Self-organized ZnAl2O4 nanostructures grown on -sapphire

Self-organized ZnAl₂O₄ nanostructures with the appearance (in SEM) of high aspect ratio horizontal nanowires are grown on uncatalysed c-sapphire by vapour phase transport. The nanostructures grow as three equivalent crystallographic variants on c-sapphire. Raman and cathodoluminescence spectroscopy confirm that the nanostructures are not ZnO and TEM shows that they are the cubic spinel, zinc aluminate, ZnAl₂O₄, formed by the reaction of Zn and O with the sapphire substrate.     

Measurement of resistant starch by enzymatic digestion in starch and selected plant materials: collaborative study

Interlaboratory performance statistics was determined for a method developed to measure the resistant starch (RS) content of selected plant food products and a range of commercial starch samples. Food materials examined contained RS (cooked kidney beans, green banana, and corn flakes) and commercial starches, most of which naturally contain, or were processed to yield, elevated RS levels. The method evaluated was optimized to yield RS values in agreement with those reported for in vivo studies. Thirty-seven laboratories tested 8 pairs of blind duplicate starch or plant material samples with RS values between 0.6 (regular maize starch) and 64% (fresh weight basis). For matrixes excluding regular maize starch, repeatability relative standard deviation (RSDr) values ranged from 1.97 to 4.2%, and reproducibility relative standard deviation (RSDR) values ranged from 4.58 to 10.9%. The range of applicability of the test is 2-64% RS. The method is not suitable for products with <1% RS (e.g., regular maize starch; 0.6% RS). For such products, RSDr and RSDR values are unacceptably high.     

Composites of poly(ε‐caprolactone) and Mo6S3I6 Nanowires

Composites of poly(ε‐caprolactone) (PCL) and molybdenum sulfur iodine (MoSI) nanowires were prepared using twin‐screw extrusion. Extensive microscopic examination of the composites revealed the nanowires were well dispersed in the PCL matrix, although bundles of Mo₆S₃I₆ ropes were evident at higher loadings. Secondary electron imaging (SEI) showed the nanowires had formed an extensive network throughout the PCL matrix, resulting in increased electrical conductivity of PCL, by eight orders of magnitude, and an electrical percolation threshold of 6.5 × 10^?3 vol%. Thermal analysis (DSC), WAXD, and hot stage polarized optical microscopy (HSPOM) experiments revealed Mo₆S₃I₆ addition altered PCL crystallization kinetics, nucleation density, and crystalline content. A greater number of smaller spherulites were formed via heterogeneous nucleation. The onset of thermal decomposition (TGA) of PCL decreased by 70°C, a consequence of the thermal degradation of Mo₆S₃I₆ to MoO₃, which in turn accelerates the formation of volatile gases during the first stage of PCL decomposition. Copyright © 2010 John Wiley & Sons, Ltd.     

Local strain and defects in silicon wafers due to nanoindentation revealed by full‐field X‐ray microdiffraction imaging

Quantitative characterization of local strain in silicon wafers is critical in view of issues such as wafer handling during manufacturing and strain engineering. In this work, full‐field X‐ray microdiffraction imaging using synchrotron radiation is employed to investigate the long‐range distribution of strain fields in silicon wafers induced by indents under different conditions in order to simulate wafer fabrication damage. The technique provides a detailed quantitative mapping of strain and defect characterization at the micrometer spatial resolution and holds some advantages over conventional methods.     

Characterization of the carrot defect in 4H-SiC epitaxial layers

Characterization of the epitaxial defect known as the carrot defect was performed in thick 4H-SiC epilayers. A large number of carrot defects have been studied using different experimental techniques such as Nomarski optical microscopy, KOH etching, cathodoluminescence and synchrotron white beam X-ray topography. This has revealed that carrot defects appear in many different shapes and structures in the epilayers. Our results support the previous assignment of the carrot defect as related to a prismatic stacking fault. However, we have observed carrot defects with and without a visible threading dislocation related etch pit in the head region, after KOH etching. Polishing of epilayers in a few μm steps in combination with etching in molten KOH and imaging using Nomarski optical microscope has been used to find the geometry and origin of the carrot defects in different epilayers. The defects were found to originate both at the epi-substrate interface and during the epitaxial growth. Different sources of the carrot defect have been observed at the epi-substrate interface, which result in different structures and surfaces appearance of the defect in the epilayer. Furthermore, termination of the carrot defect inside the epilayer and the influence of substrate surface damage and growth conditions on the density of carrot defects are studied.     

Pyridylphosphonium salts as alternatives to cyanopyridines in radical–radical coupling reactions

Radical couplings of cyanopyridine radical anions represent a valuable technology for functionalizing pyridines, which are prevalent throughout pharmaceuticals, agrochemicals, and materials. Installing the cyano group, which facilitates the necessary radical anion formation and stabilization, is challenging and limits the use of this chemistry to simple cyanopyridines. We discovered that pyridylphosphonium salts, installed directly and regioselectively from C–H precursors, are useful alternatives to cyanopyridines in radical–radical coupling reactions, expanding the scope of this reaction manifold to complex pyridines. Methods for both alkylation and amination of pyridines mediated by photoredox catalysis are described. Additionally, we demonstrate late-stage functionalization of pharmaceuticals, highlighting an advantage of pyridylphosphonium salts over cyanopyridines.

Cyanopyridines form dearomatized radical anions upon single-electron reduction and participate in photoredox coupling reactions. Pyridylphosphonium salts replicate that reactivity with a broader scope and increase the utility of these processes.

Modern photoredox catalysis and electrochemistry have enabled new synthetic methods that proceed via open-shell intermediates.¹ Under this regime, pyridine functionalization strategies have been developed where 4-cyanopyridines undergo single-electron reduction to form dearomatized radical species that couple with other stabilized radicals (Scheme 1A).² The cyano group is critical for efficient reactivity via pyridyl radical anions; alternatives such as 4-halopyridines more readily undergo elimination to pyridyl radicals after single-electron reduction resulting in a distinct set of coupling processes.³ We aimed to show that pyridylphosphonium salts could replicate the reactivity of cyanopyridines and allow a broader set of inputs into dearomatized pyridyl radical coupling reactions.⁴Open in a separate windowScheme 1Expansion of radical coupling reactions to complex pyridines.Cyanopyridines have facilitated pyridine alkylation, allylation, and alkenylation reactions providing access to valuable building blocks for medicinal and agrochemical programs.⁵ The cyano group is essential for these methods, but a problem arises when applying this chemistry to complex pyridines, such as those found in pharmaceutical and agrochemical candidates. These structures are often devoid of pre-installed functional groups, and it is often challenging to install a cyano group from C–H precursors regioselectively.⁶ We envisioned pyridylphosphonium salts, regioselectively constructed from the C–H bonds of a diverse set of pyridines, could serve as alternatives to cyanopyridines.⁷ Herein, we report couplings between alkyl BF₃K salts and preliminary studies of carboxylic acids and amines with pyridylphosphonium salts, including late-stage functionalization of complex pyridine-containing pharmaceuticals using this strategy.Recently, we reported a radical coupling reaction between a boryl-stabilized cyanopyridyl radical and a boryl-stabilized pyridylphosphonium radical.^7a The intermediate radicals arose via an unusual inner-sphere process that would be difficult to extend to other coupling reactions. A significant advance would be to show that pyridylphosphonium salts could function more generally as radical anion precursors and mimic the reactivity of cyano-pyridines. In particular, showing their viability in photoredox and electrochemical processes would translate to numerous synthetic transformations. To demonstrate this principle, we envisioned a redox-neutral alkylation reaction (Scheme 1B) via a radical coupling between radical zwitterion I, formed through single-electron reduction of a pyridylphosphonium salt (E^red_p/2 = −1.51 V vs. SCE) and benzyl radical II, resulting from single-electron oxidation of a BF₃K salt (E^red = +1.10 V vs. SCE for a primary benzylic salt).⁸ Loss of triphenylphosphine from dearomatized intermediate (III) would furnish the alkylated pyridine product. Notably, the redox events could invert, where the photocatalyst oxidizes the BF₃K salt first and reduces the pyridylphosphonium salt second, broadening the scope of amenable photocatalysts.We began our investigation by examining a series of photocatalysts for the coupling reaction of phosphonium salt 1a, formed with complete regioselectivity for the 4-position from 2-phenylpyridine, and benzylic BF₃K salt 2a under irradiation from a 455 nm Kessil light (Scheme 1B are potentially interchangeable.^1b The Adachi-type photocatalyst 3DPAFIPN improved the yield to 77% with a further increase to 82% after increasing the reaction concentration (entries 3 and 4). Adding 2,6-lutidine, previously shown as an effective additive for photoredox cross-coupling reactions of BF₃K salts by the Molander group,⁹ had no impact on the yield of 2-phenylpyridine salt 1a (entry 5) and the [Ir(ppy)₂(dtbbpy)]PF₆ catalyst was marginally less efficient under the same conditions (entry 6). We observed that 2,6-lutidine did substantially improve the yield when isomeric 3-Ph salt 1b was employed (entries 7 and 8); without 2,6-lutidine, the crude ¹H NMR indicates significant amounts of decomposition occurred, including 3-phenylpyridine, and the 4- vs. 2-position product ratio was 3 : 1. This outcome suggests that protiodephosphination and non-selective Minisci-type pathways can occur under these conditions. With 2,6-lutidine, the crude reaction pathway is cleaner, and the 4- vs. 2-position ratio improved to 8 : 1. At this point, we have not established the role of 2,6-lutidine, although it is conceivable that it reacts with BF₃ produced as the reaction progresses. In 2-substituted systems, steric hindrance around the pyridine N-atom of the salt would deter BF₃-coordination, whereas, in 3-substituted systems, such as salt 1b, coordination is more likely and may have a deleterious effect on the reaction (vide infra). Given the structural variation of pyridines that we anticipated applying to this process and how those structures could impact boron speciation during the reaction, we elected to use 2,6-lutidine as an additive in all subsequent reactions.¹⁰Optimization of pyridine alkylation, photocatalyst data and effect of BF₃·OEt₂ as an additive^a

EPR Studies of Tl0.5Pb0.5Sr1.6Ba0.4CaCu2?xRuxO7?δ Superconductor

Bulk superconducting samples of type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ, (Tl, Pb)/Sr-1212, with 0.0 ≤ x ≤ 0.525 were prepared by the conventional one-step solid-state reaction technique. The prepared samples were investigated using X-ray powder diffraction, electrical resistivity and electron paramagnetic resonance (EPR) measurements. Enhancement of the phase formation, superconducting transition temperature T _c and hole carriers concentration P was observed up to x = 0.075. For x > 0.075, a reverse trend was observed. EPR spectra were measured at different temperatures (120–290 K) for all prepared samples. The number of spins N participating in the resonance and the paramagnetic susceptibility χ were calculated as a function of both Ru-content and temperature. N and χ increased as the Ru-content increased. A linear relationship between logN and 1/T was established, from which the activation energy E _a was calculated as a function of the Ru-content. The temperature dependence of χ was fitted according to Curie–Weiss type of magnetic behavior. Curie constant C, Curie temperature θ, the effective magnetic moment μ and the electronic specific heat γ were estimated as a function of the Ru-content.     

Evaluation of direct analysis in real time mass spectrometry for onsite monitoring of batch slurry reactions

Batch slurry reactions are widely used in the industrial manufacturing of chemicals, pharmaceuticals, petrochemicals and polymers. However, onsite monitoring of batch slurry reactions is still not feasible in production plants due to the challenge in analyzing heterogeneous samples without complicated sample preparation procedures. In this study, direct analysis in real time mass spectrometry (DART-MS) has been evaluated for the onsite monitoring of a model batch slurry reaction. The results suggested that automation of the sampling process of DART-MS is important to achieve quantitative results. With a sampling technique of manual sample deposition on melting point capillaries followed by automatic sample introduction across the helium beam, relative standard deviation (RSD) of the protonated molecule signals from the reaction product of the model batch slurry reaction ranged from 6 to 30%. This RSD range is improved greatly over a sampling technique of manual sample deposition followed by manual sample introduction where the RSDs are up to 110%. Furthermore, with the semi-automated sampling approach, semi-quantitative analysis of slurry samples has been achieved. Better quantification is expected with a fully automated sampling approach.