Mechanism of white phosphorus activation by three-coordinate molybdenum(III) complexes: a thermochemical, kinetic, and quantum chemical investigation

White phosphorus (P(4)) reacts with three-coordinate molybdenum(III) trisamides or molybdaziridine hydride complexes to produce either bridging or terminal phosphide (P(3)(-)) species, depending upon the ancillary ligand steric demands. Thermochemical measurements have been made that place the MoP triple bond dissociation enthalpy at 92.2 kcal.mol(-)(1). Thermochemical measurements together with computational analysis rule out simple P-atom abstraction from P(4) as a step in the phosphorus activation mechanism. Kinetic measurements made by the stopped-flow method show that the reaction between the monomeric molybdenum complexes and P(4) is first-order both in metal complex and in P(4). Cyclo-P(3) complexes can be obtained when ancillary ligand steric demands are small, but kinetic measurements rule them out as monometallic intermediates in the P(4) activation mechanism. Also studied by calorimetric, kinetic, and in one case variable-temperature NMR methods is the process of mu-phosphide bridge formation. Post-rate-determining steps of the P(4) activation process were examined in a search for minima on the reaction's potential energy surface, leading to the proposal of two plausible, parallel, bimetallic reaction channels.     

Molybdenum chalcogenobenzimidato complexes: radical synthesis and nitrile extrusion via beta-EPh (E = S, Se, and Te) elimination

Molybdenum chalcogenobenzimidates of formula (Ph[PhE]C=N)Mo(N[t-Bu]Ar)(3) (Ar = 3,5-C(6)H(3)Me(2)) have been obtained by treatment of Mo(N[t-Bu]Ar)(3) sequentially with benzonitrile and 0.5 equiv of PhEEPh (E = S, Se, and Te). Molecular structure determinations have been carried out for the S and Se variants. The Te variant extrudes PhCN forming structurally characterized (PhTe)Mo(N[t-Bu]Ar)(3) with facility assessed via stopped-flow kinetic measurements, while the Se and S analogues exhibit increasing stability. Quantum chemical calculations and solution calorimetry have been employed as an aid to interpretation of the PhCN extrusion reaction.     

Comparison of thermodynamic and kinetic aspects of oxidative addition of PhE-EPh (E = S, Se, Te) to Mo(CO)3(PR3)2, W(CO)3(PR3)2, and Mo(N[tBu]Ar)3 complexes. The role of oxidation state and ancillary ligands in metal complex induced chalcogenyl radical generation

Enthalpies of oxidative addition of PhE-EPh (E = S, Se, Te) to the M(0) complexes M(PiPr3)2(CO)3 (M = Mo, W) to form stable complexes M(*EPh)(PiPr3)2(CO)3 are reported and compared to analogous data for addition to the Mo(III) complexes Mo(N[tBu]Ar)3 (Ar = 3,5-C6H3Me2) to form diamagnetic Mo(IV) phenyl chalcogenide complexes Mo(N[tBu]Ar)3(EPh). Reactions are increasingly exothermic based on metal complex, Mo(PiPr3)2(CO)3 < W(PiPr3)2(CO)3 < Mo(N[tBu]Ar)3, and in terms of chalcogenide, PhTe-TePh < PhSe-SePh < PhS-SPh. These data are used to calculate LnM-EPh bond strengths, which are used to estimate the energetics of production of a free *EPh radical when a dichalcogenide interacts with a specific metal complex. To test these data, reactions of Mo(N[tBu]Ar)3 and Mo(PiPr3)2(CO)3 with PhSe-SePh were studied by stopped-flow kinetics. First- and second-order dependence on metal ion concentration was determined for these two complexes, respectively, in keeping with predictions based on thermochemical data. ESR data are reported for the full set of bound chalcogenyl radical complexes (PhE*)M(PiPr3)2(CO)3; g values increase on going from S to Se, to Te, and from Mo to W. Calculations of electron densities of the SOMO show increasing electron density on the chalcogen atom on going from S to Se to Te. The crystal structure of W(*TePh)(PiPr3)2(CO)3 is reported.     

Benzonitrile extrusion from molybdenum(IV) ketimide complexes obtained via radical C-E (E = O, S, Se) bond formation: toward a new nitrogen atom transfer reaction

Beta-elimination is explored as a possible means of nitrogen-atom transfer into organic molecules. Molybdenum(IV) ketimide complexes of formula (Ar[t-Bu]N)3Mo(N=C(X)Ph), where Ar = 3,5-Me2C6H3 and X = SC6F5, SeC6F5, or O2CPh, are formally derived from addition of the carbene fragment [:C(X)Ph] to the terminal nitrido molybdenum(VI) complex (Ar[t-Bu]N)3Mo identical with N in which the nitrido nitrogen atom is installed by scission of molecular nitrogen. Herein the pivotal (Ar[t-Bu]N)3Mo(N=C(X)Ph) complexes are obtained through independent synthesis, and their propensity to undergo beta-X elimination, i.e., conversion to (Ar[t-Bu]N)3MoX + PhC identical with N, is investigated. Radical C-X bond formation reactions ensue when benzonitrile is complexed to the three-coordinate molybdenum(III) complex (Ar[t-Bu]N)3Mo and then treated with 0.5 equiv of X2, leading to facile assembly of the key (Ar[t-Bu]N)3Mo(N=C(X)Ph) molecules. Treated herein are synthetic, structural, thermochemical, and kinetic aspects of (i) the radical C-X bond formation and (ii) the ensuing beta-X elimination processes. Beta-X elimination is found to be especially facile for X = O2CPh, and the reaction represents an attractive component of an overall synthetic cycle for incorporation of dinitrogen-derived nitrogen atoms into organic nitrile (R-C identical with N) molecules.     

Solution calorimetric and stopped-flow kinetic studies of the reaction of *Cr(CO)3C5Me5 with PhSe-SePh and PhTe-TePh. Experimental and theoretical estimates of the Se-Se, Te-Te, H-Se, and H-Te bond strengths

The kinetics of the oxidative addition of PhSeSePh and PhTeTePh to the stable 17-electron complex *Cr(CO)3C5Me5 have been studied utilizing stopped-flow techniques. The rates of reaction are first-order in each reactant, and the enthalpy of activation decreases in going from Se (deltaH(double dagger) = 7.0 +/- 0.5 kcal/mol, deltaS(double dagger) = -22 +/- 3 eu) to Te (deltaH(double dagger) = 4.0 +/- 0.5 kcal/mol, deltaS(double dagger) = -26 +/- 3 eu). The kinetics of the oxidative addition of PhSeH and *Cr(CO)3C5Me5 show a change in mechanism in going from low (overall third-order) to high (overall second-order) temperatures. The enthalpies of the oxidative addition of PhE-EPh to *Cr(CO)3C5Me5 in toluene solution have been measured and found to be -29.6, -30.8, and -28.9 kcal/mol for S, Se, and Te, respectively. These data are combined with enthalpies of activation from kinetic studies to yield estimates for the solution-phase PhE-EPh bond strengths of 46, 41, and 33 kcal/mol for E = S, Se, and Te, respectively. The corresponding Cr-EPh bond strengths are 38, 36, and 31 kcal/mol. Two methods have been used to determine the enthalpy of hydrogenation of PhSeSePh in toluene on the basis of reactions of HSPh and HSePh with either *Cr(CO)3C5Me5 or 2-pyridine thione. These data lead to a thermochemical estimate of 72 kcal/mol for the PhSe-H bond strength in toluene solution, which is in good agreement with kinetic studies of H atom transfer from HSePh at higher temperatures. The reaction of H-Cr(CO)3C5Me5 with PhSe-SePh is accelerated by the addition of a Cr radical and occurs via a rapid radical chain reaction. In contrast, the reaction of PhTe-TePh and H-Cr(CO)3C5Me5 does not occur at any appreciable rate at room temperature, even in the presence of added Cr radicals. This is in keeping with a low PhTe-H bond strength blocking the chain and implies that H-TePh < or = 63 kcal/mol. Structural data are reported for PhSe-Cr(CO)3C5Me5 and PhS-Cr(CO)3C5Me5. The two isostructural complexes do not show signs of an increase in steric strain in terms of metal-ligand bonds or angles as the Cr-EPh bond is shortened in going from Se to S. Bond strength estimates of the PhE-H and PhE-EPh derived from density functional theory calculations are in reasonable agreement with experimental data for E = Se but not for E = Te. The nature of the singly occupied molecular orbital of the *EPh radicals is calculated to show increasing localization on the chalcogenide atom in going from S to Se to Te.     

Nickel(II) complexes with tetra- and pentadentate aminopyridine ligands: synthesis, structure, electrochemistry, and reduction to nickel(I) species

A series of nickel(II) complexes with polydentate aminopyridine ligands N,N,N'-tris-[2-(2'-pyridyl)ethyl]ethane-1,2-diamine (L1), N,N,N'-tris-[2-(2'-pyridyl)ethyl]-N'-methylethane-1,2-diamine (L2), and N,N'-bis-[2-(2'-pyridyl)ethyl]-N,N'-dimethylethane-1,2-diamine (L3) were synthesized and characterized by elemental analysis and spectroscopic methods. Single-crystal X-ray diffraction studies showed that the Ni(II) ions have five-coordinate square-pyramidal geometry in [NiL2](ClO(4))(2), similar to that previously found in [NiL1](ClO(4))(2) x CH(3)NO(2) (Hoskins, B. F.; Whillans, F. D.J. Chem. Soc., Dalton Trans. 1975, 657), and square-planar geometry in [NiL3](ClO(4))(2). All three nickel(II) complexes are reduced by sodium borohydride or sodium amalgam in organic solvents to nickel(I) species, which were identified by highly anisotropic EPR spectra at 100 K: g(1) = 2.239, g(2) = 2.199, and g(3) = 2.025 for [NiL1](+); g(axially) = 2.324 and g(radially) = 2.079 for [NiL2](+) and [NiL3](+). Cyclic voltammetry of the nickel(II) complexes in acetonitrile exhibited reversible reduction waves at -1.01 V for [NiL1](2+), -0.91 V for [NiL2](2+), and -0.83 V for [NiL3](2+) versus SCE, potentials which are significantly less negative than those of most previously characterized Ni(II) complexes with nitrogen-only donor atoms. Complexes [NiL1](2+) and [NiL2](2+) showed high catalytic activity in the electroreduction of 1,2-trans-dibromocyclohexane to cyclohexene.     

Synthesis of oligonucleotides with a 2'-cap at the 3'-terminus via reversed phosphoramidites

[reaction: see text] A method is presented for the synthesis of single compounds or small combinatorial libraries of oligonucleotides with 2'-acylamido-2'-deoxyuridine residues at the 3'-terminus. Selection experiments identified the residue of anthraquinone-2-carboxylic acid as a "molecular cap" that increases the UV melting point of the duplex (5'-ACGCGU-3')(2) by up to 28 degrees C compared to the unmodified control duplex.     

Complexes of benzo-15-crown-5 with protonated primary amines and diamines

Three complexes of benzo-15-crown-5 (B15C5) with protonated primary amines [PhCH₂NH₃(B15C5)](ClO₄), [p-C₆H₄(CH₂NH₃)₂(B15C5)₂](ClO₄)₂, and [(CH₂)₄(NH₃)₂(B15C5)₂](SCN)₂ were isolated and studied in acetonitrile solutions by NMR, and in the solid state by X-ray crystallography. In all complexes, one B15C5 molecule was bound with each R-NH₃⁺ moiety with characteristic small separation of 1.84-1.86 Å between the nitrogen of the R-NH₃⁺ group and the O₅ mean plane of the crown residue. No sandwich-type complexes with a 1:2 R-NH₃⁺/B15C5 stoichiometry were observed. Binding affinities of B15C5 in acetonitrile were similar for all ammonium cations studied: K₁=550±10 M⁻¹ for [PhCH₂NH₃]⁺; K₁=1100±100 and K₂=400±30 M⁻¹ for [p-C₆H₄(CH₂NH₃)₂]²⁺; and K₁=1100±100 and K₂=300±30 M⁻¹ for [H₃N(CH₂)₄NH₃]²⁺. The complexation is primarily enthalpy-driven (ΔH°=−4.9±0.5 kcal/mol, ΔS°=−3.8±1.0 eu for PhCH₂NH₃⁺-B15C5), as determined by variable temperature ¹H NMR titrations.     

Stable supramolecular dimer of self-complementary benzo-18-crown-6 with a pendant protonated amino arm

The novel 4'-(ammoniummethylene)benzo-18-crown-6 cation was synthesized as a hexafluorophosphate salt and found to exist as a cyclophane-like dimer in the solid state, gas phase and in acetonitrile solution.     

铁镍钴矩磁合金的铁心损耗

本文研究了经过纵向磁退火的铁镍钴合金带的铁心损耗,发现P/f-f曲线具有明显的反常行为。用180°畴壁移的反常涡流损耗理论模型做了解释。并提出一些减小损耗的可能途径。