The effect of electron detachment on the structure and properties of the chlorine-acetonitrile anionic complex

The results of the theoretical study of ground state potential energy surfaces for the chlorine-acetonitrile anion and its photodetachment product are presented. The shallow potential surfaces allow for the nondefinitive position of the chlorine within the complex. The dissociation energy of the neutral complex, estimated through the thermodynamic cycle, indicates significant structural changes due to the photodetachment process. The excess negative charge is localized mostly on the chlorine atom, and the electron detachment proceeds as an electron is removed from chlorine. The process leads to drastic changes in the electrostatic interactions within the complex. The first electronic excited state corresponds to the excess electron transfer from chlorine to acetonitrile fragment. This state is a precursor of the observed charge-transfer-to-solvent state.     

Evaluation of a single-monochromator diode array spectroradiometer for sunbed UV-radiation measurements

The suitability of a new technology single-monochromator diode array spectroradiometer for UV-radiation safety measurements, in particular for sunbed measurements, was evaluated. The linearity, cosine response, temperature response, wavelength scale, stray-light and slit function of the spectroradiometer were determined and their effects on the measurement accuracy evaluated. The main error sources were stray-light and nonideal cosine response, for which correction methods are presented. Without correction, the stray-light may reduce the accuracy of the measurement excessively, particularly in the UV-B range. The expanded uncertainty of the corrected UV measurements is estimated to be 14%, which is confirmed with the comparative measurements carried out with a well-characterized double-monochromator spectroradiometer. The measurement accuracy is sufficient for sunbed measurements, provided that all corrections described above have been done and the user of the instrument has a good understanding of the instrument's operating principles and potential error sources. If these requirements are met, the tested spectroradiometer improves and facilitates market surveillance field measurements of sunbeds.     

Covalent chemistry and conformational dynamics of topologically chiral amide-based molecular knots

The readily available in gram quantities tris(allyloxy)knot of the amide-type 5 (knotane) can be completely and partially deprotected with nBu(3)SnH in the presence of a palladium catalyst resulting in hydroxyknotanes 7-9. These, in turn, react with diethylchlorophosphate giving rise to knotanes equipped with between one and three phosphoryl groups. Sulfonylation of bis(allyloxy)monohydroxyknotane 8 with p-toluenesulfonyl chloride and, following removal of one or two allyl groups from the intermediate monosulfonate 13, give rise to sulfonyloxy-allyloxy-hydroxy- and sulfonyloxy-dihydroxy-knotanes 15 and 14, respectively. This provides a convenient method for the preparation of knotanes with any substitution pattern. All new knotanes have been isolated in preparative amounts and as highly pure substances with an exception of allyloxy-dihydroxyknotane 9. This compound could only be obtained as a mixture with the corresponding monohydroxy-derivative 8. The structures of all synthesized compounds were established by means of FAB and MALDI TOF mass spectrometry, (1)H and (31)P NMR spectroscopy. The triphosphorylated knotane 10 exhibits high solubility in alcohols, allowing its complete enantiomeric resolution with a commercially available chiral HPLC column. (1)H,(1)H DQF-COSY correlation spectroscopy along with H/D exchange experiments and ab initio calculations provided the first detailed (1)H NMR signal assignments of knotanes in [D(6)]DMSO solution. The combination of variable temperature (1)H and (31)P NMR spectroscopy and molecular modeling has been applied to study the conformational behavior of the new knotanes in different solvents. It has been shown that in DMSO solution at room temperature knotanes exist in a relatively rigid nonsymmetrical conformation similar to that found in the solid state while faster conformational exchange leading to the average D(3) symmetrical structure was detected in a number of other solvents.     

Theoretical study on the structure and property relationship of the cationic conjugated polyelectrolytes

A theoretical study using density functional theory was performed to understand the structure/property relationship of the cationic conjugated polyelectrolytes, poly[9,9-bis-(6′-N,N,N-trimethylammonium) hexyl] fluorene-alt-4,7-(2,1,3-benzothiadiazole)] (PFBT-X, where X = Br). The torsion angle between the fluorene and benzothiadiazole units in the PFBT monomer was found to substantially affect the structural and electronic properties of the cationic PFBT monomer. The changes of geometrical parameter, HOMO and LUMO energy levels, and band gap, as well as the absorption maximum are discussed in terms of the torsion in the PFBT monomer structure. For comparison, its neutral analogue, the monomer of poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) was also studied. The length of conjugation backbone was also examined.     

Conformational analysis 29: Preparation and1H and13C NMR,FTIR, MS,and crystallographic conformational and configurational study of 3-Oxo-1,3-oxathiane and its monomethyl derivatives

3-Oxo-1,3-oxathiane (1) and its monomethyl derivatives were prepared by oxidation of the corresponding 1,3-oxathianes. The structural analysis was carried out by¹H and¹³C NMR, FTIR, and mass spectrometry. At 298 K compound1 was a 1 1 (at 173 K a 3 1) mixture of the SO(ax) and SO(eq) chair forms. The major oxidation products of methyl 1,3-oxathianes attained exclusively the SO(ax), Me(eq) chair forms except that of the 5-methyl derivative, which consisted of 7% of the SO(eq), Me(ax) chair conformation in CDCl₃ solution. The minor products of oxidation existed in anancomeric SO(eq), Me(eq) chair conformations. The oxidation of 2-methyl- 1,3-oxathiane, however, led to 3,3-dioxo derivative (6) in addition to thetrans [SO(eq)] monoxide. The crystal structures of6 andtrans-3-oxo-5-methyl-1,3-oxathiane were solved by X-ray diffractometry.     

Quantification of antimony depth profiles in Sb-doped tin dioxide thin films

Sb-doped SnO(2) thin films, deposited by atomic layer epitaxy (ALE) for gas sensor applications, have been characterized by secondary ion mass spectrometry (SIMS). Quantification of the depth profile data has been carried out by preparing a series of ion implanted standards. Average concentrations determined by SIMS have been compared with Sb/Sn ratios obtained by X-ray fluorescence (XRF) spectrometry and proton induced X-ray emission (PIXE) spectrometry and have been found to be in good agreement. However, a detection limit of 5x10(18) at cm(-3) could only be obtained because of mass interferences. SIMS data show that the ALE technique can be used to produce a controllable growth and doping of thin films.     

Non-Watson-Crick base pairing in RNA. quantum chemical analysis of the cis Watson-Crick/sugar edge base pair family

Large RNA molecules exhibit an astonishing variability of base-pairing patterns, while many of the RNA base-pairing families have no counterparts in DNA. The cis Watson-Crick/sugar edge (cis WC/SE) RNA base pairing is investigated by ab initio quantum chemical calculations. A detailed structural and energetic characterization of all 13 crystallographically detected members of this family is provided by means of B3LYP/6-31G and RIMP2/aug-cc-pVDZ calculations. Further, a prediction is made for the remaining 3 cis WC/SE base pairs which are yet to be seen in the experiments. The interaction energy calculations point at the key role of the 2'-OH group in stabilizing the sugar-base contact and predict all 16 cis WC/SE base-pairing patterns to be nearly isoenergetic. The perfect correlation of the main geometrical parameters in the gas-phase optimized and X-ray structures shows that the principle of isosteric substitutions in RNA is rooted from the intrinsic structural similarity of the isolated base pairs. The present quantum chemical calculations for the first time analyze base pairs involving the ribose 2'-OH group and unambiguously correlate the structural information known from experiments with the energetics of interactions. The calculations further show that the relative importance and absolute value of the dispersion energy in the cis WC/SE base pairs are enhanced compared to the standard base pairs. This may by an important factor contributing to the strength of such interactions when RNA folds in its polar environment. The calculations further demonstrate that the Cornell et al. force field commonly used in molecular modeling and simulations provides satisfactory performance for this type of RNA interactions.     

The influence of microhydration on the ionization energy thresholds of uracil and thymine

In the present study the ionization energy thresholds (IET's) of uracil and thymine have been calculated (with the B3LYP, PMP2, and P3 levels of theory using the standard 6-31++G(d,p) basis set) with one to three water molecules placed in the first hydration shell. Then (B3LYP) polarizable continuum model (PCM) calculations were performed with one to three waters of the hydration shell included. Calculations show there is a distinct effect of microhydration on uracil and thymine. For uracil, one added water results in a decrease in the IET of about 0.15 eV. The second and third water molecules cause a further decrease by about 0.07 eV each. For thymine, the first water molecule is seen to decrease the IET by about 0.1 eV, while the second and third water molecules cause a further decrease of less than 0.1 eV each. The changes in IET calculated here for thymine with one to three waters of hydration are smaller than the experimental values determined by Kim et al. (Kim, S. K.; Lee, W.; Herschbach, D. R. J. Phys. Chem. 1996, 100, 7933). Preliminary results presented here indicate that the experimental results may involve keto-enol tautomers of thymine. The results of placing the microhydrated structures of uracil and thymine in a PCM cavity was seen to make very little difference in the IET when compared to the IET of ordinary uracil or thymine in a PCM cavity. The implications are that accurate calculations of the IET's of uracil and thymine can be obtained by simply considering long-range solvation effects.     

Synthesis and coordinating ability of an anionic cobaltabisdicarbollide ligand geometrically analogous to BINAP

The anionic chelating ligand [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]- has been synthesized from [3,3'-Co(1,2-C2B9H11)2]- in very good yield in a one-pot process with an easy work-up procedure. The coordinating ability of this ligand has been studied with Group 11 metal ions (Ag, Au) and with transition-metal ions (Pd, Rh). The two dicarbollide halves of the [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]- ligand can swing about one axis in a manner analogous to the constituent parts of BINAP and ferrocenyl phosphine derivatives. All these ligands function as hinges, with the most important property in relation to the coordination requirements of the metal being the PP distance. [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]-, BINAP, ferrocenyl phosphine derivatives, and other hinge ligands present a range of different PP separations, and consequently different coordination spheres and dispositions around metal cations. To account for these differences, the equation Dphi2 = D02 + 4 R2cos2(90-phi/2) has been developed. It relates the PP distance (Dphi) in a complex with the minimum PP distance (D0) that is characteristic of the hinge-type ligand.     

Formation of bridging alkene and conjugated dialkenes exclusively generated from alkynes on the [3,3'-Co(1,2-C2B9H11)2]- platform. The unique hydroboration role of [3,3'-Co(1,2-C2B9H11)2]-

The unprecedented metal-mediated transformation of an alkyne into a B,B' bridging alkene is reported. Also, the unprecedented synthesis of a conjugated dialkene derivative of [3,3'-Co(1,2-C2B9H11)2]- generated only from an alkyne, contrary to the usual case where an alkyne and an alkene are needed, is described. This has been possible through the singular capacity of a B-H to produce hydroboration.