in the Euclidean plane, and allocating their capacities to n customers at minimum total cost. The deterministic version of the problem, which assumes that customer locations and demands are known with certainty, is a non-convex optimization problem and difficult to solve. In this work, we focus on a probabilistic extension and consider the situation where the customer locations are randomly distributed according to a bivariate distribution. We first present a mathematical programming formulation, which is even more difficult than its deterministic version. We then propose an alternate location–allocation local search heuristic generalizing the ideas used originally for the deterministic problem. In its original form, the applicability of the heuristic depends on the calculation of the expected distances between the facilities and customers, which can be done for only very few distance and probability density function combinations. We therefore propose approximation methods which make the method applicable for any distance function and bivariate location distribution.     

Assesment of dimethyl phthalate removal from aqueous phase using barium hexaferrite containing magnetic beads

The barium hexaferrite (BaFe(12)O(19)) containing magnetic poly (ethylene glycol dimethacrylate-vinyl pyridine; mag-poly [EGDMA-VP]) beads (average diameter=53-212 μm) were synthesized and characterized. Their use as an adsorbent in the removal of dimethyl phthalate (DMP) from an aqueous solution was investigated. The mag-poly (EGDMA-VP) beads were prepared by copolymerizing of 4-vinyl pyridine (VP) with ethylene glycol dimethacrylate (EGDMA). The mag-poly (EGDMA-VP) beads were characterized by N(2) adsorption/desorption isotherms (BET), vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), elemental analysis, scanning electron microscope (SEM), and swelling studies. At a fixed solid/solution ratio, the various factors affecting the adsorption of DMP from aqueous solutions such as pH, initial concentration, contact time, and temperature were analyzed. The maximum DMP adsorption capacity of the mag-poly (EGDMA-VP) beads was determined as 96.2 mg/g at pH 3.0, 25 °C. All the isotherm data can be fitted with both the Langmuir and the Dubinin-Radushkevich isotherm models. The pseudo-first-order, pseudo-second-order, Ritch-second-order, and intraparticle diffusion models were used to describe the adsorption kinetics. The thermodynamic parameters obtained indicated the exothermic nature of the adsorption. The DMP adsorption capacity did not change after 10 batch successive reactions, demonstrating the usefulness of the magnetic beads in applications.     

Fractional optimal control of a 2-dimensional distributed system using eigenfunctions

This paper presents an eigenfunctions expansion based scheme for Fractional Optimal Control (FOC) of a 2-dimensional distributed system. The fractional derivative is defined in the Riemann–Liouville sense. The performance index of a FOC problem is considered as a function of both state and control variables, and the dynamic constraints are expressed by a Partial Fractional Differential Equation (PFDE) containing two space parameters and one time parameter. Eigenfunctions are used to eliminate the terms containing space parameters and to define the problem in terms of a set of generalized state and control variables. For numerical computation Grünwald–Letnikov approximation is used. A direct numerical technique is proposed to obtain the state and the control variables. For a linear case, the numerical technique results into a set of algebraic equations which can be solved using a direct or an iterative scheme. The problem is solved for different number of eigenfunctions and time discretization. Numerical results show that only a few eigenfunctions are sufficient to obtain good results, and the solutions converge as the size of the time step is reduced.