Performance evaluation of PVdF gel polymer electrolytes

A series of gel polymer electrolytes containing PVdF as homo polymer, a mixture of 1:1 Ethylene Carbonate (EC) : Propylene Carbonate (PC) as plasticizer and lithium-bistrifluoromethane sulphone imide [imide — LiN (CF₃SO₂)₂] has been developed. Amounts of polymer (PVdF), plasticizer and the imide lithium salt have been varied as a function of their weight ratio composition in this regard. Dimensionally stable films possessing appreciable room temperature conductivity values have been obtained with respect to certain weight ratio compositions. However, conductivity data have been recorded at different possible temperatures, i.e., from 20 °C to 65 °C. XRD and DSC studies were carried out to characterize the polymer films for better amorphicity and reduced glass transition temperature, respectively. The electrochemical interface stability of the PVdF based gel polymer electrolytes over a range of storage period (24 h – 10 days) have been investigated using A.C. impedance studies. Test cells containing Li/gel polymer electrolyte (GPE)/Li have been subjected to undergo 50 charge-discharge cycles in order to understand the electrochemical performance behaviour of the dimensionally stable films of superior conductivity. The observed capacity fade of less than 20% even after 50 cycles is in favour of the electrochemical stability of the gel polymer electrolyte containing 27.5% PVdF −67.5 % EC+PC −5% imide salt. Cyclic voltammetry studies establish the possibility of a reversible intercalation — deintercalation process involving Li⁺ ions through the gel polymer electrolyte.     

A simple TiCl4 promoted arylation of orthoformate and benzyl ethers by N,N-dialkylarylamines

N,N-Dialkylarylamines react with trimethyl orthoformate and TiCl₄ under ambient conditions to give the corresponding formyl derivatives in 75-89% yields, whereas the corresponding arylated products are obtained from benzyl ethers and acetals in 42-78% yields.     

A simple,direct synthesis of Na2Fe(CO)4

Summary Reduction of anhydrous FeCl₃ in THF with sodium naphthalenide under a CO atmosphere at room temperature leads directly to Na₂Fe(CO)₄, which on reaction with alkyl bromides gives the corresponding aldehydes, ketones and carboxylic acids under appropriate conditions.     

A novel arylation of arylacetic acid esters using tertiary arylamines and TiCl4

The reactions of arylacetic acid esters with tertiary arylamines in the presence of TiCl₄ give α-arylated products in 65-90% yields, as well as 10-20% yields of the corresponding benzidines.     

The T3 (π, π) State of acridine

The 00 band maximum of the transition T₃(π, π^*) ← T₁ (π, π^*) of acridine occurs at ≈ 10200 ± 20 cm^?1 in inert (n-hexane, benzene, CCl₄), at 10220 ± 20 cm^?1 in polar (acetonitrile) and at 10170 ± 50 cm^?1 in hydrogen-bonding (methanol, 2-propanol and alkaline water) solvents. Based on the solvent-independent energy of T₁ (π, π^*), the T₃(π, π^*) state of acridine is estimated at 26050 ± 50 cm^?1 in all the solvents.     

Thermodynamic and strain effects in the competition between 5-exo-dig and 6-endo-dig cyclizations of vinyl and aryl radicals

Electronic and structural factors controlling the competition between 5-exo-dig and 6-endo-dig cyclizations of sp2-radicals were analyzed using a combination of available experimental data and computation. Although the stereoelectronically favored 5-exo pathways usually has the lower activation energy, formation of a new aromatic ring not only makes the 6-endo process favorable thermodynamically in conjugated systems but also lowers its activation barrier to the extent where the 5-exo/6-endo selectivity is controlled by subtle factors such as the different sensitivity of the two pathways to strain effects in polycyclic systems. In particular, the stronger sensitivity of the 5-exo pathway to strain leads to a crossover in selectivity. The 6-endo cyclization is kinetically favored in smaller (and strained) cycles, whereas the 5-exo cyclization has lower barriers in the larger rings.     

Growth and characterization of 0.1 and 0.25 zinc magnesium ammonium sulphate

Mixed crystals of 0.1 and 0.25 zinc magnesium ammonium sulphate were grown by slow evaporation of aqueous solution at room temperature. The bright and transparent crystals obtained were characterized by thermal (TG–DTA), FTIR and XRD analyses. A fitting decomposition pattern for the compound was formulated on the TG curve which shows two stage mass losses between 133 and 478.75 °C. In this temperature range, DTA curve shows exothermic peaks supporting the formulated decomposition pattern. The FTIR spectra show the vibration frequencies due to the formation of zinc magnesium ammonium sulphate mixed crystals. Detailed structural analysis of the compound is under progress.     

Growth and characterization of nonlinear optical material: l-alanine thiourea

The title compound of l-alanine thiourea, a semi organic material, has been grown from slow evaporation solution growth technique at room temperature. It is a potential material for nonlinear optical applications. The grown single crystals have been analyzed using powder X-ray diffraction. It belongs to monoclinic crystal system, and its lattice dimensions were determined. The presence of functional groups was identified from FTIR spectral analysis. The title compound has good optical transmission in the entire visible region. Thermal stability of the grown crystal was investigated by thermogravimetric and differential thermal analysis.