Synthesis of neoglycopolymers by a combination of "click chemistry" and living radical polymerization

The synthesis of novel well-defined alkyne side chain functional polymers featuring narrow molecular weight distributions (PDI = 1.09-1.17) by living radical polymerization is described. Grafting of protected and unprotected carbohydrates is achieved via either a C-6 or an anomeric azide (alpha or beta) onto these polymers by Cu(I)-catalyzed "click chemistry", providing a simple and efficient route to synthetic glycopolymers. The strategy provides an extremely powerful tool for the synthesis of libraries of materials that differ only in the nature of the sugar moiety presented on a well-defined polymer scaffold. A library of multivalent ligands were then prepared following a "coclicking" synthetic protocol, and the reactivity of these glycopolymers in the presence of concanavalin A and Ricinus communis agglutinin, model lectins able to selectively bind appropriate mannose and galactose derivatives, respectively, was assessed.     

"Click" synthesis of small-molecule inhibitors targeting caspases

A panel of 198 P4-diversified aldehyde (reversible) and vinyl sulfone (irreversible) inhibitors is successfully synthesized via an efficient "click chemistry" platform and directly screened against caspase-3 and -7 for inhibition.     

Solid-phase synthesis of the 2(1H)-pyrazinone scaffold: a new approach toward diversely substituted heterocycles

The first solid-phase synthesis of the 2(1H)-pyrazinone scaffold is described. The diversity at position C6 of the pyrazinone ring is determined by the choice of the starting aldehyde. Microwave-enhanced transition metal-catalyzed reactions allow easy introduction of a variety of substituents at the C3 position. This opens a way for the generation of libraries of diversely substituted 2(1H)-pyrazinones that will be screened for biological activities.     

ParaCEST MRI contrast agents capable of derivatization via"click" chemistry

A comprehensive series of lanthanide chelates has been prepared with a tetrapropargyl DOTAM type ligand. The complexes have been characterized by a combination of (1)H NMR, single-crystal X-ray crystallography, CEST and relaxation studies and have also been evaluated for potential use as paramagnetic chemical exchange saturation transfer (ParaCEST) contrast agents in magnetic resonance imaging (MRI). We demonstrate the functionalization of several chelates by means of alkyne-azide "click" chemistry in which a glucosyl azide is used to produce a tetra-substituted carbohydrate-decorated lanthanide complex. The carbohydrate periphery of the chelates has a potent influence on the CEST properties as described herein.     

Synthesis of pyrazinone ring-containing opioid mimetics and examination of their opioid receptor-binding activity.

Cyclization of dipeptidyl chloromethyl ketones gave 6-(4-aminobutyl)-3-carboxyethyl-5-methyl-2(1H)-pyrazinone, 3-(4-aminobutyl)-6-carboxyethyl-5-methyl-2(1H)-pyrazinone, and 3,6-bis(4-aminobutyl)-5-methyl-2(1H)-pyrazinone, which were inserted into the enkephalin sequence to give opioid mimetics. Thus, it was confirmed that a pyrazinone ring can be easily inserted into a peptide sequence in order to evaluate structural components required for biologically active peptides.     

In situ Raman monitoring triazole formation from self-assembled monolayers of 1,4-diethynylbenzene on Ag and Au surfaces via "click" cyclization

We prepared acetylenyl-terminated aromatic self-assembled monolayers (SAMs) of 1,4-diethynylbenzene on silver and gold. After the fabrication of pendent acetylenyl SAMs, the formation of triazoles was performed via Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition "click" chemistry. A density functional theory (DFT) calculation of Raman frequencies showed good agreement with our experimental data to provide evidence of the formation of the triazole molecule. Our results indicated that "click" chemistry could be successfully applied to simple aromatic SAMs proximate (<1 nm) to roughened gold surfaces. The reaction process could be monitored in real time by measuring intensity changes of the nu(CC)(free) band in surface-enhanced Raman scattering (SERS) spectra.     

Characterisation of glycoprotein ligands synthesised using solid-phase combinatorial chemistry

A combination of rational design based on mimicking natural protein-carbohydrate interactions and solid-phase combinatorial chemistry has led to the identification of an affinity ligand which displays selectivity for the mannose moiety of glycoproteins. The ligand was initially identified as 32/18, a triazine scaffold substituted with 2-acetylpyrrole (32) and 5-aminoindan (18). However, characterisation of the immobilised ligand by release from the matrix via a cleavable linker, (4s,5s)-4,5-di(aminomethyl)-2,2-dimethyldioxolane, and using a non-destructive on-resin method, 13C NMR spectroscopy, confirmed that the putative ligand 32/18 was, in fact, 18/18, the disubstituted 5-aminoindan. 1H NMR studies on the interaction of alpha-D-methylmannoside with the ligand 18/18 in solution confirm the involvement of the hydroxyl group in the C-2 position.     

Cluster glycosides and heteroglycoclusters presented in alternative arrangements

Multivalent carbohydrates, or glycoclusters, are useful tools to study glycan-lectin and glycan-enzyme recognition processes and have wide potential therapeutic applicability. Herein, we report the synthesis of novel glycoclusters presenting glucopyranose units in alternate arrangements by coupling through the C-1, C-2, C-3 or C-6 sugar positions and using tetra- and hexa-valent scaffolds for multivalent display. Coupling the appropriate azide-functionalised d-glucopyranose units with alkynylated penta- or dipenta-erythritol central cores was accomplished via copper-catalysed azide-alkyne cycloaddition (CuAAC), yielding a panel of eight tetra- and hexa-valent glycoclusters in good yields (52–83%). This click chemistry strategy was extended to the preparation of four heteroglycoclusters using a tris(hydroxymethyl)-aminomethane (TRIS) central scaffold. One unit of either the conventional 1-deoxy-d-nojirymicin iminosugar or its’ C-5 epimeric l-gulo isomer, were incorporated along with three d-glucopyranose units linked through either C-1 or C-6.     

Synthesis and complexation of multiarmed cycloveratrylene-type ligands: observation of the "boat" and "distorted-cup" conformations of a cyclotetraveratrylene derivative

Investigations of a previously reported ligand, hexakis(2-pyridylmethyl)cyclotricatechylene (1), and a new tetrameric bridging ligand, octakis(2-pyridylmethyl)cyclotetracatechylene (2), the latter constructed on a larger cyclotetraveratrylene (CTTV) scaffold, are described. Variable-temperature NMR studies support a "sofa" conformation for 2, akin to studies on the parent compound. The coordination chemistry of 2 and its smaller trimeric homologue have also been investigated with silver(I), copper(II) and palladium(II) salts. An unexpected chelating mode was observed for 1 in the structure of DMF subset[Pd(3)Cl(6)(1)] x DMF, whereby the palladium cations bridge two veratrole subunits rather than chelating within a single subunit. In the structure of [Ag(4)(2)][Co(C(2)B(9)H(11))(2)](4) x 2.8 CH(3)CN x H(2)O, ligand 2 adopts a "boat" conformation, whereas in [Pd(4)Cl(8)(2)] x 4 H(2)O, (1)H NMR spectroscopic studies and calculations indicate that the ligand is present in a previously unobserved "distorted-cup" conformation. This conformation was calculated to be approximately 90 kJ mol(-1) lower in energy than the alternative "sofa" conformation. Thus, coordination-induced conformational control over CTTV derivatives offers new routes to exploit the host-guest chemistry of these compounds.     

First synthesis of "Majoral-Type" glycodendrimers bearing covalently bound alpha-D-mannopyranoside residues onto a hexachlocyclotriphosphazene core

A short and efficient strategy for the first synthesis of "Majoral-Type" multivalent glycodendrimers bearing covalently bound alpha-D-mannopyranosides onto a cyclotriphosphazene scaffold assembled using single-step Sonogashira and click chemistry is reported. New glycoclusters with valencies ranging from 6 to 18 and different epitope spatial arrangements were obtained. Cross-linking abilities of this series of glycodendrimers were evaluated with the model lectin from Canavalia ensiformis (Concanavalin A). The decameric mannoside 23, built around 19, was shown to be much faster in cross-linking the tetravalent lectin Concanavalin A than the positive control, which is the polysaccharide mannan from yeast. The new glycoconjugates reported may be promising tools as probes or effectors of biological processes involving multivalent carbohydrate-binding proteins.     

A new family of "clicked" estradiol-based low-molecular-weight gelators having highly symmetry-dependent gelation ability

Reported herein is the discovery of a novel family of "clicked" estradiol-based LMWGs whose gelation ability highly depends on the gelator symmetry. These LMWGs that gel different organic solvents in the presence of H(2)O even at concentrations as low as 0.04 wt% are readily accessible using "click" chemistry.     

Discovery of a sensitive Cu(II)-cyanide "off-on" sensor based on new C-glycosyl triazolyl bis-amino acid scaffold

A new functional glycosyl peptidomimetic, featuring a C-glucosyl 1,4-dimethoxynaphthalene backbone in conjugation with two triazolyl phenylalanine moieties on its adjacent C3,4-positions, was readily synthesized via click chemistry. Primary optical measurements indicated that the fluorescence of the ester form of this probe (4) could be selectively quenched by Pb(2+). In contrast, the fluorescence intensity of its analog 5 with released carboxylic groups was uniquely diminished by Cu(2+) with remarkably enhanced sensitivity and selectivity. Moreover, subsequent addition of cyanide to the methanol solution of the resulting Cu(2+)-5 complex induced its fluorescence recovery with a nanomolar detection limit, which was two orders of magnitude smaller than the regulated concentration limit of CN(-) in drinking water. This suggests the promising applicability of C-glycosyl bis-triazolyl amino acid scaffold in the future design and exploration of sensitive "off-on" Cu(II)-cyanide chemosensors.     

Click Inspired Synthesis of 1,2,3‐Triazole‐linked 1,3,4‐Oxadiazole Glycoconjugates

The glycoconjugation of biologically privileged 1,3,4‐oxadiazole scaffold is described via Cu(I)‐catalyzed azide–alkyne cycloaddition. A series of glycosyl alkynes 1b – i , obtained from various commercial sugars, were treated with azide functionalized 1,3,4‐oxadiazole using click chemistry to access triazole‐linked glycosylated 1,3,4‐oxadiazoles 10b – i in good yields. The structure of the developed glycoconjugates has been ascertained by extensive spectroscopic analysis (¹H &¹³C NMR, IR, and MS).     

Unusual deoxygenation and reactivity studies related to O6-(benzotriazol-1-yl)inosine derivatives

New and unusual developments related to the chemistry of O6-(benzotriazol-1-yl)inosine derivatives are reported. First, a simple, scalable method for their syntheses via the use of PPh3/I2/HOBt has been developed and has been mechanistically investigated by 31P(1H) NMR. Studies were then conducted into a unique oxygen transfer reaction between O6-(benzotriazol-1-yl)inosine nucleosides and bis(pinacolato)diboron (pinB-Bpin) leading to the formation of C-6 (benzotriazol-1-yl)purine nucleoside derivatives and pinB-O-Bpin. This reaction has been investigated by 11B(1H) NMR and compared to pinB-O-Bpin obtained by oxidation of pinB-Bpin. The structures of the C-6 (benzotriazol-1-yl)purine nucleosides have been unequivocally established via Pd-mediated C-N bond formation between bromo purine nucleosides and 1H-benzotriazole. Finally, short and extremely simple synthesis of 1,N6-ethano- and 1,N6-propano-2'-deoxyadenosine are reported in order to demonstrate the synthetic versatility of the O6-(benzotriazol-1-yl)inosine nucleoside derivatives for the assembly of relatively complex compounds.     

Robust, efficient, and orthogonal synthesis of dendrimers via thiol-ene "click" chemistry

Dendrimers up to the fourth generation were successfully prepared via the divergent growth strategy using a combination of thiol-ene "click" chemistry and traditional esterification reactions. The thiol-ene reactions were conducted under solvent-free, ambient conditions at room temperature by irradiating with UV light. The fourth-generation dendrimers were subsequently functionalized with carboxylic acid, pyrene, and Fmoc-protected cysteine moieties via thiol-ene reactions.     

Palladium-catalyzed copper(I)-mediated cross-coupling of arylboronic acids and 2(1H)-pyrazinones facilitated by microwave irradiation with simultaneous cooling

The application of a palladium-catalyzed Cu(I)-mediated Liebeskind-Srogl protocol for the decoration of the 2(1H)-pyrazinone scaffold resulted in significantly improved yields and rates when performed under microwave irradiation with simultaneous cooling.     

Polymer brushes grafted to "passivated" silicon substrates using click chemistry

We present herein a versatile method for grafting polymer brushes to passivated silicon surfaces based on the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition (click chemistry) of omega-azido polymers and alkynyl-functionalized silicon substrates. First, the "passivation" of the silicon substrates toward polymer adsorption was performed by the deposition of an alkyne functionalized self-assembled monolayer (SAM). Then, three tailor-made omega-azido linear brush precursors, i.e., PEG-N3, PMMA-N3, and PS-N3 (Mn approximately 20,000 g/mol), were grafted to alkyne-functionalized SAMs via click chemistry in tetrahydrofuran. The SAM, PEG, PMMA, and PS layers were characterized by ellipsometry, scanning probe microscopy, and water contact angle measurements. Results have shown that the grafting process follows the scaling laws developed for polymer brushes, with a significant dependence over the weight fraction of polymer in the grafting solution and the grafting time. The chemical nature of the brushes has only a weak influence on the click chemistry grafting reaction and morphologies observed, yielding polymer brushes with thickness of ca. 6 nm and grafting densities of ca. 0.2 chains/nm2. The examples developed herein have shown that this highly versatile and tunable approach can be extended to the grafting of a wide range of polymer (pseudo-) brushes to silicon substrates without changing the tethering strategy.     

Creation of 3,4-bis-triazolocoumarin-sugar conjugates via flourogenic dual click chemistry and their quenching specificity with silver(I) in aqueous media

Fluorogenic click chemistry has recently emerged as an ingenious and powerful tool toward numerous biochemical purposes. We describe herein the use of dual click chemistry toward the fluorescence restoration of a fluorogenic coumarin on epimeric dipropargyl sugar scaffolds and their practical utility in selective metal ion detection. The dual click reactions were smoothly proceeded under microwave irradiation between silylated 3,4-di-O-propynyl gluco- or galactoside and 3-azidocoumarin, forming fluorescently reactivated bis-triazolocoumarins on sugar templates. Subsequent desilylation resulted in the OH-glycosides with desired water solubility. The following photochemical study disclosed that their fluorescence could be uniquely quenched by silver(I) in aqueous media with very minor responses to the addition of other metal ions. This research would presumably prompt the efficient creation of water soluble and potentially low toxic chemosensors via the fluorogenic dual click chemistry in using the universally existent sugars as the central scaffold.     

Synthesis of 1,2,3-triazole derivatives and in vitro antifungal evaluation on Candida strains

1,2,3-Triazoles have been extensively studied as compounds possessing important biological activities. In this work, we describe the synthesis of ten 2-(1-aryl-1H-1,2,3-triazol-4-yl)propan-2-ols via copper catalyzed azide alkyne cycloaddition (CuAAc or click chemistry). Next the in vitro antifungal activity of these ten compounds was evaluated using the microdilution broth method against 42 isolates of four different Candida species. Among all tested compounds, the halogen substituted triazole 2-[1-(4-chlorophenyl)-1H-(1,2,3)triazol-4-yl]propan-2-ol, revealed the best antifungal profile, showing that further modifications could be done in the structure to obtain a better drug candidate in the future.     

"Thiol-ene" click chemistry: a facile and versatile route for the functionalization of porous polymer monoliths

The preparation of porous polymer monoliths with dodecyl and zwitterionic functionalities via the "thiol-ene" click chemistry of thiol-containing monoliths with both hydrophobic and polar methacrylate "ene" monomers has been demonstrated. Selected separations confirmed the excellent potential of these monoliths in chromatography.