Characterization of oligosaccharide moieties of intact glycoproteins by microwave-assisted partial acid hydrolysis and mass spectrometry

A method, which utilizes microwave-assisted partial acid hydrolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), to elucidate oligosaccharide composition of intact glycoproteins is presented here. Glycoproteins, such as ribonuclease B, avidin, alpha1-acid glycoprotein, and fetuin, are used as model systems to demonstrate this technique. Partial cleavage of oligosaccharides from whole intact glycoproteins with trifluoroacetic acid was observed after a short exposure to microwaves. Due to the high-resolution mass spectra obtained by MALDI-TOFMS from glycoproteins with molecular weights less than 20 kDa, the compositions of oligosaccharides are readily derived for ribonuclease B and avidin. The data agree with the proposed oligosaccharide structures of ribonuclease B (five glycoforms) and avidin (eight glycoforms). Larger glycoproteins such as alpha1-acid glycoprotein (many glycoforms) and fetuin (many glycoforms) exhibited only broad peaks with no glycoform resolution. Nevertheless, this method can be used successfully for analysis of glycoproteins with molecular weights greater than 20 kDa to determine the presence or absence of glycosylation.     

Electroorganic synthesis of benzathine

Benzathine is prepared in good yields from cyanobenzene by a combination of electrochemical hydrogenation and Kolbe electrolysis using nickel and platinum electrodes in the presence of methanolic sodium methoxide in an undivided cell.     

Isotope‐Coded Affinity Tagging Technique Using Avidin Functional Affinity Electrophoresis: An Alternative to an Avidin Affinity Column

Avidin functional affinity electrophoresis (AFAEP) is substituted for an avidin affinity column (AAC) to capture biotinylated peptides in the Isotope‐Coded Affinity Tagging (ICAT) technique which is a valuable tool in quantitative proteomics. In this new technique, the AFAEP‐captured ICAT‐labeled biotinylated peptides are extracted with the biotin tag intact from the polyacrylamide gel piece with aqueous 95% formamide (pH 8.2) at 65 °C for 20 min, and then detected by a matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometer. Bovine serum albumin (BSA) and the ¹²C‐ and ¹³C‐ICAT reagents are used to test this AFAEP‐ICAT technique. The results show that both AFAEP and AAC methods provide quantitative information of the relative amounts of ¹²C‐ and ¹³C‐ICAT‐labeled biotinylated tryptic peptides of BSA in a sample. Compared with AAC, the AFAEP is cheaper to perform, more stringent in capturing the biotinylated peptides, and capable of simultaneously processing multiple samples.     

Novel Synthesis of Mafenide and Other Amino Sulfonamides by Electrochemical Reduction of Cyano Sulfonamides

Both aliphatic and aromatic amino sulfonamides such as mafenide ( 1a ) were synthesized in good yields (80–86%) by direct electrochemical hydrogenation of the corresponding nitriles in an undivided cell containing a Ni cathode, a Pt anode, and Raney Ni as catalyst (Table 1). The reaction can be performed without external supply of pressurized gas by in situ generation of H₂. Slightly elevated temperatures (45°) and low current densities (10 mA/cm²) are favorable conditions for this type of electrochemical nitrile hydrogenation. Our synthetic protocol does not require high‐pressure equipment or chemical hazards, is environmentally very friendly, and more economical than traditional methods. The concentration of adsorbed H^. radicals on the catalyst surface can be easily controlled by adjusting the electric potential, which may lead to improved product selectivity and, at the same time, reduces the risk of explosion and fire.     

Optimization and Validation of RP-LC/UV–VIS Detection Method for Simultaneous Determination of Fat-Soluble Anti-Oxidant Vitamins, all-trans-Retinol and α-Tocopherol in Human Serum: Effect of Experimental Parameters

A versatile isocratic reversed-phase liquid chromatographic/ultraviolet–visible detection method for simultaneous determination of all-trans-retinol and α-tocopherol in human serum was developed and validated after optimization of various chromatographic conditions and other experimental parameters. Analytes were separated on a Kromasil 100 RP₁₈ (150 × 4.6 mm, 5 μm) analytical column protected by a Perkin Elmer RP₁₈ (30 × 4.6 mm, 10 μm) guard cartridge. The mobile phase, methanol–water (96:04 v/v) was pumped at a flow rate of 2.2 mL min^?1 and the column eluents were monitored at the wavelength of 292 nm using retinyl acetate (1.0 μg mL^?1) as the internal standard for both analytes. Sample preparation was based on protein precipitation and stabilization with 2,6-bis(1,1-dimethylethyl)-4-methylphenol/ethanol and a two step extraction process using n-hexane followed by dichloromethane as extraction solvents. Sample size was kept 20 μL and separation of analytes was achieved in less than 7 min. The present method demonstrated acceptable values for specificity/selectivity, linearity within the expected concentration range, recovery, precision, sensitivity, stability of solutions, robustness, and system suitability specifications and tests. The method was used for monitoring all-trans-retinol and α-tocopherol concentrations in human serum samples and could also be applied to other sample matrices such as brain slices and cosmetic products if attention is paid to the extraction procedure.     

Enhanced Electron Transfer Rates by AC Voltammetry for Ferrocenes Attached to the End of Embedded Carbon Nanofiber Nanoelectrode Arrays

The effect of the interior structure of carbon nanomaterials on their electrochemical properties is not well understood. We report here the electron transfer rate (ETR) of ferrocene (Fc) molecules covalently attached to the exposed end of carbon nanofibers (CNFs) in an embedded nanoelectrode array. The ETR in normal DC voltammetry was found to be limited by the conical graphitic stacking structure interior of CNFs. AC voltammetry, however, can cope with this intrinsic materials property and provide over 100 times higher ETR, likely by a new capacitive pathway. This provides a new method for high‐performance electroanalysis using CNF nanoelectrodes.     

Synthesis of nano-sized zeolite-Y functionalized with 5-amino-3-thiomethyl 1H-pyrazole-4-carbonitrile for effective Fe(III)-chelating strategy

Zeolite crystals having faujasite-type (FAU) topology in the nanometer range were first synthesized from amorphous rice husk ash at a low temperature of 363 K under autogenous pressure. Following this, surface functionalization of the produced zeolite with 5-amino-3-thiomethyl 1H-pyrazole-4-carbonitrile (pyrazole; Py) was carried out by two different methods, namely liquefied-period adsorption of Py (Py/Y_im) and a flexible ligand method (Py/Y_ss). The latter provides a larger amount of Py formed into as-made zeolite-Y. The sorption of Fe(III) onto Py/NaY afforded large meso–macroporosity introduced by the aggregation–assembly between Fe(III)Py complexes and NaY zeolite, which was typically evidenced for Fe(III)Py/Y_ss. The materials were characterized by XRD, FT-IR spectroscopy, thermal analysis (TGA) and porous structure by N₂ adsorption–desorption at 77 K. The XRD evaluation showed that the zeolite structure was managed right after adding Fe(III) to Py/Y, although a change in intensity of the zeolite reflections on complex formation was noticed. The FT-IR spectrum of Fe(III)Py/Y_ss exhibited two bands at 3594 and 3542 cm^?1 assigned to bridging hydroxyl groups associated with a Brönsted site, which did not exist in the spectra of Fe(III)Py/Y_im and Fe(III)-exchanged as-made NaY zeolite. This effect was ascribed to the induced greater electronegativity of the ligand towards Fe(III) species in dissociation of water molecules, producing acidic protons that are potential Brönsted acid sites. It was also evident that the Fe(III) adsorption capacity on Py/Y_ss is greater than on as-made NaY zeolite and Py/Y_im, owing most likely to the increasing concentration of the incorporating Py ligand which leads to an increase in the number of binding sites. The Fe(III) adsorption onto Py/Y_ss was well described by the pseudo-second-order kinetic model. Density functional theory (B3LYP/6-311G*) was performed to understanding the interaction mode of the ligand and complex with zeolite. The QSPR was calculated depending on the optimization geometries, frontier molecular orbitals, thermodynamic parameters, and global chemical reactivates, which were discussed for the studied compounds. The HOMOs, LUMOs and molecular electrostatic potentials were plotted to elucidate the interaction manner of the tested compounds with the zeolite. The nonlinear optical properties were elucidated via 1st and 2nd hyper-polarizabilities. The auto-degradation behavior was predicted for the complex, based on the ionization optional and bond dissociation enthalpy. The interactions between P_y and Fe(III)P_y with the zeolite surface have been described with molecular dynamics using a Monte Carlo simulation.     

Dioclins A and B,new antioxidant flavonoids from Dioclea reflexa

Dioclins A (1) and B (2), the new flavonoids, have been isolated from the ethyl acetate soluble fraction of the roots of Dioclea reflexa along with 3,5-dihydroxy-4 methoxybenzoic acid (3), lupeol (4) and the rare dipeptide, auratiamide acetate (5). Their structures have been elucidated by spectroscopic techniques. The compounds 1 and 2 showed a significant antioxidant activity in DPPH radical scavenging assay.     

新开花粉蛋白的盐酸胍去折叠过程

本文利用荧光光谱和园二色光谱了新开花粉蛋白的盐酸胍去折叠过程。结果显示：新开花粉蛋白的盐酸胍去折叠是一个只包含天然蛋白和变性终态的二态过程,与已经报道的天花粉蛋白的盐酸胍去折叠的过程不同。