Intramolecular fluorescence quenching in luminescent copolymers containing fluorenone and fluorene units: a direct measurement of intrachain exciton hopping rate

The quenching process of fluorescence emission in polyfluorene (PF) due to the presence of intramolecular 9-fluorenone (9 FL) moieties is studied in dilute toluene solution as a function of 9 FL content in eight copolymers containing both fluorene and fluorenone units (PF/FL(x)). The absorption spectrum of PF/FL(x) copolymers clearly shows a new absorption band, redshifted relatively to the PF and 9-fluorenone absorption, which increases in intensity when the fluorenone fraction increases and also decreases with solvent polarity. Fluorescence emission spectra of PF/FL(x) show that this redshifted and unstructured emission does not coincide with the 9-fluorenone emission and, with increasing solvent polarity, it further redshifts and decreases in intensity. An isoemissive point is clearly observed on the fluorescence emission spectra of PF/FL(x) as a function of fluorenone content, showing that the new emission band is formed at the expense of PF. We propose the formation of an intramolecular charge transfer complex (ICTC) between PF units and 9-fluorenone to explain the appearance of the new emission band. Global analysis of time resolved fluorescence decays collected at 415 nm (PF emission) and 580 nm (the ICTC emission) show that three exponentials are generally needed to achieve excellent fits. Two of the components (420 ps and 6.5 ns) are independent of 9-fluorenone fraction. A further fast component is strongly dependent on fluorenone fraction and ranges between 280 and 70 ps. This component appears as a decay time at 415 nm and as a rise time at 580 nm and is ascribed to the migration of exciton to quenching sites (formation of intramolecular CT complex or exciton ionization at CT complex). A kinetic mechanism involving three different kinetic species, quenched PF units kinetically coupled with the ICTC complex, and unquenched PF units is proposed to explain the experimental data and the quenching rate constant is obtained, k(1) congruent with 10(11) s(-1). This is an experimental measurement of the intrachain exciton hopping rate.     

The determination of sulphuric acid in air: A specific method

Summary A new method for the measurement of sulphuric acid in airborne particulates is described. Sulphuric acid present is separated from the sample matrix by microdiffusion at 200°. The separated sulphuric acid is absorbed in sodium hydroxide, and titrated by barium perchlorate.

---

Zusammenfassung Ein Verfahren zur Bestimmung von Schwefelsäure als Verunreinigung der Atmosphäre wurde beschrieben. Die Abtrennung von der Luftprobe erfolgt durch Mikrodiffusion bei 200° C. Die Schwefelsäure wird in Natronlauge absorbiert und mit Bariumperchlorat titriert.

     

Carbazole compounds as host materials for triplet emitters in organic light-emitting diodes: polymer hosts for high-efficiency light-emitting diodes

A carbazole homopolymer and carbazole copolymers based on 9,9'-dialkyl-[3,3']-bicarbazolyl, 2,5-diphenyl-[1,3,4]-oxadiazole and 9,9-bis(4-[3,7-dimethyloctyloxy]phenyl)fluorene were synthesized and their electrical and photophysical properties were characterized with respect to their application as host in phosphorescent polymer light-emitting diodes. It is shown that the triplet energy of a polymer depends on the specific connections between its building blocks. Without changing the composition of the polymer, its triplet energy can be increased from 2.3 to 2.6 eV by changing the way in which the different building blocks are coupled together. For poly(9-vinylcarbazole) (PVK), a carbazole polymer often used as host for high-energy triplet emitters in polymer light-emitting diodes, a large hole-injection barrier of about 1 eV exists due to the low-lying HOMO level of PVK. For all carbazole polymers presented here, the HOMO levels are much closer to the Fermi level of a commonly used anode such as ITO and/or a commonly used hole-injection layer such as PEDOT:PSS. This makes high current densities and consequently high luminance levels possible at moderate applied voltages in polymer light-emitting diodes. A double-layer polymer light-emitting diode is constructed comprising a PEDOT:PSS layer as hole-injection layer and a carbazole-oxadiazole copolymer doped with a green triplet emitter as emissive layer that shows an efficacy of 23 cd/A independent of current density and light output.     

Characterization of the triplet state of tris(8-hydroxyquinoline)aluminium(III) in benzene solution

The lowest triplet state of tris(8-hydroxyquinoline)aluminium(III) (Alq3) has been prepared by pulse radiolysis/energy transfer from appropriate donors in benzene solutions and has an absorption maximum around 510 nm with a lifetime of about 50 mus. It is quenched by molecular oxygen, leading to singlet oxygen formation. From flash photolysis and singlet oxygen formation measurements, a quantum yield of triplet formation of 0.24 was determined for direct photolysis of the complex. A value of 2.10 +/- 0.10 eV was determined for the energy of the lowest triplet state by energy transfer studies and was confirmed by phosphorescence measurements on Alq3, either in the heavy atom solvent ethyl iodide or photosensitized by benzophenone in benzene. Dexter (exchange) energy transfer was observed from triplet Alq3 to platinum(II) octaethylporphyrin.     

Spin dynamics in conducting polymers studied by μSR

We report studies of spin dynamics in the conducting polymers polyaniline and polypyrrole using both μ⁺SR and μ^-SR techniques. These measurements reveal characteristic field dependences and cutoff frequencies for the muon spin relaxation which can be related to the spin diffusion process. Clear evidence is seen for increased spin localisation at low temperatures where a crossover occurs from two or three dimensional spin diffusion to a one dimensional diffusion regime. This revised version was published online in August 2006 with corrections to the Cover Date.     

Long range energy transfer in conjugated polymer sequential bilayers

Steady-state and time-resolved photoluminescence have been used to investigate the optical properties of bilayer and blend films made from poly(9,9-dioctyl-fluorene-2,7-diyl) (PFO) and poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH PPV). Energy transfer has been observed in both systems. From steady-state photoluminescence measurements, the energy transfer was characterized by the effective enhancement of the MEH PPV emission intensity after exciting the donor states. Relatively faster decays for the PFO donor emission have been observed in the blends as well as in the bilayer structures, confirming effective energy transfer in both structures. In contrast to the bilayers, the time decay of the acceptor emission in the blends presents a long decay component, which was assigned to the exciplex formation in these samples. For the blends the acceptor emission is in fact a composition of exciplex and MEH PPV emissions, the later being due to Fo?rster energy transfer from PFO. In the bilayers, the exciplex is not observed and temperature dependence photoluminescence measurements show that exciton migration has no significant contribution to the energy transfer. The efficiency and very long range of the energy transfer in the bilayers is explained assuming a surface-surface interaction geometry where the donor/acceptor distances involved are much longer than the common Fo?rster radius.     

Direct conjugation of semiconductor nanocrystals to a globular protein to study protein-folding intermediates

In this Article, we study the development of semiconductor nanocrystals (quantum dots of average diameter less than 2 nm) directly conjugated to a transporter protein human serum albumin (HSA) as fluorescent biological labels. F?rster resonance energy transfer (FRET) from the amino acid tryptophan (Trp214) to quantum dot in HSA is monitored to follow the local and global changes in the protein structure during thermal unfolding and refolding processes. This study is likely to attract widespread attention as a powerful tool for the study of protein folding.     

Precise mass measurement of a double-stranded 500 base-pair (309 kDa) polymerase chain reaction product by negative ion electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS) has been used to determine the mass of a double-stranded 500 base-pair (bp) polymerase chain reaction (PCR) product with an average theoretical mass of the blunt-ended (i.e. unadenylated) species of 308 859.35 Da. The PCR product was generated from the linearized bacteriophage Lambda genome which is a double-stranded template. Utilization of ethanol precipitation in tandem with a rapid microdialysis step to purify and desalt the PCR product was crucial to obtain a precise mass measurement. The PCR product (0.8 pmol/μL) was electrosprayed from a solution containing 75% acetonitrile, 25 mM piperidine, and 25 mM imidazole and was infused at a rate of 200 nL/min. The average molecular mass and the corresponding precision were determined using the charge-states ranging from 172 to 235 net negative charges. The experimental mass and corresponding precision (reported as the 95% confidence interval of the mean) was 309 406 +/- 27 Da (87 ppm). The mass accuracy was compromised due to the fact that the PCR generates multiple products when using Taq polymerase due to the non-template directed 3'-adenylation. This results in a mixture of three PCR products with nearly identical mass (i.e. blunt-ended, mono-adenylated and di-adenylated) with unknown relative abundances that were not resolved in the spectrum. Thus, the experimental mass will be a weighted average of the three species which, under our experimental conditions, reflects a nearly equal concentration of the mono- and di-adenylated species. This report demonstrates that precise mass measurements of PCR products up to 309 kDa (500 bp) can be routinely obtained by ESI-FTICR requiring low femtomole amounts. Copyright 1999 John Wiley & Sons, Ltd.