Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

First artificial receptors and chemosensors toward phosphorylated peptide in aqueous solution

The first fluorescent chemosensors toward a native phosphorylated peptide are successfully synthesized. Dinuclear zinc(II)-dipicolylamine-based anthracene (1, 2) can selectively recognize and sense phosphorylated species with an increase in the fluorescence intensity. We also demonstrated that these artificial receptors fluorometrically detect a phosphorylated peptide with high affinity (>107 M-1) in aqueous solution.     

Synthesis and characterization of soluble polymides from 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene and aromatic tetracarboxylic dianhydrides

2,5-Bis(4-aminophenyl)-3,4-diphenylthiophene, a polyimide-forming monomer, was prepared in three steps starting from benzyl chloride and sulfur. Novel polyimides were synthesized from the diamine and pyromellitic dianhydride or 3,3′, 4,4′-benzophenonetetracarboxylic dianhydride (BTDA). Polymerization was carried out either by the usual two-step procedure that included ring-opening polyaddition giving polyamic acids, followed by cyclodehydration to polyimides, or by the direct one-pot procedure involving cyclodehydration in situ. The polyimide derived from the diamine and BTDA, especially that prepared by the one-pot procedure in m-cresol containing isoquinoline, is soluble in various organic solvents and gave a yellow, transparent, tough, and flexible film. Solubility of this polyimide varied by the preparative method and by the copolymerization with bis(4-aminophenyl) ether. All the polyimides are highly thermally stable and exhibited no appreciable decomposition up to 450°C in air and nitrogen atmospheres.     

Preparation and properties of aromatic polyamides from 5-t-butylisophthalic acid and various aromatic diamines

Aromatic polyamides (aramids) having pendant t-butyl group were synthesized by the direct polycondensation of 5-t-butylisophthalic acid with various aromatic diamines in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The aramids having inherent viscosities of 0.6–2.4 dL/g were obtained in quantitative yields. These polymers were readily soluble in various solvents such as NMP,N,N-dimethylacetamide, dimethyl sulfoxide, and pyridine, and gave transparent, tough and flexible films by casting from the NMP solutions. The aramids had glass transition temperatures between 250 and 330°C, and started to lose weight around 350°C, with 10% weight loss being recorded at about 450°C in air.     

Preparation and properties of polyarylates from 5-t-butylisophthaloyl chloride and various bisphenols

Polyarylates containing a t-butyl pendant group were prepared from 5-t-butylisophthaloyl chloride and various bisphenols through the phase-transfer catalyzed two-phase polycondensation. The polyarylates having inherent viscosities up to 3.1 dL/g were obtained quantitatively. They were readily soluble in various solvents such as chloroform, m-cresol, and pyridine. Coloreless, transparent, and flexible films could be cast from the chloroform solutions of the polymers. The polyarylates had glass transition temperatures between 210 and 320°C, and did not lose weight below 350°C, with 10% weight loss being recorded at 395–450°C in air.     

A facile synthesis of aliphatic polybenzoxazoles from a bis(o-aminophenol) or its hydrochloride and aliphatic dinitriles

A facile one-step method for the synthesis of aliphatic polybenzoxazoles has been developed. Thus, a series of aliphatic polybenzoxazoles having inherent viscosities of 0.2–0.7 dL/g in concentrated sulfuric acid were successfully synthesized by the melt polycondensation of alipatic dinitriles with 4,4′-diamino-3,3′-dihydroxybiphenyl (AHB) or its hydrochloride (AHB–HCl) with the elimination of ammonia or ammonium chloride, respectively. Monomer AHB–HCl was more reactive than the parent AHB, thereby affording higher molecular weight polybenzoxazoles in a shorter reaction time. The aliphatic polybenzoxazoles having 6–10 methylene units were highly crystalline with melting temperatures in the range of 187–308°C, which were stable up to 400°C in a melt state in nitrogen. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

Preparation and properties of aromatic copolyamides from aromatic diisocyanates and aromatic dicarboxylic acids

Wholly aromatic random copolyamides of high molecular weights were prepared by the high-temperature solution polycondensation of an aromatic diisocyanate, 4,4′-methylenedi(phenyl isocyanate) or 2,4-tolylene diisocyanate, with a mixture of isophthalic acid and 4,4′-oxydibenzoic acid. Glass transition temperatures of the polyamides and copolyamides were between 229 and 273°C; this depended on the combination of diisocyanates and dicarboxylic acids used. These aromatic copolyamides showed better solubility in various organic solvents and reduced crystallinity, compared to the corresponding homopolyamides. The copolyamides prepared from 2,4-tolylene diisocyanate had greater solubility and higher glass transition temperatures than those obtained from 4,4′-methylenedi(phenyl isocyanate).