Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Carboxylic acid functionalization of nylon 6 by radiation grafting and conversion to zinc salts: Effects on physical properties

 Functionalization of polymers by grafting monomeric species on to the backbone of molecular chains with the use of γ-radiation has been used extensively. In this work methacrylic acid was grafted onto a commercial grade of polycaproamide (Nylon 6) by preirradiating the polymer granules to 15 kGy at a rate of 1.0 kGy per hour and subsequently immersing these in a 10% aqueous solution of methacrylic acid in the presence of small quantities of FeSO₄ as homopolymerization inhibitor. The polymer was subsequently neutralized by mixing it with zinc acetylacetonate in a laboratory scale melt mixing device. The acid-grafting polymer modification resulted in an increase in glass transition temperature, while the addition of zinc acetylacetonate gave rise to two transitions: The lower transition corresponds to a miscible mixture of free polyamide and acid-grafted polymer, both plasticized with undecomposed zinc compound, while the upper transition corresponds to the zinc salt of the acid grafted polyamide. Through rheological measurements it was shown that both the acid-grafted polymer and the derived zinc salt have a branched structure, possibly containing also some crosslinked domains. Large improvements in solvent resistance were observed for both type of polymer modifications. Received: 13 December 1996 Accepted: 10 February 1997     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Sol–gel derived ZnO nanoparticulate films for ultraviolet photodetector (UV) applications

Zinc oxide nanoparticles based UV detector was fabricated on thermally oxidized silicon substrate. ZnO nanoparticle films were deposited using sol–gel route. The seed solution was prepared using two different solvents (methanol and isopropyl alcohol (IPA)). The surface morphology of the prepared films was characterized by FESEM. Structural characterization along with optical measurements was carried out using XRD and UV–vis spectroscopy. For the UV photo-detector, ZnO thin film prepared in IPA is selected based on their structural and optical analysis. The changes in photo-response of ZnO thin film with respect to time was studied under the dark and variable UV intensities. It was observed that the photocurrent increased with a factor of 4.82 under 1.16 mW of UV intensity. It is believe that the synthesized ZnO thin films have potential to use in the ultraviolet photo-detector applications.     

Synthesis and Biological Evaluation of Novobiocin Core Analogues as Hsp90 Inhibitors

Development of heat shock protein 90 (Hsp90) C‐terminal inhibitors has emerged as an exciting strategy for the treatment of cancer. Previous efforts have focused on modifications to the natural products novobiocin and coumermycin. Moreover, variations in both the sugar and amide moieties have been extensively studied, whereas replacements for the coumarin core have received less attention. Herein, 24 cores were synthesized with varying distances and angles between the sugar and amide moieties. Compounds that exhibited good anti‐proliferative activity against multiple cancer cell lines and Hsp90 inhibitory activity, were those that placed the sugar and amide moieties between 7.7 and 12.1 Å apart along with angles of 180°.     

Hydroxyalkylation of α-Phosphonylated α-Silylated Allylic Carbanions. An Unexpected Cyclization Reaction

Abstract

When reacted with aldehydes, in situ generated title carbanions 2 can give phosphonodienes (4 or 6), phosphonolactones (5 or 8) or phosphonoalcohols 7, depending on structure of reagents and on reaction conditions.     

Ultra Moisturizing Anti-Wrinkle Lotion Enriched with Tocotrienols

A stable palm-based anti-wrinkle lotion enriched with tocotrienols was successfully prepared. The stability of the product was due to the presence of liquid crystalline structure in the emulsion system. It helps in bringing the active to the dermis layer. Functionality active ingredients such as tocotrienols and anti-wrinkle were added in the formulation. A commercial plant extract was used to strengthen the collagen seated at the dermis layer. The product was formulated to pH 5.5 which is suitable for the skin. The mean droplet size is 10.2 µm with a monomodal distribution pattern which prevents agglomeration. This will decrease Brownian motion, thus prolonging its stability. Long-term acute moisturizing tests show a significant increase of between 24% and 17% hydration for five and six weeks respectively. The efficacy testing on 12 subjects confirmed a reduction in natural fine wrinkles on faces during aging or premature aging at ?7.6%.     

Solute alignment in liquid crystal solvents The Saupe ordering matrix for anthracene dissolved in uniaxial liquid crystals

Abstract

We have described a theory for U, the potential of mean torque of rigid solutes at infinite dilution in a uniaxial liquid crystal phase; this may be used to calculate (S _xx - S _yy) and S _zz, the principal elements of the Saupe ordering matrix. In its simplest form U(ω) contains only second-rank terms and the dependence of the biaxiality (S _xx - S _yy) is determined by ω, a parameter which describes the departure of the potential of mean torque from cylindrical symmetry, and is predicted to be temperature independent. If dispersion forces are responsible for the magnitude of the orientational order parameter then ω should be independent of the solvent and depend only on the anisotropy in the electric polarizability of the solute. Indeed, this independence should result for any pair potential which can be factorized into a product of solute and solvent properties. These predictions are tested here by determining values of S _zz and (S _xx - S _yy) for anthracene-d ₁₀ as a solute in several liquid crystal solvents, from the quadrupolar splittings obtained from the deuteron N.M.R. spectra. It is found that ω has a strong dependence on the nature of the solvent, which demonstrates that the solute ordering cannot be determined primarily by dispersion forces, or by a factorizable potential. There is also a weaker temperature dependence of λ observed for each binary mixture, and we show how this might be caused by a dependence of ω on solvent ordering, or by the inclusion of a fourth-rank term in U(ω).     

Numerical analysis of dual variable of conductivity in bioconvection flow of Carreau–Yasuda nanofluid containing gyrotactic motile microorganisms over a porous medium

Journal of Thermal Analysis and Calorimetry - The increasing need of the modern era of technology for better ways to increase the heat transfer performance of thermal systems has made nanoliquids...