Synthesis and structure of nanocrystalline TiO2 with lower band gap showing high photocatalytic activity

Nanocrystalline TiO2 was synthesized by the solution combustion method using titanyl nitrate and various fuels such as glycine, hexamethylenetetramine, and oxalyldihydrazide. These catalysts are active under visible light, have optical absorption wavelengths below 600 nm, and show superior photocatalytic activity for the degradation of methylene blue and phenol under UV and solar conditions compared to commercial TiO2, Degussa P-25. The higher photocatalytic activity is attributed to the structure of the catalyst. Various studies such as X-ray diffraction, Raman spectroscopy, Brunauer-Emmett-Teller surface area, thermogravimetric-differential thermal analysis, FT-IR spectroscopy, NMR, UV-vis spectroscopy, and surface acidity measurements were conducted. It was concluded that the primary factor for the enhanced activity of combustion-synthesized catalyst is a larger amount of surface hydroxyl groups and a lowered band gap. The lower band gap can be attributed to the carbon inclusion into the TiO2 giving TiO(2-2x)C(x) VO2**.     

Kinetics of thermal degradation of poly(-caprolactone)

The thermal degradation/modification dynamics of poly(-caprolactone) (PCL) was investigated in a thermogravimetric analyzer under non-isothermal and isothermal conditions. The time evolution of the molecular weight distribution during degradation was studied using gel permeation chromatography. Experimental molecular weight evolution and weight loss profile were modeled using continuous distribution kinetics. The degradation exhibited distinctly different behavior under non-isothermal and isothermal heating. Under non-isothermal heating, the mass of the polymer remained constant at initial stages with rapid degradation at longer times. The Friedman and Chang methods of analysis showed a 3-fold change (from 18 to 55–62 kcal mol⁻¹) in the activation energy from low temperatures to high temperatures during degradation. This suggested the governing mechanism changes during degradation and was explained using two parallel mechanisms (random chain scission and specific chain end scission) without invoking the sequential reaction mechanisms. Under isothermal heating, the polymer degraded by pure unzipping of specific products from the chain end.     

Numerical and similarity solutions for reversible population balance equations with size-dependent rates

Population balance equations (PBEs) for reversible aggregation-fragmentation processes are important to particle agglomeration and dissolution, polymerization and degradation, liquid droplet coalescence and breakup, and floc coagulation and disintegration. Moment solutions provide convenient solutions to the PBEs, including steady state and similarity solutions, but may not be feasible for complex forms of size-dependent rate coefficients and stoichiometric kernels. Numeric solutions are thus necessary not only for applications, but also for the study of the mathematics of PBEs. Here we propose a numerical method to solve PBEs and compare the results to moment solutions. The numeric results are consistent with known steady state and asymptotic long-time similarity solutions and show how processes can be approximated by self-similar formulations.     

Synthesis and photocatalytic activity of poly(3-hexylthiophene)/TiO2 composites

An heterogeneous conducting polymer composite, poly(3-hexylthiophene)/TiO₂ (P3HT/TiO₂), was synthesized. The photocatalytic activity of P3HT alone and the composite was investigated for the first time by degrading a common dye under UV exposure. It was shown that the photocatalytic activity of the nanocomposites was higher compared to either the polymer or TiO₂ alone. A simple mechanism was proposed to explain this observed synergetic effect.     

Temperature effects for isothermal polymer crystallization kinetics

We adopt the cluster size distribution model to investigate the effect of temperature on homogeneous nucleation and crystal growth for isothermal polymer crystallization. The model includes the temperature effects of interfacial energy, nucleation rate, growth and dissociation rate coefficients, and equilibrium solubility. The time dependencies of polymer concentration, number and size of crystals, and crystallinity (in Avrami plots) are presented for different temperatures. The denucleation (Ostwald ripening effect) is also investigated by comparing moment and numerical solutions of the population balance equations. Agreement between the model results and temperature-sensitive experimental measurements for different polymer systems required strong temperature dependence for the crystal-melt interfacial energy.     

Strategic arrivals to queues offering priority service

Queueing Systems - We consider strategic arrivals to a FCFS service system that starts service at a fixed time and has to serve a fixed number of customers, for example, an airplane boarding...     

Synthesis,characterization, and antimicrobial activity of new benzofuran derivatives

Russian Journal of General Chemistry - A novel series of (5-substituted-1-benzofuran-2-yl)(2,4-substituted phenyl)methanones (4a–4i) have been prepared by the Knoevenagel condensation of...     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

Atomic Layer Deposited Ti2O3 Thin Films

Ti₂O₃ thin films have been prepared through atomic layer deposition and subjected to electrical resistivity measurements as a function of temperature. The as-prepared films were stable for up to three weeks. In Ti₂O₃ thin films, the insulator-metal transition is observed at ∼80 K, with nearly 3–4 orders of magnitude change in resistivity. The anomalous increase in electrical resistivity in the films is in accordance with the two-band model. However, the energy interval between the bands depending on the crystallographic c/a ratio leads to a change in electrical resistivity as a function of temperature.