Development of a radiotracer method for measuring CO2 uptake by cement - wood mixtures

Radiotracer method was developed for measuring¹⁴CO₂ content in cement-wood mixtures. The carbon dioxide used for the treatment was labeled with¹⁴C, a -emitting radioisotope, and samples were measured by -scintillation and liquid scintillation techniques. Test samples were prepared in the laboratory with various compositions and treated with labeled¹⁴CO₂. The tracer was released from Ba¹⁴CO₃ by lactic acid with total activity of 37 MBq. Selectivity of the technique allows to distinguish the carbon dioxide bound during the treatment and bound previously from the mbient air. Sensitivity of the method is higher than that of traditional methods and allowed determination of CO₂ content in each component of the mixture. It is 63 ng. if measured by -scintillation detector and 1.6 ng, if measured by liquid scintillation. Accuracy of the method is 0.3%.     

Modifying LnHPDO3A Chelates for Improved T1 and CEST MRI Applications

The new ligand HPDO3MA [(R,R,R,R)-10-(2-hydroxypropyl)-α,α′,α′′-trimethyl-1,4,7,10-tetraazacyclododecane-1,4,7-triacetic acid] was designed to combine and optimize the chemical properties of the macrocyclic ligands HPDO3A and DOTMA. The presence of the methyl groups on the acetic pendant arms of HPDO3A is expected to rigidify the structure of the ligand and favor an increase of the kinetic inertness of the Ln complexes. ¹H NMR spectra of Eu(HPDO3MA) displayed the presence of two pairs of diastereoisomers: SAP (square antiprismatic) and TSAP (twisted square antiprismatic) isomers (56 and 44 %, respectively). In addition, ¹H and ¹⁷O relaxometric NMR studies of Gd(HPDO3MA) showed approximately a 10 % increase in relaxivity and a faster water exchange rate with respect to Gd(HPDO3A). Moreover, a detailed chemical exchange saturation transfer (CEST) characterization of Yb(HPDO3MA) displayed a sensitivity about two times larger than that of Yb(HPDO3A) both in phantom and in cell labeling experiments. Finally, the kinetic inertness of Yb(HPDO3MA) was measured to be twice as high as that of Yb(HPDO3A), with a dissociation half-life at physiological pH of about 2500 years.     

Synthesis and enantiomeric recognition studies of a novel 5,5-dioxophenothiazine-1,9 bis(thiourea) containing glucopyranosyl groups

A novel optically active 5,5-dioxophenothiazine-1,9 bis(thiourea) containing glucopyranosyl groups was synthesized and its enantiomeric recognition properties were examined towards the enantiomers of tetrabutylammonium salts of chiral α-hydroxy and N-protected α-amino acids using UV–vis spectroscopy.     

Aryl‐Phosphonate Lanthanide Complexes and Their Fluorinated Derivatives: Investigation of Their Unusual Relaxometric Behavior and Potential Application as Dual Frequency 1H/19F MRI Probes

A series of low molecular weight lanthanide complexes were developed that have high ¹H longitudinal relaxivities (r₁) and the potential to be used as dual frequency ¹H and ¹⁹F MR probes. Their behavior was investigated in more detail through relaxometry, pH‐potentiometry, luminescence, and multinuclear NMR spectroscopy. Fitting of the ¹H NMRD and ¹⁷O NMR profiles demonstrated a very short water residence lifetime (<10 ns) and an appreciable second sphere effect. At lower field strengths (20 MHz), two of the complexes displayed a peak in r₁ (21.7 and 16.3 mM ^?1 s^?1) caused by an agglomeration, that can be disrupted through the addition of phosphate anions. NMR spectroscopy revealed that at least two species are present in solution interconverting through an intramolecular binding process. Two complexes provided a suitable signal in ¹⁹F NMR spectroscopy and through the selection of optimized imaging parameters, phantom images were obtained in a MRI scanner at concentrations as low as 1 mM . The developed probes could be visualized through both ¹H and ¹⁹F MRI, showing their capability to function as dual frequency MRI contrast agents.     

The effect of palladium dispersion and promoters on lactose oxidation kinetics

Lactose oxidation was investigated at 70 °C and at pH 8 using oxygen as an oxidant over a comprehensive set of commercially available mono- and multi-metallic as well as promoted Pd catalysts with active carbon, alumina and calcium carbonate as catalyst supports. An optimum cluster size of 6–10 nm resulted in the highest initial turnover frequencies. High conversion levels above 90% were achieved on Pd/C catalyst, as well as over Pd/Al₂O₃ and (Pd–Pb)/CaCO₃, whereas (Pd–V)/C catalyst gave only 30% conversion after 200 min. The latter catalyst was relatively inactive due to its high support acidity and profound deactivation during oxidation. Besides the main oxidation product, lactobionic acid, also, lactulose was generated as a result of lactose isomerisation under alkaline conditions. The electrochemical potentials of the catalysts were measured during lactose oxidation. The main result of these measurements was that, when the electrochemical potential of the catalyst increased very quickly, its oxidation activity was low due to metal over-oxidation. The selectivities to the desired product, lactobionic acid, were relatively high, above 80% for most of the catalysts, except for (Pd–V)/C. Furthermore, the selectivity to the lactobionic acid decreased with increasing metal dispersion, thus, indicating that the optimum metal particle sizes for producing high amounts of lactobionic acid is above 3 nm.     

Two-dimensional liquid chromatography/mass spectrometry/mass spectrometry separation of water-soluble metabolites

Off-line two-dimensional liquid chromatography with tandem mass spectrometry detection (2D-LC/MS-MS) was used to separate a set of metabolomic species. Water-soluble metabolites were extracted from Escherichia coli and Saccharomyces cerevisae cultures and were immediately analyzed using strong cation exchange (SCX)-hydrophilic interaction chromatography (HILIC). Metabolite mixtures are well-suited for multidimensional chromatography as the range of components varies widely with respect to polarity and chemical makeup. Some currently used methods employ two different separations for the detection of positively and negatively ionized metabolites by mass spectrometry. Here we developed a single set of chromatographic conditions for both ionization modes and were able to detect a total of 141 extracted metabolite species, with an overall peak capacity of ca. 2500. We show that a single two-dimensional separation method is sufficient and practical when a pair or more of unidimensional separations are used in metabolomics.     

Surface-enhanced Raman scattering and DFT investigation of Eriochrome Black T metal chelating compound

The surface-enhanced Raman scattering (SERS) spectra of Eriochrome Black T (EBT) and its Cu(II), Fe(III), Mn(II) and Pb(II) complexes were recorded using a hydroxylamine reduced silver colloid. Molecular geometry optimization, molecular electrostatic potential (MEP) distribution and vibrational frequencies calculation were performed at B3LYP/6-31G(d) level of theory for the EBT molecule and its Cu(EBT), Fe(EBT) and Mn(EBT) metal complexes. Differentiation between EBT complexes of Cu(II), Fe(III), Mn(II) and Pb(II) is shown by the SERS spectral features of each complex.     

Primary coolant circuit characterization related to starting up the WWER-440 unit

Neutron activation analysis, gamma-ray spectrometry, particle sizing and photography of the corrosion products were used to qualify the constructional materials and primary coolants. The investigations related to: characterization of the construction materials of the primary circuit, circulated washing, hot conditioning, physical and energetic start up. The aim of the measurements was to study the cleanness of the primary circuit from assembling up to energetic start up and to follow closely the variation in the amount and the removing of the mechanical contaminants and corrosion products depending on the technological parameters.Presented at IAEA Specialist's Meeting on The Influence of Water Chemistry on Fuel Element Cladding Behaviour in Water Cooloed Power Reactor, 6–10 June 1983, Leningrad, USSR.