Absolute reaction rate of chlorine atoms with neopentane

The reaction of atomic chlorine with neopentane was studied in the gas phase with the Very Low Pressure Reactor (VLPR) technique over the temperature range 273–333 K. The absolute reaction rate was found to be temperature-independent, and the average rate constant was k₁ = (1.11± 0.13) × 10^?10 cm³ molecule^?1 s^?1 within experimental error. The reaction proceeds via metathesis of a hydrogen atom with no activation energy, and leads to the formation of HCl and neopentyl radical. © 1995 John Wiley & Sons, Inc.     

Kinetic potentiometric determination of citric acid with a perbromate-selective electrode

Citric acid is determined in the 96–960-μg range with relative errors of about 1% by means of its iron(II)-induced reaction with perbromate. Each analysis takes about 8 min. Tartaric and lactic acids interfere.     

Spontaneous Resolution by Crystallization of an Octanuclear Iron(III) Complex Using Only Racemic Reagents

The P and M enantiomers of the octanuclear [Fe₈(μ₄‐O)₄(μ‐4‐Cl‐pz)₁₂Cl₄] complex, having T symmetry, were resolved by temporary substitution of chloride ligands by racemic 4‐^sBu‐phenolates and subsequent crystallization, where the (S)‐ and (R)‐phenolates coordinate selectively to the M and P complexes, respectively. The complexes were characterized by circular dichroism analysis and X‐ray structure determination. This work constitutes a rare example of enantiomeric recognition resulting in spontaneous resolution upon crystallization.     

Salicylaldoxime in manganese(III) carboxylate chemistry: Synthesis, structural characterization and physical studies of hexanuclear and polymeric complexes

The use of salicylaldehyde oxime (H₂salox) in manganese(III) carboxylate chemistry has yielded new members of the family of hexanuclear compounds presenting the [Mn₆(μ₃-O)₂(μ₂-OR)₂]¹²⁺ core, complexes [Mn^III₆(μ₃-O)₂(O₂CPh)₂(salox)₆(L₁)₂(L₂)₂] (L₁ = py, L₂ = H₂O (1); L₁ = Me₂CO, L₂ = H₂O (2); L₁ = L₂ = MeOH (3)). Addition of NaOMe to the acetonitrile reaction mixture, afforded the 1D complex [Mn^III₃Na(μ₃-O)(O₂CPh)₂(salox)₃(MeCN)]_n (4), whereas addition of NaClO₄ to the acetone reaction mixture afforded an analogous 1D complex [Mn^III₃Na(μ₃-O)(O₂CPh)₂(salox)₃(Me₂CO)]_n (5). The structures of 1–3 present the [Mn₆(μ₃-O)₂(μ₂-OR)₂]¹²⁺ core and can be described as two [Mn₃(μ₃-O)]⁷⁺ triangular subunits linked by two μ₂-oximato oxygen atoms of the salox²⁻ ligands, which show the less common μ₃-κ²O:κO′:κN coordination mode. The benzoato ligands are coordinated through the usual syn,syn-μ₂-κO:κO′ mode. The 1D polymeric structures of 4 and 5 consist of alternating [Mn₃(μ₃-O)]⁷⁺ subunits and Na⁺ atoms linked through two μ₃-κ²O:κO′:κN and one μ₄-κ²O:κ²O′:κN salox²⁻ ligands as well as one syn,anti-μ₂-κO:κO′ benzoato ligand. DC and AC magnetic susceptibility studies on 1 revealed the stabilization of an S = 4 ground state, and indications of single-molecule magnetism behavior, whereas the DC experimental data from polycrystalline sample of 5 are indicative of antiferromagnetic interactions within the [Mn₃] subunit. Solid state ¹H NMR data of 1 were used to probe the spin-lattice relaxation of the system.     

Development of intermolecular potential models for electrolyte solutions using an electrolyte SAFT-VR Mie equation of state

ABSTRACT

We present a theoretical framework and parameterisation of intermolecular potentials for aqueous electrolyte solutions using the statistical associating fluid theory based on the Mie interaction potential (SAFT-VR Mie), coupled with the primitive, non-restricted mean-spherical approximation (MSA) for electrolytes. In common with other SAFT approaches, water is modelled as a spherical molecule with four off-centre association sites to represent the hydrogen-bonding interactions; the repulsive and dispersive interactions between the molecular cores are represented with a potential of the Mie (generalised Lennard-Jones) form. The ionic species are modelled as fully dissociated, and each ion is treated as spherical: Coulombic ion–ion interactions are included at the centre of a Mie core; the ion–water interactions are also modelled with a Mie potential without an explicit treatment of ion–dipole interaction. A Born contribution to the Helmholtz free energy of the system is included to account for the process of charging the ions in the aqueous dielectric medium. The parameterisation of the ion potential models is simplified by representing the ion–ion dispersive interaction energies with a modified version of the London theory for the unlike attractions. By combining the Shannon estimates of the size of the ionic species with the Born cavity size reported by Rashin and Honig, the parameterisation of the model is reduced to the determination of a single ion–solvent attractive interaction parameter. The resulting SAFT-VRE Mie parameter sets allow one to accurately reproduce the densities, vapour pressures, and osmotic coefficients for a broad variety of aqueous electrolyte solutions; the activity coefficients of the ions, which are not used in the parameterisation of the models, are also found to be in good agreement with the experimental data. The models are shown to be reliable beyond the molality range considered during parameter estimation. The inclusion of the Born free-energy contribution, together with appropriate estimates for the size of the ionic cavity, allows for accurate predictions of the Gibbs free energy of solvation of the ionic species considered. The solubility limits are also predicted for a number of salts; in cases where reliable reference data are available the predictions are in good agreement with experiment.     

Complexes derived from the general copper(II)/maleamic acid/N,N′,N′′-chelate reaction systems: Synthetic,reactivity, structural and spectroscopic studies

The synthetic investigation of the Cu^II/maleamate(−1) ion (HL⁻)/N,N′,N′′-chelate general reaction system has allowed access to compounds [Cu₂(HL)₂(bppy)₂](ClO₄)₂·H₂O (1·H₂O), [Cu(HL)(bppy)(ClO₄)] (2) and [Cu(HL)(terpy)(H₂O)](ClO₄) (4) (bppy = 2,6-bis(pyrazol-1-yl)pyridine, terpy = 2,2′;6′,2′′-terpyridine). In the absence of externally added hydroxides, compound [Cu₂(L′)₂(bppy)₂](ClO₄)₂ (3) was obtained from MeOH solutions; L′⁻ is the monomethyl maleate(−1) ligand which is formed in situ via the Cu^II-assisted HL⁻ → L′⁻ transformation. In the case of tptz-containing (tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine) reaction systems, the Cu^II-assisted hydrolysis of tptz to pyridine-2-carboxamide (L1) afforded complex [Cu(L1)₂(NO₃)₂] (5). The crystal structures of 1–5 are stabilized by intermolecular hydrogen bonding and π–π stacking interactions. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the ligands.     

Synthetic,structural and spectroscopic studies of copper(II) complexes derived from the combination of the succinamate(−1) ligand with aromatic N,N′-chelates

The use of succinamic acid (H₂sucm)/N,N′-chelate (2,2′-bipyridine, bpy; 4,4′-dimethyl-2,2′-bipyridine, dmbpy; 1,10-phenanthroline, phen) ‘ligand blends’ in CuX₂·yH₂O (X = NO₃, y = 3; X = Cl, y = 0) chemistry has yielded the new complexes [Cu₂(Hsucm)₃(bpy)₂](NO₃)·0.5MeOH (1·0.5MeOH), [Cu₂(Hsucm)(OH)Cl(bpy)₂](OH)·3.6H₂O (5·3.6H₂O) and [Cu₂(Hsucm)₂Cl₂(phen)₂] (6). The succinamate(−1) ion behaves as a carboxylate ligand and exists in two different coordination modes in the structures of the above complexes, i.e., the common syn, syn μ₂-κO:κO′ in 1, 5 and 6, and the μ₂-κ²O:κO′ in 1. The primary amide group of Hsucm⁻ remains uncoordinated and participates in intermolecular hydrogen bonding interactions leading to 1D, 2D and 3D networks. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the Hsucm⁻ ligands.     

Keto forms of salicylaldehyde Schiff bases: structural and theoretical aspects

Twelve Schiff bases of methoxy-substituted salicylaldehyde have been examined by crystallographic and spectroscopic methods, as well as by DFT theoretical calculations in order to investigate the effect of the substituent's position on the keto-enol equilibrium in the crystalline state. Four out of the 10 structurally characterized compounds with methoxy substitution on the para and/or ortho positions with respect to the aldimine bridge and deriving from aliphatic amines or alkylarylamines are found as cis-keto tautomers and form dimers. In contrast, the five pure enol tautomers derive either from aliphatic or alkylarylamines and are meta substituted or from aniline or benzylamine and are para and/or ortho methoxy substituted. The DFT calculations support the crystallographic results and, moreover, they have shown that keto and enol tautomers are affected differently by the relative arrangement of the monomers. Overall, the DFT calculations point to a plausible hypothesis for the stabilization of the keto form in the crystalline state: In cases with a sufficiently low enol-keto energy difference of the isolated monomers, as when the methoxy group is at ortho and/or para positions with respect to the aldimino group, extra stabilization of the keto form is derived from molecular association, thus leading to its crystallization.